global¶

Note

requires a Turbo Router Network License.

Routing global configuration.

vrouter running config# routing

ipv4-access-list¶

IPv4 access list.

vrouter running config# routing ipv4-access-list <string>

Access list name.

remark¶

Access list entry comment.

vrouter running config# routing ipv4-access-list <string>
vrouter running ipv4-access-list <string># remark <string>

seq¶

Specify access list to reject or accept.

vrouter running config# routing ipv4-access-list <string>
vrouter running ipv4-access-list <string># seq <uint16> \
...   permit <permit> exact-match true|false \
...   deny <deny> exact-match true|false

List sequence.

permit¶

IPv4 access list deny rules.

permit <permit> exact-match true|false

exact-match¶

Enable or disable exact match of the prefixes.

exact-match true|false

deny¶

IPv4 access list deny rules.

deny <deny> exact-match true|false

exact-match¶

Enable or disable exact match of the prefixes.

exact-match true|false

ipv6-access-list¶

IPv6 access list.

vrouter running config# routing ipv6-access-list <string>

Access list name.

remark¶

Access list entry comment.

vrouter running config# routing ipv6-access-list <string>
vrouter running ipv6-access-list <string># remark <string>

seq¶

Specify access list to reject or accept.

vrouter running config# routing ipv6-access-list <string>
vrouter running ipv6-access-list <string># seq <uint16> \
...   permit <permit> exact-match true|false \
...   deny <deny> exact-match true|false

Access list sequence.

permit¶

IPv6 access list deny rules.

permit <permit> exact-match true|false

exact-match¶

Enable or disable exact match of the prefixes.

exact-match true|false

deny¶

IPv6 access list deny rules.

deny <deny> exact-match true|false

exact-match¶

Enable or disable exact match of the prefixes.

exact-match true|false

logging¶

Logs configuration.

vrouter running config# routing logging

enabled¶

Enable/Disable routing logs.

vrouter running config# routing logging
vrouter running logging# enabled true|false

Default value: true

level¶

Set minimal logging level.

vrouter running config# routing logging
vrouter running logging# level LEVEL

`LEVEL` values	Description
emergency	System is unusable.
alert	Action must be taken immediately.
critical	Critical conditions.
error	Error conditions.
warning	Warning conditions.
notice	Normal but significant condition.
info	Informational messages.
debug	Debug-level messages.

Default value: error

mpls¶

MPLS logging configuration.

vrouter running config# routing logging mpls

ldp¶

Common LDP routers logging configuration.

vrouter running config# routing logging mpls ldp

enabled¶

Enable/disable MPLS LDP logging configuration.

vrouter running config# routing logging mpls ldp
vrouter running ldp# enabled true|false

Default value: true

discovery-hello¶

Direction of discovery messages to log.

vrouter running config# routing logging mpls ldp
vrouter running ldp# discovery-hello DISCOVERY-HELLO

`DISCOVERY-HELLO` values	Description
send	Log sent messages.
receive	Log received messages.
both	Log all messages.

errors¶

Log errors.

vrouter running config# routing logging mpls ldp
vrouter running ldp# errors true|false

Default value: true

events¶

Log event information.

vrouter running config# routing logging mpls ldp
vrouter running ldp# events true|false

Default value: false

labels¶

Log label allocation information.

vrouter running config# routing logging mpls ldp
vrouter running ldp# labels true|false

Default value: false

zebra¶

Log zebra information.

vrouter running config# routing logging mpls ldp
vrouter running ldp# zebra true|false

Default value: false

message¶

Log LDP message information.

vrouter running config# routing logging mpls ldp message

direction¶

Direction of messages to log.

vrouter running config# routing logging mpls ldp message
vrouter running message# direction DIRECTION

`DIRECTION` values	Description
send	Log sent messages.
receive	Log received messages.
both	Log all messages.

Default value: both

detail¶

Log message including periodic Keep Alives.

vrouter running config# routing logging mpls ldp message
vrouter running message# detail true|false

Default value: false

bgp¶

Note

requires a Turbo Router Network License.

