3.2.32. high availability¶

HA groups¶

Note

requires a Turbo Router Network License.

Global high-availability configuration.

vrouter running config# ha

group¶

The list of high-availability groups on the device, used to advertise an high-availability status. Each group can be associated to one notifier and several subscribers.

vrouter running config# ha group <group>

<group>

An high-availability group.

state¶

Force the high-availability state of this group.

vrouter running config# ha group <group>
vrouter running group <group># state STATE

`STATE` values	Description
master	Set master state.
backup	Set backup state.

HA neighbor¶

Note

requires a Turbo Router Network License.

High-availability neighbor configuration.

vrouter running config# vrf <vrf> ha-neighbor

enabled¶

Enable/Disable HA neighbor in this VRF.

vrouter running config# vrf <vrf> ha-neighbor
vrouter running ha-neighbor# enabled true|false

Default value: true

node-id (mandatory)¶

The local node ID.

vrouter running config# vrf <vrf> ha-neighbor
vrouter running ha-neighbor# node-id <uint8>

local-address (mandatory)¶

The local IP address used to accept remote peer connections.

vrouter running config# vrf <vrf> ha-neighbor
vrouter running ha-neighbor# local-address LOCAL-ADDRESS

`LOCAL-ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

listen-ha-group (mandatory)¶

The HA group to be monitored.

vrouter running config# vrf <vrf> ha-neighbor
vrouter running ha-neighbor# listen-ha-group <string>

interface (mandatory)¶

Interface used for peer discovery in multicast mode.

vrouter running config# vrf <vrf> ha-neighbor
vrouter running ha-neighbor# interface INTERFACE

INTERFACE

An interface name.

state (state only)¶

The high-availability state.

vrouter> show state vrf <vrf> ha-neighbor state

HA conntrack¶

Note

requires a Turbo Router Network License.

High-availability conntrack configuration.

vrouter running config# vrf <vrf> ha-conntrack

enabled¶

Enable/Disable HA conntrack in this VRF.

vrouter running config# vrf <vrf> ha-conntrack
vrouter running ha-conntrack# enabled true|false

Default value: true

local-address (mandatory)¶

The local IP address used to accept remote peer connections.

vrouter running config# vrf <vrf> ha-conntrack
vrouter running ha-conntrack# local-address LOCAL-ADDRESS

`LOCAL-ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

listen-ha-group (mandatory)¶

The HA group to be monitored.

vrouter running config# vrf <vrf> ha-conntrack
vrouter running ha-conntrack# listen-ha-group <string>

interface (mandatory)¶

Interface used to send synchronization messages.

vrouter running config# vrf <vrf> ha-conntrack
vrouter running ha-conntrack# interface INTERFACE

INTERFACE

An interface name.

state (state only)¶

The high-availability conntrack state.

vrouter> show state vrf <vrf> ha-conntrack state

protocol-list¶

Configure protocols to accept or ignore.

vrouter running config# vrf <vrf> ha-conntrack protocol-list

accept (mandatory)¶

Accept or ignore protocols.

vrouter running config# vrf <vrf> ha-conntrack protocol-list
vrouter running protocol-list# accept true|false

protocol¶

Protocol list to accept or ignore.

vrouter running config# vrf <vrf> ha-conntrack protocol-list
vrouter running protocol-list# protocol PROTOCOL

`PROTOCOL` values	Description
tcp	Add TCP in the list.
sctp	Add SCTP in the list.
dccp	Add DCCP in the list.
udp	Add UDP in the list.
icmp	Add ICMP in the list.
ipv6-icmp	Add IPv6 ICMP in the list.

address-list¶

Configure addresses to accept or ignore.

vrouter running config# vrf <vrf> ha-conntrack address-list

accept (mandatory)¶

Accept or ignore addresses.

vrouter running config# vrf <vrf> ha-conntrack address-list
vrouter running address-list# accept true|false

address¶

Address list to accept or ignore.

vrouter running config# vrf <vrf> ha-conntrack address-list
vrouter running address-list# address ADDRESS

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.