Root commands¶
Note
requires a Product License.
Routing global configuration.
vsr running config# routing
ipv4-access-list¶
IPv4 access list.
vsr running config# routing ipv4-access-list <string>{1,max}
|
Access list name. |
remark¶
Access list entry comment.
vsr running config# routing ipv4-access-list <string>{1,max}
vsr running ipv4-access-list <string>{1,max}# remark <string>{1,100}
seq¶
Specify access list to reject or accept.
vsr running config# routing ipv4-access-list <string>{1,max}
vsr running ipv4-access-list <string>{1,max}# seq <uint16> \
... permit <permit> exact-match true|false \
... deny <deny> exact-match true|false
|
List sequence. |
ipv6-access-list¶
IPv6 access list.
vsr running config# routing ipv6-access-list <string>{1,max}
|
Access list name. |
remark¶
Access list entry comment.
vsr running config# routing ipv6-access-list <string>{1,max}
vsr running ipv6-access-list <string>{1,max}# remark <string>{1,100}
seq¶
Specify access list to reject or accept.
vsr running config# routing ipv6-access-list <string>{1,max}
vsr running ipv6-access-list <string>{1,max}# seq <uint16> \
... permit <permit> exact-match true|false \
... deny <deny> exact-match true|false
|
Access list sequence. |
logging¶
Logs configuration.
vsr running config# routing logging
enabled¶
Enable/Disable routing logs.
vsr running config# routing logging
vsr running logging# enabled true|false
- Default value
true
level¶
Set minimal logging level.
vsr running config# routing logging
vsr running logging# level LEVEL
|
Description |
|---|---|
|
System is unusable. |
|
Action must be taken immediately. |
|
Critical conditions. |
|
Error conditions. |
|
Warning conditions. |
|
Normal but significant condition. |
|
Informational messages. |
|
Debug-level messages. |
- Default value
error
mpls¶
MPLS logging configuration.
vsr running config# routing logging mpls
ldp¶
Common LDP routers logging configuration.
vsr running config# routing logging mpls ldp
enabled¶
Enable/disable MPLS LDP logging configuration.
vsr running config# routing logging mpls ldp
vsr running ldp# enabled true|false
- Default value
true
discovery-hello¶
Direction of discovery messages to log.
vsr running config# routing logging mpls ldp
vsr running ldp# discovery-hello DISCOVERY-HELLO
|
Description |
|---|---|
|
Log sent messages. |
|
Log received messages. |
|
Log all messages. |
errors¶
Log errors.
vsr running config# routing logging mpls ldp
vsr running ldp# errors true|false
- Default value
true
events¶
Log event information.
vsr running config# routing logging mpls ldp
vsr running ldp# events true|false
- Default value
false
labels¶
Log label allocation information.
vsr running config# routing logging mpls ldp
vsr running ldp# labels true|false
- Default value
false
zebra¶
Log zebra information.
vsr running config# routing logging mpls ldp
vsr running ldp# zebra true|false
- Default value
false
message¶
Log LDP message information.
vsr running config# routing logging mpls ldp message
direction¶
Direction of messages to log.
vsr running config# routing logging mpls ldp message
vsr running message# direction DIRECTION
|
Description |
|---|---|
|
Log sent messages. |
|
Log received messages. |
|
Log all messages. |
- Default value
both
detail¶
Log message including periodic Keep Alives.
vsr running config# routing logging mpls ldp message
vsr running message# detail true|false
- Default value
false
base¶
Base logging configuration.
vsr running config# routing logging base
enabled¶
Enable/Disable base logs.
vsr running config# routing logging base
vsr running base# enabled true|false
- Default value
true
events¶
Configure event logs.
vsr running config# routing logging base events
enabled¶
If true, log when an event happens in the routing framework.
vsr running config# routing logging base events
vsr running events# enabled true|false
- Default value
true
kernel¶
Enable/Disable base kernel logs.
vsr running config# routing logging base kernel
enabled¶
If true, log when messages are sent or received from the kernel.
vsr running config# routing logging base kernel
vsr running kernel# enabled true|false
- Default value
true
msgdump-recv¶
If true, log the content of the messages received from the kernel.
vsr running config# routing logging base kernel
vsr running kernel# msgdump-recv true|false
msgdump-send¶
If true, log the content of the messages sent to the kernel.
vsr running config# routing logging base kernel
vsr running kernel# msgdump-send true|false
nexthop-tracking¶
Enable/Disable nexthop tracking logs.
vsr running config# routing logging base nexthop-tracking
enabled¶
If true, add logs about nexthop tracking.