Common BGP routers logging configuration.

vrouter running config# routing logging bgp

enabled¶

Enable/disable BGP logging configuration.

vrouter running config# routing logging bgp
vrouter running bgp# enabled true|false

Default value: true

allow-martians¶

Allow martian next hops.

vrouter running config# routing logging bgp
vrouter running bgp# allow-martians true|false

Default value: false

as-4bytes¶

Log AS > 65535 actions.

vrouter running config# routing logging bgp
vrouter running bgp# as-4bytes true|false

Default value: false

as-4bytes-segment¶

Log AS > 65535 aspath segment handling.

vrouter running config# routing logging bgp
vrouter running bgp# as-4bytes-segment true|false

Default value: false

bestpath¶

Log BGP bestpath info.

vrouter running config# routing logging bgp
vrouter running bgp# bestpath BESTPATH

`BESTPATH` values	Description
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

nexthop-tracking¶

Log BGP nexthop tracking.

vrouter running config# routing logging bgp
vrouter running bgp# nexthop-tracking true|false

Default value: false

flowspec¶

Enable flowspec debugging entries.

vrouter running config# routing logging bgp
vrouter running bgp# flowspec true|false

Default value: false

keepalives¶

Log keepalive messages to/from a specific neighbor or all.

vrouter running config# routing logging bgp
vrouter running bgp# keepalives KEEPALIVES

`KEEPALIVES` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
all	Log all keepalive messages.

neighbor-events¶

Log neighbor event messages to/from a specific neighbor or all.

vrouter running config# routing logging bgp
vrouter running bgp# neighbor-events NEIGHBOR-EVENTS

`NEIGHBOR-EVENTS` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
all	Log all neighbor event messages.

update-groups¶

Log update messages (only when BGP is configured as a server).

vrouter running config# routing logging bgp
vrouter running bgp# update-groups true|false

Default value: false

zebra¶

Log zebra/BGP messages for a specific prefix or all.

vrouter running config# routing logging bgp
vrouter running bgp# zebra ZEBRA

`ZEBRA` values	Description
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.
all	Log all messages between Zebra and BGP.

rpki¶

Enable RPKI logging.

vrouter running config# routing logging bgp
vrouter running bgp# rpki true|false

Default value: false

pbr¶

Log policy base routing info.

vrouter running config# routing logging bgp pbr

detail¶

Log policy base routing info with more details.

vrouter running config# routing logging bgp pbr
vrouter running pbr# detail true|false

Default value: false

updates¶

Log inbound and outbound update messages.

vrouter running config# routing logging bgp updates

enabled¶

Enable/Disable log about inbound and outbound update messages.

vrouter running config# routing logging bgp updates
vrouter running updates# enabled true|false

Default value: true

in¶

Log inbound update messages from a specific neighbor or all.

vrouter running config# routing logging bgp updates
vrouter running updates# in IN

`IN` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
all	Log inbound update messages from all neighbors.

Default value: all

out¶

Log outbound update messages from a specific neighbor or all.

vrouter running config# routing logging bgp updates
vrouter running updates# out OUT

`OUT` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
all	Log outbound update messages from all neighbors.

Default value: all

prefix¶

Log update messages to/from a specific network.

vrouter running config# routing logging bgp updates
vrouter running updates# prefix PREFIX

`PREFIX` values	Description
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

vpn¶

Log VPN routes.

vrouter running config# routing logging bgp vpn

label¶

Log VPN label.

vrouter running config# routing logging bgp vpn
vrouter running vpn# label true|false

Default value: false

leak-vrf¶

Log leaks.

vrouter running config# routing logging bgp vpn
vrouter running vpn# leak-vrf LEAK-VRF

`LEAK-VRF` values	Description
to	Log leak to VRF from VPN.
from	Log leak from VRF to VPN.
both	Log all leaks.

route-map-event¶

Log VPN route-map updates.

vrouter running config# routing logging bgp vpn
vrouter running vpn# route-map-event true|false

Default value: false

rip¶

Note

requires a Turbo Router Network License.

Common RIP routers logging configuration.

vrouter running config# routing logging rip

enabled¶

Enable/disable router logging configuration.

vrouter running config# routing logging rip
vrouter running rip# enabled true|false

Default value: true

events¶

Log router events.

vrouter running config# routing logging rip
vrouter running rip# events true|false

Default value: false

packet¶

Log router received/send packet info.

vrouter running config# routing logging rip
vrouter running rip# packet PACKET

`PACKET` values	Description
receive	Log only received packet info.
send	Log only sent packet info.
both	Log all packet info.

Default value: both

zebra¶

Log communication between the router and zebra.

vrouter running config# routing logging rip
vrouter running rip# zebra true|false

Default value: false

ripng¶

Note

requires a Turbo Router Network License.

