segment-routing¶

Note

requires a Product License.

The segment routing configuration.

vsr running config# vrf <vrf> routing segment-routing

enabled¶

Enable the segment routing service.

vsr running config# vrf <vrf> routing segment-routing
vsr running segment-routing# enabled true|false

traffic-engineering¶

The traffic engineering configuration.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering

mpls-te-database¶

Use the traffic engineering database from the IGP routing protocol in the MPLS domain. The database contains information about the topology nodes and the links in the MPLS domain.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering mpls-te-database

enabled¶

Enable the traffic engineering database fill from the remote IGP data.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering mpls-te-database
vsr running mpls-te-database# enabled true|false

Default value: false

import¶

The list of IGP protocols used for remote data import.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering mpls-te-database import <import>

The IGP protocol type.

flex-algorithm¶

Import the Flex-Algorithm information from the given routing instance. The segment routing service carries requests to a given routing instance that implements Flex-Algorithm service, by requesting to resolve an LSP path for a given endpoint in a given Flexible-Algorithm number.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering flex-algorithm

import¶

The list of IGP protocols to consider when requesting Flexible- Algorithm service.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering flex-algorithm import <import>

The IGP protocol type.

instance¶

Set the IS-IS routing instance.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering flex-algorithm import <import>
vsr running import <import># instance <string>

segment-list¶

Create the list of segments, each segment represents a specific source-routed path to send traffic, from the headend to to the endpoint of the corresponding segment routing policy.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering segment-list <string>

The name of the segment list.

segment¶

Configure the segment, the segment stands for the segment identifier SID, and can be expressed either as an MPLS values or a generic identifier (NAI, IP adjacencies).

vsr running config# vrf <vrf> routing segment-routing traffic-engineering segment-list <string> segment <uint32>

Set the segment index to identify the rank and the order of the segment.

sid-label¶

The MPLS label that identifies the network segment.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering segment-list <string> segment <uint32>
vsr running segment <uint32># sid-label SID-LABEL

SID-LABEL

The 20-bit label value in an MPLS label stack as specified in RFC 3032. This label value does not include the encodings of traffic class and time to live (TTL). The label range specified by this type is for general use, with special-purpose MPLS label values excluded.

nai¶

The segment node or adjacency identifier.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering segment-list <string> segment <uint32> nai

adjacency¶

The NAI adjacency configuration. In the network segment the adjacency is defined by the IPs configured on the local and remote interfaces connected to that segment.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering segment-list <string> segment <uint32> nai adjacency

source¶

The adjacency source IP address.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering segment-list <string> segment <uint32> nai adjacency
vsr running adjacency# source SOURCE

SOURCE

An IPv4 or IPv6 address.

destination¶

The adjacency destination IP address.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering segment-list <string> segment <uint32> nai adjacency
vsr running adjacency# destination DESTINATION

DESTINATION

An IPv4 or IPv6 address.

triggered-policies¶

Enable on demand policies from BGP, as defined in RFC9256, chapter 8.5. When BGP receives a colored route with a given next hop, BGP triggers a request to the segment routing traffic engineering service. A policy template matching the incoming colored route will be used to create a dynamic policy. A segment routing policy will be created and made available for the incoming BGP route.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies

binding-sid-range¶

The MPLS label range to use for allocating the BSIDs when instantiating segment routing policies triggered by BGP. The label range must not conflict with the SRGB and SRLB ranges chosen by the IGP used. Also, the BSIDs locally configured on the other segment routing policies must not conflict with the configured range.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies binding-sid-range

lower-bound¶

The binding segment identifier range lower bound.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies binding-sid-range
vsr running binding-sid-range# lower-bound <uint32>

Default value: 24000

upper-bound¶

The binding segment identifier range upper bound.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies binding-sid-range
vsr running binding-sid-range# upper-bound <uint32>

Default value: 25999

policy-template¶

Configure the segment routing policy template. It consists of a policy indexed by color that includes a dynamic candidate path. When BGP receives a colored route with a given next hop, and that color matches the color of the policy-template, then a dynamic segment routing policy configured for the next hop and the policy will be created.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies policy-template <uint32>

The color of the segment routing policy template.