vsr running config# routing logging base nexthop-tracking
vsr running nexthop-tracking# enabled true|false
- Default value
true
details¶
If true, add detailed logs about nexthop tracking.
vsr running config# routing logging base nexthop-tracking
vsr running nexthop-tracking# details true|false
rib¶
Enable/Disable rib logs.
vsr running config# routing logging base rib
enabled¶
If true, add logs about rib.
vsr running config# routing logging base rib
vsr running rib# enabled true|false
- Default value
true
details¶
If true, add detailed logs about rib.
vsr running config# routing logging base rib
vsr running rib# details true|false
route-map¶
Route map logging configuration.
vsr running config# routing logging route-map
enabled¶
If true, log route map events.
vsr running config# routing logging route-map
vsr running route-map# enabled true|false
- Default value
true
bgp¶
Note
requires a Product License.
Common BGP routers logging configuration.
vsr running config# routing logging bgp
enabled¶
Enable/disable BGP logging configuration.
vsr running config# routing logging bgp
vsr running bgp# enabled true|false
- Default value
true
allow-martians¶
Allow martian next hops.
vsr running config# routing logging bgp
vsr running bgp# allow-martians true|false
- Default value
false
as-4bytes¶
Log AS > 65535 actions.
vsr running config# routing logging bgp
vsr running bgp# as-4bytes true|false
- Default value
false
as-4bytes-segment¶
Log AS > 65535 aspath segment handling.
vsr running config# routing logging bgp
vsr running bgp# as-4bytes-segment true|false
- Default value
false
bestpath¶
Log BGP bestpath info.
vsr running config# routing logging bgp
vsr running bgp# bestpath BESTPATH
|
Description |
|---|---|
|
An IPv4 prefix: address and CIDR mask. |
|
An IPv6 prefix: address and CIDR mask. |
nexthop-tracking¶
Log BGP nexthop tracking.
vsr running config# routing logging bgp
vsr running bgp# nexthop-tracking true|false
- Default value
false
flowspec¶
Enable flowspec debugging entries.
vsr running config# routing logging bgp
vsr running bgp# flowspec true|false
- Default value
false
keepalives¶
Log keepalive messages to/from a specific neighbor or all.
vsr running config# routing logging bgp
vsr running bgp# keepalives KEEPALIVES
|
Description |
|---|---|
|
An IPv4 address. |
|
An IPv6 address. |
|
Log all keepalive messages. |
neighbor-events¶
Log neighbor event messages to/from a specific neighbor or all.
vsr running config# routing logging bgp
vsr running bgp# neighbor-events NEIGHBOR-EVENTS
|
Description |
|---|---|
|
An IPv4 address. |
|
An IPv6 address. |
|
Log all neighbor event messages. |
update-groups¶
Log update messages (only when BGP is configured as a server).
vsr running config# routing logging bgp
vsr running bgp# update-groups true|false
- Default value
false
zebra¶
Log zebra/BGP messages for a specific prefix or all.
vsr running config# routing logging bgp
vsr running bgp# zebra ZEBRA
|
Description |
|---|---|
|
An IPv4 prefix: address and CIDR mask. |
|
An IPv6 prefix: address and CIDR mask. |
|
Log all messages between Zebra and BGP. |
rpki¶
Enable RPKI logging.
vsr running config# routing logging bgp
vsr running bgp# rpki true|false
- Default value
false
pbr¶
Log policy base routing info.
vsr running config# routing logging bgp pbr
detail¶
Log policy base routing info with more details.
vsr running config# routing logging bgp pbr
vsr running pbr# detail true|false
- Default value
false
updates¶
Log inbound and outbound update messages.
vsr running config# routing logging bgp updates
enabled¶
Enable/Disable log about inbound and outbound update messages.
vsr running config# routing logging bgp updates
vsr running updates# enabled true|false
- Default value
true
in¶
Log inbound update messages from a specific neighbor or all.
vsr running config# routing logging bgp updates
vsr running updates# in IN
|
Description |
|---|---|
|
An IPv4 address. |
|
An IPv6 address. |
|
Log inbound update messages from all neighbors. |
- Default value
all
out¶
Log outbound update messages from a specific neighbor or all.
vsr running config# routing logging bgp updates
vsr running updates# out OUT
|
Description |
|---|---|
|
An IPv4 address. |
|
An IPv6 address. |
|
Log outbound update messages from all neighbors. |
- Default value
all
prefix¶
Log update messages to/from a specific network.