Common RIPng routers logging configuration.

vrouter running config# routing logging ripng

enabled¶

Enable/disable router logging configuration.

vrouter running config# routing logging ripng
vrouter running ripng# enabled true|false

Default value: true

events¶

Log router events.

vrouter running config# routing logging ripng
vrouter running ripng# events true|false

Default value: false

packet¶

Log router received/send packet info.

vrouter running config# routing logging ripng
vrouter running ripng# packet PACKET

`PACKET` values	Description
receive	Log only received packet info.
send	Log only sent packet info.
both	Log all packet info.

Default value: both

zebra¶

Log communication between the router and zebra.

vrouter running config# routing logging ripng
vrouter running ripng# zebra true|false

Default value: false

ospf¶

Note

requires a Turbo Router Network License.

Common OSPF routers logging configuration.

vrouter running config# routing logging ospf

enabled¶

Enable/disable OSPF logging configuration.

vrouter running config# routing logging ospf
vrouter running ospf# enabled true|false

Default value: true

events¶

Log OSPF event information.

vrouter running config# routing logging ospf
vrouter running ospf# events true|false

Default value: false

ism¶

Log OSPF Interface State Machine information.

vrouter running config# routing logging ospf
vrouter running ospf# ism ISM

`ISM` values	Description
events	Log ISM Event Information.
status	Log ISM Status Information.
timers	Log ISM Timer Information.
all	Log all ISM Information.

lsa¶

Log OSPF Link State Advertisement information.

vrouter running config# routing logging ospf
vrouter running ospf# lsa LSA

`LSA` values	Description
flooding	Log LSA flooding Information.
generate	Log LSA generate Information.
install	Log LSA install Information.
refresh	Log LSA refresh Information.
all	Log all LSA Information.

nsm¶

Log OSPF Neighbor State Machine information.

vrouter running config# routing logging ospf
vrouter running ospf# nsm NSM

`NSM` values	Description
events	Log NSM Event Information.
status	Log NSM Status Information.
timers	Log NSM Timer Information.
all	Log all NSM Information.

nssa¶

Log OSPF nssa information.

vrouter running config# routing logging ospf
vrouter running ospf# nssa true|false

Default value: false

zebra¶

Log zebra information.

vrouter running config# routing logging ospf
vrouter running ospf# zebra ZEBRA

`ZEBRA` values	Description
interface	Log zebra interface information.
redistribute	Log zebra redistribute information.
all	Log zebra interface and redistribute information.

message¶

Log OSPF message information.

vrouter running config# routing logging ospf message <message>

`<message>` values	Description
dd	Log Database Description messages.
hello	Log Hello messages.
ls-ack	Log Link State Acknowledgment messages.
ls-request	Log Link State Request messages.
ls-update	Log Link State Update messages.
all	Log all messages (whatever its type).

direction¶

Direction of messages to log.

vrouter running config# routing logging ospf message <message>
vrouter running message <message># direction DIRECTION

`DIRECTION` values	Description
send	Log sent messages.
receive	Log received messages.
both	Log all messages.

Default value: both

detail¶

Log message details.

vrouter running config# routing logging ospf message <message>
vrouter running message <message># detail true|false

Default value: false

ospf6¶

Note

requires a Turbo Router Network License.

Common OSPF6 routers logging configuration.

vrouter running config# routing logging ospf6

enabled¶

Enable/Disable OSPF6 logging configuration.

vrouter running config# routing logging ospf6
vrouter running ospf6# enabled true|false

Default value: true

abr¶

Log ABR information.

vrouter running config# routing logging ospf6
vrouter running ospf6# abr true|false

Default value: false

asbr¶

Log ASBR information.

vrouter running config# routing logging ospf6
vrouter running ospf6# asbr true|false

Default value: false

events¶

Log events.

vrouter running config# routing logging ospf6
vrouter running ospf6# events true|false

Default value: false

flooding¶

Log flooding information.

vrouter running config# routing logging ospf6
vrouter running ospf6# flooding true|false

Default value: false

interface¶

Log interface information.

vrouter running config# routing logging ospf6
vrouter running ospf6# interface true|false

Default value: false

neighbor¶

Log neighbor information.

vrouter running config# routing logging ospf6
vrouter running ospf6# neighbor NEIGHBOR