name¶

The name of the segment routing policy template.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies policy-template <uint32>
vsr running policy-template <uint32># name <string>

candidate-path¶

The list of candidate paths configured for the template policy. The candidate paths will be used when a request from BGP will match the color of the segment routing template policy.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies policy-template <uint32> candidate-path <uint32>

Set the preference value for the candidate path. If valid, the candidate-path with the highest preference value will be chosen.

name (mandatory)¶

The name of the policy template candidate path.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies policy-template <uint32> candidate-path <uint32>
vsr running candidate-path <uint32># name <string>

type (mandatory)¶

Set the type of the policy template candidate path.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies policy-template <uint32> candidate-path <uint32>
vsr running candidate-path <uint32># type TYPE

TYPE	A Flex-Algorithm candidate path relies on the Flex-Algorithm implementation that an IGP provides. For a given endpoint, the IGP provides a segment-list obtained by the constrained SPF algorithm. The returned segment list dynamically adapts to routing changes.

algorithm (mandatory)¶

The Flex-Algorithm identifier of the policy template candidate path.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering triggered-policies policy-template <uint32> candidate-path <uint32>
vsr running candidate-path <uint32># algorithm <uint8>

policy¶

Configure the segment routing policy as defined in RFC9256, chapter 2. An SR policy is an instance that defines an LSP path between the local headend, and a given endpoint for a given colored traffic. The routes which share the same endpoint and that are marked with the same color, will follow the segment routing policy LSP path.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering policy color <uint32> endpoint <endpoint>

The color of the segment routing policy.

An IPv4 or IPv6 address.

name¶

The name of the segment routing policy.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering policy color <uint32> endpoint <endpoint>
vsr running policy color <uint32> endpoint <endpoint># name <string>

binding-sid¶

The binding segment identifier (BSID) of a segment routing policy, as per RFC9256, chapter 6. If set, this value will be used by the selected active candidate path. In MPLS domain, the value is an MPLS label value, and must not conflict with the SRGB and SRLB pools defined in the segment routing igp.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering policy color <uint32> endpoint <endpoint>
vsr running policy color <uint32> endpoint <endpoint># binding-sid BINDING-SID

BINDING-SID

The 20-bit label value in an MPLS label stack as specified in RFC 3032. This label value does not include the encodings of traffic class and time to live (TTL). The label range specified by this type is for general use, with special-purpose MPLS label values excluded.

status (state only)¶

The status of the traffic engineering policy. An ‘active’ policy implies that a segment list is available in the segment routing dataplane. The possbile values are Active and Inactive.

vsr> show state vrf <vrf> routing segment-routing traffic-engineering policy color <uint32> endpoint <endpoint> status

candidate-path¶

The list of candidate paths. A segment routing policy is associated with a list of one or more candidate paths. Each candidate path provides a segment list to the segment routing policy, which is either explicitly configured, or dynamically obtained via IGP information.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering policy color <uint32> endpoint <endpoint> candidate-path <uint32>

Set the preference value for the candidate path. If valid, the candidate-path with the highest preference value is chosen.

name (mandatory)¶

The name of the candidate path.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering policy color <uint32> endpoint <endpoint> candidate-path <uint32>
vsr running candidate-path <uint32># name <string>

type (mandatory)¶

Set the type of the candidate path.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering policy color <uint32> endpoint <endpoint> candidate-path <uint32>
vsr running candidate-path <uint32># type TYPE

`TYPE` values	Description
explicit	Set the explicit candidate path type which means that the candidate path is expressed as a segment list.
flex-algorithm	A Flex-Algorithm candidate path relies on the Flex-Algorithm implementation that an IGP provides. For a given endpoint, the IGP provides a segment-list obtained by the constrained SPF algorithm. The returned segment list dynamically adapts to routing changes.

algorithm (mandatory)¶

The Flex-Algorithm identifier for the candidate path.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering policy color <uint32> endpoint <endpoint> candidate-path <uint32>
vsr running candidate-path <uint32># algorithm <uint8>

segment-list¶

The name of segment list to use as LSP.

vsr running config# vrf <vrf> routing segment-routing traffic-engineering policy color <uint32> endpoint <endpoint> candidate-path <uint32>
vsr running candidate-path <uint32># segment-list <leafref>