vsr running config# routing logging bgp updates
vsr running updates# prefix PREFIX
|
Description |
|---|---|
|
An IPv4 prefix: address and CIDR mask. |
|
An IPv6 prefix: address and CIDR mask. |
vpn¶
Log VPN routes.
vsr running config# routing logging bgp vpn
label¶
Log VPN label.
vsr running config# routing logging bgp vpn
vsr running vpn# label true|false
- Default value
false
leak-vrf¶
Log leaks.
vsr running config# routing logging bgp vpn
vsr running vpn# leak-vrf LEAK-VRF
|
Description |
|---|---|
|
Log leak to VRF from VPN. |
|
Log leak from VRF to VPN. |
|
Log all leaks. |
route-map-event¶
Log VPN route-map updates.
vsr running config# routing logging bgp vpn
vsr running vpn# route-map-event true|false
- Default value
false
rip¶
Note
requires a Product License.
Common RIP routers logging configuration.
vsr running config# routing logging rip
enabled¶
Enable/disable router logging configuration.
vsr running config# routing logging rip
vsr running rip# enabled true|false
- Default value
true
events¶
Log router events.
vsr running config# routing logging rip
vsr running rip# events true|false
- Default value
false
packet¶
Log router received/send packet info.
vsr running config# routing logging rip
vsr running rip# packet PACKET
|
Description |
|---|---|
|
Log only received packet info. |
|
Log only sent packet info. |
|
Log all packet info. |
- Default value
both
zebra¶
Log communication between the router and zebra.
vsr running config# routing logging rip
vsr running rip# zebra true|false
- Default value
false
ripng¶
Note
requires a Product License.
Common RIPng routers logging configuration.
vsr running config# routing logging ripng
enabled¶
Enable/disable router logging configuration.
vsr running config# routing logging ripng
vsr running ripng# enabled true|false
- Default value
true
events¶
Log router events.
vsr running config# routing logging ripng
vsr running ripng# events true|false
- Default value
false
packet¶
Log router received/send packet info.
vsr running config# routing logging ripng
vsr running ripng# packet PACKET
|
Description |
|---|---|
|
Log only received packet info. |
|
Log only sent packet info. |
|
Log all packet info. |
- Default value
both
zebra¶
Log communication between the router and zebra.
vsr running config# routing logging ripng
vsr running ripng# zebra true|false
- Default value
false
ospf¶
Note
requires a Product License.
Common OSPF routers logging configuration.
vsr running config# routing logging ospf
enabled¶
Enable/disable OSPF logging configuration.
vsr running config# routing logging ospf
vsr running ospf# enabled true|false
- Default value
true
events¶
Log OSPF event information.
vsr running config# routing logging ospf
vsr running ospf# events true|false
- Default value
false
ism¶
Log OSPF Interface State Machine information.
vsr running config# routing logging ospf
vsr running ospf# ism ISM
|
Description |
|---|---|
|
Log ISM Event Information. |
|
Log ISM Status Information. |
|
Log ISM Timer Information. |
|
Log all ISM Information. |
lsa¶
Log OSPF Link State Advertisement information.
vsr running config# routing logging ospf
vsr running ospf# lsa LSA
|
Description |
|---|---|
|
Log LSA flooding Information. |
|
Log LSA generate Information. |
|
Log LSA install Information. |
|
Log LSA refresh Information. |
|
Log all LSA Information. |
nsm¶
Log OSPF Neighbor State Machine information.
vsr running config# routing logging ospf
vsr running ospf# nsm NSM
|
Description |
|---|---|
|
Log NSM Event Information. |
|
Log NSM Status Information. |
|
Log NSM Timer Information. |
|
Log all NSM Information. |
nssa¶
Log OSPF nssa information.
vsr running config# routing logging ospf
vsr running ospf# nssa true|false
- Default value
false
zebra¶
Log zebra information.
vsr running config# routing logging ospf
vsr running ospf# zebra ZEBRA
|
Description |
|---|---|
|
Log zebra interface information. |
|
Log zebra redistribute information. |
|
Log zebra interface and redistribute information. |
message¶
Log OSPF message information.
vsr running config# routing logging ospf message <message>
|
Description |
|---|---|
|
Log Database Description messages. |
|
Log Hello messages. |
|
Log Link State Acknowledgment messages. |
|
Log Link State Request messages. |
|
Log Link State Update messages. |
|
Log all messages (whatever its type). |
direction¶
Direction of messages to log.
vsr running config# routing logging ospf message <message>
vsr running message <message># direction DIRECTION
|
Description |
|---|---|
|
Log sent messages. |
|
Log received messages. |
|
Log all messages. |
- Default value
both
detail¶
Log message details.
vsr running config# routing logging ospf message <message>
vsr running message <message># detail true|false
- Default value
false
ospf6¶
Note
requires a Product License.