`NEIGHBOR` values	Description
events	Log neighbor event information.
state	Log neighbor state information.
all	Log all neighbor information.

route¶

Log route information.

vrouter running config# routing logging ospf6
vrouter running ospf6# route ROUTE

`ROUTE` values	Description
inter-area	Log inter area route calculation.
intra-area	Log intra area route calculation.
memory	Log route memory use..
table	Log route table calculation.
all	Log all route information.

spf¶

Log SPF calculation.

vrouter running config# routing logging ospf6
vrouter running ospf6# spf SPF

`SPF` values	Description
database	Log number of LSAs at SPF calculation time.
process	Log detailed SPF process.
time	Measure time taken by SPF calculation.
all	Log all SPF messages.

zebra¶

Log messages between OSPF router and zebra.

vrouter running config# routing logging ospf6
vrouter running ospf6# zebra ZEBRA

`ZEBRA` values	Description
send	Log messages sent to zebra.
receive	Log messages received from zebra.
both	Log messages to/from zebra.

border-routers¶

Log border routers information.

vrouter running config# routing logging ospf6 border-routers

summary¶

Log border router information in a specific area.

vrouter running config# routing logging ospf6 border-routers
vrouter running border-routers# summary true|false

Default value: false

area-id¶

Log border router information in a specific area.

vrouter running config# routing logging ospf6 border-routers
vrouter running border-routers# area-id AREA-ID

AREA-ID

An IPv4 address.

router-id¶

Log information from a specific border router.

vrouter running config# routing logging ospf6 border-routers
vrouter running border-routers# router-id ROUTER-ID

ROUTER-ID

An IPv4 address.

lsa¶

Configure Link State Advertisements logging information.

vrouter running config# routing logging ospf6
vrouter running ospf6# lsa <lsa> level LEVEL

`<lsa>` values	Description
as-external	Log as-external LSAs.
inter-prefix	Log inter area prefix LSAs.
inter-router	LOG inter router LSAs.
intra-prefix	LOG intra area prefix LSAs.
link	LOG link LSAs.
network	LOG network LSAs.
router	LOG router LSAs.
all	LOG all LSA information.

level¶

LSA log level.

level LEVEL

`LEVEL` values	Description
examine	Dump LSAs.
flooding	Log LSA’s internal information.
originate	Log details of LSAs.
all	Log all information about LSAs.

Default value: all

message¶

Log OSPF message information.

vrouter running config# routing logging ospf6
vrouter running ospf6# message <message> direction DIRECTION

`<message>` values	Description
dd	Log Database Description messages.
hello	Log Hello messages.
ls-ack	Log Link State Acknowledgment messages.
ls-request	Log Link State Request messages.
ls-update	Log Link State Update messages.
all	Log all messages.

direction¶

Direction of messages to log.

direction DIRECTION

`DIRECTION` values	Description
send	Log sent messages.
receive	Log received messages.
both	Log all messages.

Default value: both

ipv4-prefix-list¶

IPv4 prefix list.

vrouter running config# routing ipv4-prefix-list <string>

Prefix list name.

seq¶

Prefix list sequence.

vrouter running config# routing ipv4-prefix-list <string>
vrouter running ipv4-prefix-list <string># seq <uint32> address ADDRESS policy POLICY \
... ge <uint8> le <uint8>

Sequence number.

address¶

Prefix to match (any if not set).

address ADDRESS

ADDRESS

An IPv4 prefix: address and CIDR mask.

policy (mandatory)¶

Prefix list policy.

policy POLICY

`POLICY` values	Description
deny	Specify packets to reject.
permit	Specify packets to forward.

ge¶

Minimum prefix length to be matched.

ge <uint8>

le¶

Maximum prefix length to be matched.

le <uint8>

ipv6-prefix-list¶

IPv6 prefix list.

vrouter running config# routing ipv6-prefix-list <string>

Prefix list name.

seq¶

Prefix list sequence.

vrouter running config# routing ipv6-prefix-list <string>
vrouter running ipv6-prefix-list <string># seq <uint32> address ADDRESS policy POLICY \
... ge <uint8> le <uint8>

Sequence number.

address¶

Prefix to match (any if not set).

address ADDRESS

ADDRESS

An IPv6 prefix: address and CIDR mask.

policy (mandatory)¶

Prefix list policy.

policy POLICY

`POLICY` values	Description
deny	Specify packets to reject.
permit	Specify packets to forward.

ge¶

Minimum prefix length to be matched.

ge <uint8>

le¶

Maximum prefix length to be matched.

le <uint8>

route-map¶

Route map list.

vrouter running config# routing route-map <string>

Route map name.

seq¶

Route map sequence.

vrouter running config# routing route-map <string> seq <uint16>

Sequence number.

policy (mandatory)¶

Matching policy.

vrouter running config# routing route-map <string> seq <uint16>
vrouter running seq <uint16># policy POLICY

`POLICY` values	Description
deny	Route map denies set operations.
permit	Route map permits set operations.

description¶

Route-map description.

vrouter running config# routing route-map <string> seq <uint16>
vrouter running seq <uint16># description <string>

call¶

Jump to another Route-Map after match+set.

vrouter running config# routing route-map <string> seq <uint16>
vrouter running seq <uint16># call <string>

on-match¶

Exit policy on matches.

vrouter running config# routing route-map <string> seq <uint16>
vrouter running seq <uint16># on-match ON-MATCH

`ON-MATCH` values	Description
<uint16>	No description.
next	Next clause.

match¶

Match values from routing table.

vrouter running config# routing route-map <string> seq <uint16> match

as-path¶

Match BGP AS path list.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# as-path <string>

interface¶

Match first hop interface of route.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# interface INTERFACE

INTERFACE

An interface name.

local-preference¶

Match local-preference metric value.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# local-preference <uint32>

mac-address¶

Match MAC Access-list name.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# mac-address <string>

metric¶

Match metric value.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# metric <uint32>

origin¶

BGP origin code.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# origin ORIGIN

`ORIGIN` values	Description
egp	Remote EGP.
igp	Local IGP.
incomplete	Unknown heritage.

peer¶

Match peer address.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# peer PEER

`PEER` values	Description
local	Static or redistributed routes.
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
<ifname>	An interface name.

probability¶

Match portion of routes defined by percentage value.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# probability <uint8>

source-instance¶

Match the protocol’s instance number.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# source-instance <uint8>

source-protocol¶

Match protocol via which the route was learnt.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# source-protocol SOURCE-PROTOCOL

`SOURCE-PROTOCOL` values	Description
babel	BABEL protocol.
bgp	BGP protocol.
connected	Routes from directly connected peer.
eigrp	EIGRP protocol.
isis	ISIS protocol.
kernel	Routes from kernel.
nhrp	NHRP protocol.
ospf	OSPF protocol.
ospf6	OSPF6 protocol.
pim	PIM protocol.
rip	RIP protocol.
ripng	RIPNG protocol.
sharp	SHARP process.
static	Statically configured routes.
system	Routes from system configuration.

tag¶

Match tag of route.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# tag <uint32>

extcommunity¶

Match BGP/VPN extended community list.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# extcommunity <leafref>

rpki¶

RPKI specific settings.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# rpki RPKI

`RPKI` values	Description
valid	Valid prefix.
invalid	Invalid prefix.
notfound	Prerfix not found.

evpn¶

Ethernet Virtual Private Network.

vrouter running config# routing route-map <string> seq <uint16> match evpn

default-route¶

If true, mark as default EVPN type-5 route.

vrouter running config# routing route-map <string> seq <uint16> match evpn
vrouter running evpn# default-route true|false

route-type¶

Match route type.

vrouter running config# routing route-map <string> seq <uint16> match evpn
vrouter running evpn# route-type ROUTE-TYPE

`ROUTE-TYPE` values	Description
macip	Mac-ip route.
multicast	IMET route.
prefix	Prefix route.

vni¶

VNI ID.

vrouter running config# routing route-map <string> seq <uint16> match evpn
vrouter running evpn# vni <uint32>

route-distinguisher¶

Route distinguisher.

vrouter running config# routing route-map <string> seq <uint16> match evpn
vrouter running evpn# route-distinguisher ROUTE-DISTINGUISHER

`ROUTE-DISTINGUISHER` values	Description
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.

ip¶

IP information.

vrouter running config# routing route-map <string> seq <uint16> match ip

address¶

Match address of route.

vrouter running config# routing route-map <string> seq <uint16> match ip address

access-list¶

Matches the specified access list.

vrouter running config# routing route-map <string> seq <uint16> match ip address
vrouter running address# access-list ACCESS-LIST

`ACCESS-LIST` values	Description
<uint16>	No description.
<string>	No description.

prefix-list¶

Matches the specified prefix list.

vrouter running config# routing route-map <string> seq <uint16> match ip address
vrouter running address# prefix-list <string>

prefix-len¶

Matches the specified prefix length.

vrouter running config# routing route-map <string> seq <uint16> match ip address
vrouter running address# prefix-len <uint8>

next-hop¶

Match next-hop address of route.

vrouter running config# routing route-map <string> seq <uint16> match ip next-hop

access-list¶

Matches the specified access list.

vrouter running config# routing route-map <string> seq <uint16> match ip next-hop
vrouter running next-hop# access-list ACCESS-LIST

`ACCESS-LIST` values	Description
<uint16>	No description.
<string>	No description.

prefix-list¶

Matches the specified prefix list.

vrouter running config# routing route-map <string> seq <uint16> match ip next-hop
vrouter running next-hop# prefix-list <string>

prefix-len¶

Matches the specified prefix length.

vrouter running config# routing route-map <string> seq <uint16> match ip next-hop
vrouter running next-hop# prefix-len <uint8>

route-source¶

Match advertising source address of route.

vrouter running config# routing route-map <string> seq <uint16> match ip route-source

access-list¶

Matches the specified access list.

vrouter running config# routing route-map <string> seq <uint16> match ip route-source
vrouter running route-source# access-list ACCESS-LIST

`ACCESS-LIST` values	Description
<uint16>	No description.
<string>	No description.

prefix-list¶

Matches the specified prefix list.

vrouter running config# routing route-map <string> seq <uint16> match ip route-source
vrouter running route-source# prefix-list <string>

ipv6¶

IPv6 information.

vrouter running config# routing route-map <string> seq <uint16> match ipv6

address¶

Match IPv6 address of route.

vrouter running config# routing route-map <string> seq <uint16> match ipv6 address

access-list¶

Matches the specified access list.

vrouter running config# routing route-map <string> seq <uint16> match ipv6 address
vrouter running address# access-list <string>

prefix-list¶

Matches the specified prefix list.

vrouter running config# routing route-map <string> seq <uint16> match ipv6 address
vrouter running address# prefix-list <string>

prefix-len¶

Matches the specified prefix length.

vrouter running config# routing route-map <string> seq <uint16> match ipv6 address
vrouter running address# prefix-len <uint8>

next-hop¶

Match IPv6 next-hop address of route.

vrouter running config# routing route-map <string> seq <uint16> match ipv6 next-hop

address¶

IPv6 address of next hop.

vrouter running config# routing route-map <string> seq <uint16> match ipv6 next-hop
vrouter running next-hop# address ADDRESS

ADDRESS

An IPv6 address.

community¶

Match BGP community list.

vrouter running config# routing route-map <string> seq <uint16> match
vrouter running match# community id <leafref> exact-match true|false

id (mandatory)¶

Community-list number or name.

id <leafref>

exact-match¶

If true, do exact matching of communities.

exact-match true|false

set¶

Set values in destination routing protocol.

vrouter running config# routing route-map <string> seq <uint16> set

table¶

Export route to non-main table.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# table <uint32>

atomic-aggregate¶

Enable or disable BGP atomic aggregate attribute.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# atomic-aggregate true|false

label-index¶

Label index value.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# label-index <uint32>

local-preference¶

BGP local preference path attribute.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# local-preference <uint32>

metric¶

Metric value for destination routing protocol.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# metric METRIC

`METRIC` values	Description
<uint32>	No description.
add-metric	Add metric.
add-rtt	Add round trip time.
substract-metric	Subtract metric.
substract-rtt	Subtract round trip time.
rtt	Assign round trip time.

metric-type¶

Type of metric.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# metric-type METRIC-TYPE

`METRIC-TYPE` values	Description
type-1	OSPF6 external type 1 metric.
type-2	OSPF6 external type 2 metric.

origin¶

BGP origin code.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# origin ORIGIN

`ORIGIN` values	Description
egp	Remote EGP.
igp	Local IGP.
incomplete	Unknown heritage.

originator-id¶

BGP originator ID attribute.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# originator-id ORIGINATOR-ID

ORIGINATOR-ID

An IPv4 address.

src¶

Src address for route.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# src SRC

`SRC` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

tag¶

Tag value for routing protocol.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# tag <uint32>

weight¶

BGP weight for routing table.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# weight <uint32>

comm-list-delete¶

Set BGP community list (for deletion).

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# comm-list-delete <leafref>

aggregator¶

BGP aggregator attribute.

vrouter running config# routing route-map <string> seq <uint16> set
vrouter running set# aggregator as <uint32> address ADDRESS

as (mandatory)¶

AS number of BGP aggregator.

as <uint32>

address (mandatory)¶

IP address of aggregator.

address ADDRESS

ADDRESS

An IPv4 address.

as-path¶

Transform BGP AS-path attribute.

vrouter running config# routing route-map <string> seq <uint16> set as-path

exclude¶

AS numbers to exclude from the as-path.

vrouter running config# routing route-map <string> seq <uint16> set as-path
vrouter running as-path# exclude <uint32>

prepend¶

Prepend to the as-path.

vrouter running config# routing route-map <string> seq <uint16> set as-path prepend

last-as¶

Use the peer’s AS-number; number of times to insert.

vrouter running config# routing route-map <string> seq <uint16> set as-path prepend
vrouter running prepend# last-as <uint8>

asn¶

AS number to prepend to the as-path list.

vrouter running config# routing route-map <string> seq <uint16> set as-path prepend asn <uint8>

<uint8>

Order of the AS number.

<uint32> (mandatory)¶

AS number.

vrouter running config# routing route-map <string> seq <uint16> set as-path prepend asn <uint8>
vrouter running asn <uint8># <uint32>

ip¶

IP information.

vrouter running config# routing route-map <string> seq <uint16> set ip

next-hop¶

Next hop address.

vrouter running config# routing route-map <string> seq <uint16> set ip
vrouter running ip# next-hop NEXT-HOP

`NEXT-HOP` values	Description
<A.B.C.D>	An IPv4 address.
peer-address	Use peer address (for BGP only).
unchanged	Don’t modify existing Next hop address.

ipv4¶

IPv4 information.

vrouter running config# routing route-map <string> seq <uint16> set ipv4

vpn¶

VPN information.

vrouter running config# routing route-map <string> seq <uint16> set ipv4 vpn

next-hop¶

VPN next-hop address.

vrouter running config# routing route-map <string> seq <uint16> set ipv4 vpn
vrouter running vpn# next-hop NEXT-HOP

NEXT-HOP

An IPv4 address.

ipv6¶

IPv6 information.

vrouter running config# routing route-map <string> seq <uint16> set ipv6

next-hop¶

IPv6 next hop address.

vrouter running config# routing route-map <string> seq <uint16> set ipv6 next-hop

global¶

IPv6 global address.

vrouter running config# routing route-map <string> seq <uint16> set ipv6 next-hop
vrouter running next-hop# global GLOBAL

GLOBAL

An IPv6 address.

local¶

IPv6 local address.

vrouter running config# routing route-map <string> seq <uint16> set ipv6 next-hop
vrouter running next-hop# local LOCAL

LOCAL

An IPv6 link-local address which is in the range of fe80::/10.

peer-address¶

If true, use peer address (for BGP only).

vrouter running config# routing route-map <string> seq <uint16> set ipv6 next-hop
vrouter running next-hop# peer-address true|false

prefer-global¶

If true, prefer global over link-local if both exist.

vrouter running config# routing route-map <string> seq <uint16> set ipv6 next-hop
vrouter running next-hop# prefer-global true|false

vpn¶

VPN information.

vrouter running config# routing route-map <string> seq <uint16> set ipv6 vpn

next-hop¶

VPN next-hop address.

vrouter running config# routing route-map <string> seq <uint16> set ipv6 vpn
vrouter running vpn# next-hop NEXT-HOP

NEXT-HOP

An IPv6 address.

community¶

BGP community attribute.

vrouter running config# routing route-map <string> seq <uint16> set community

none¶

Set community to none.

vrouter running config# routing route-map <string> seq <uint16> set community
vrouter running community# none

attribute¶

BGP community attribute.

vrouter running config# routing route-map <string> seq <uint16> set community
vrouter running community# attribute ATTRIBUTE

`ATTRIBUTE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.
additive	Additive.

extcommunity¶

BGP extended community attribute.

vrouter running config# routing route-map <string> seq <uint16> set extcommunity

rt¶

Route Target extended community.

vrouter running config# routing route-map <string> seq <uint16> set extcommunity
vrouter running extcommunity# rt RT

`RT` values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

soo¶

Site-of-Origin extended community.

vrouter running config# routing route-map <string> seq <uint16> set extcommunity
vrouter running extcommunity# soo SOO

`SOO` values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

bgp¶

Note

requires a Turbo Router Network License.

Common BGP routers configuration.

vrouter running config# routing bgp

route-map-delay¶

Time in secs to wait before processing route-map changes.

vrouter running config# routing bgp
vrouter running bgp# route-map-delay <uint16>

Default value: 5

rpki-ssh-key (state only)¶

Available SSH key pairs.

vrouter> show state routing bgp rpki-ssh-key

community-list¶

Add a community list entry.

vrouter running config# routing bgp community-list <community-list>

`<community-list>` values	Description
<uint8>	List name.
<string>	List name.

policy¶

Specify communities to reject or accept.

vrouter running config# routing bgp community-list <community-list>
vrouter running community-list <community-list># policy <uint16> POLICY COMMUNITY

Priority of the policy. Lesser is the value, greater is the priority.

POLICY (mandatory)¶

Policy to apply to the specified communities.

POLICY

`POLICY` values	Description
deny	Specified communities will be rejected.
permit	Specified communities will be accepted.

COMMUNITY¶

Communities on which the policy should be applied.

COMMUNITY

`COMMUNITY` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

community-list-expanded¶

Add an expanded community list entry.

vrouter running config# routing bgp community-list-expanded <community-list-expanded>

`<community-list-expanded>` values	Description
<uint16>	List name.
<string>	List name.

policy¶

Specify communities to reject or accept.

vrouter running config# routing bgp community-list-expanded <community-list-expanded>
vrouter running community-list-expanded <community-list-expanded># policy <uint16> \
... POLICY COMMUNITY

Priority of the policy. Lesser is the value, greater is the priority.

POLICY (mandatory)¶

Policy to apply to the specified communities.

POLICY

`POLICY` values	Description
deny	Specified communities will be rejected.
permit	Specified communities will be accepted.

COMMUNITY¶

Communities on which the policy should be applied.

COMMUNITY

`COMMUNITY` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

extcommunity-list¶

Add an extended community list entry.

vrouter running config# routing bgp extcommunity-list <extcommunity-list>

`<extcommunity-list>` values	Description
<uint8>	List name.
<string>	List name.

policy¶

Specify extended communities to reject or accept.

vrouter running config# routing bgp extcommunity-list <extcommunity-list>
vrouter running extcommunity-list <extcommunity-list># policy <uint16> POLICY \
... rt RT soo SOO

Priority of the policy. Lesser is the value, greater is the priority.

POLICY (mandatory)¶

Policy to apply to the specified extcommunities.

POLICY

`POLICY` values	Description
deny	Specified extcommunities will be reject.
permit	Specified extcommunities will be accept.

rt¶

Extended community route target to reject.

rt RT

`RT` values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

soo¶

Extended community site of origin to reject.

soo SOO

`SOO` values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

extcommunity-list-expanded¶

Add an expanded extended community list entry.

vrouter running config# routing bgp extcommunity-list-expanded <extcommunity-list-expanded>

`<extcommunity-list-expanded>` values	Description
<uint16>	List name.
<string>	List name.

policy¶

Specify extended communities to reject or accept.

vrouter running config# routing bgp extcommunity-list-expanded <extcommunity-list-expanded>
vrouter running extcommunity-list-expanded <extcommunity-list-expanded># policy <uint16> \
... POLICY <string>

Priority of the policy. Lesser is the value, greater is the priority.

POLICY (mandatory)¶

Policy to apply to the specified extcommunities.

POLICY

`POLICY` values	Description
deny	Specified extcommunities will be reject.
permit	Specified extcommunities will be accept.

<string>¶

Communities on which the policy should be applied.

<string>

as-path-access-list¶

BGP autonomous system path filter.

vrouter running config# routing bgp as-path-access-list <string>

Access list name.

policy¶

Specify AS path access list to reject or accept.

vrouter running config# routing bgp as-path-access-list <string>
vrouter running as-path-access-list <string># policy <uint16> POLICY <string>

Priority of the policy. Lesser is the value, greater is the priority.

POLICY (mandatory)¶

Policy to apply to the specified regular expression that match AS paths.

POLICY

`POLICY` values	Description
deny	Specified access list will be rejected.
permit	Specified access list will be accepted.

<string>¶

Regular expression to match the BGP AS paths on which the policy should be applied.

<string>