Common OSPF6 routers logging configuration.
vsr running config# routing logging ospf6
enabled¶
Enable/Disable OSPF6 logging configuration.
vsr running config# routing logging ospf6
vsr running ospf6# enabled true|false
- Default value
true
abr¶
Log ABR information.
vsr running config# routing logging ospf6
vsr running ospf6# abr true|false
- Default value
false
asbr¶
Log ASBR information.
vsr running config# routing logging ospf6
vsr running ospf6# asbr true|false
- Default value
false
events¶
Log events.
vsr running config# routing logging ospf6
vsr running ospf6# events true|false
- Default value
false
flooding¶
Log flooding information.
vsr running config# routing logging ospf6
vsr running ospf6# flooding true|false
- Default value
false
interface¶
Log interface information.
vsr running config# routing logging ospf6
vsr running ospf6# interface true|false
- Default value
false
neighbor¶
Log neighbor information.
vsr running config# routing logging ospf6
vsr running ospf6# neighbor NEIGHBOR
|
Description |
|---|---|
|
Log neighbor event information. |
|
Log neighbor state information. |
|
Log all neighbor information. |
route¶
Log route information.
vsr running config# routing logging ospf6
vsr running ospf6# route ROUTE
|
Description |
|---|---|
|
Log inter area route calculation. |
|
Log intra area route calculation. |
|
Log route memory use.. |
|
Log route table calculation. |
|
Log all route information. |
spf¶
Log SPF calculation.
vsr running config# routing logging ospf6
vsr running ospf6# spf SPF
|
Description |
|---|---|
|
Log number of LSAs at SPF calculation time. |
|
Log detailed SPF process. |
|
Measure time taken by SPF calculation. |
|
Log all SPF messages. |
zebra¶
Log messages between OSPF router and zebra.
vsr running config# routing logging ospf6
vsr running ospf6# zebra ZEBRA
|
Description |
|---|---|
|
Log messages sent to zebra. |
|
Log messages received from zebra. |
|
Log messages to/from zebra. |
border-routers¶
Log border routers information.
vsr running config# routing logging ospf6 border-routers
summary¶
Log border router information in a specific area.
vsr running config# routing logging ospf6 border-routers
vsr running border-routers# summary true|false
- Default value
false
area-id¶
Log border router information in a specific area.
vsr running config# routing logging ospf6 border-routers
vsr running border-routers# area-id AREA-ID
|
An IPv4 address. |
router-id¶
Log information from a specific border router.
vsr running config# routing logging ospf6 border-routers
vsr running border-routers# router-id ROUTER-ID
|
An IPv4 address. |
lsa¶
Configure Link State Advertisements logging information.
vsr running config# routing logging ospf6
vsr running ospf6# lsa <lsa> level LEVEL
|
Description |
|---|---|
|
Log as-external LSAs. |
|
Log inter area prefix LSAs. |
|
LOG inter router LSAs. |
|
LOG intra area prefix LSAs. |
|
LOG link LSAs. |
|
LOG network LSAs. |
|
LOG router LSAs. |
|
LOG all LSA information. |
level¶
LSA log level.
level LEVEL
|
Description |
|---|---|
|
Dump LSAs. |
|
Log LSA’s internal information. |
|
Log details of LSAs. |
|
Log all information about LSAs. |
- Default value
all
message¶
Log OSPF message information.
vsr running config# routing logging ospf6
vsr running ospf6# message <message> direction DIRECTION
|
Description |
|---|---|
|
Log Database Description messages. |
|
Log Hello messages. |
|
Log Link State Acknowledgment messages. |
|
Log Link State Request messages. |
|
Log Link State Update messages. |
|
Log all messages. |
direction¶
Direction of messages to log.
direction DIRECTION
|
Description |
|---|---|
|
Log sent messages. |
|
Log received messages. |
|
Log all messages. |
- Default value
both
isis¶
Note
requires a Product License.
Common IS-IS routers logging configuration.
vsr running config# routing logging isis
enabled¶
Set enabled/disabled IS-IS logging configuration.
vsr running config# routing logging isis
vsr running isis# enabled true|false
- Default value
true
adj-packets¶
Set log IS-IS adj-packets information.
vsr running config# routing logging isis
vsr running isis# adj-packets true|false
- Default value
false
bfd¶
Set log IS-IS bfd information.
vsr running config# routing logging isis
vsr running isis# bfd true|false
- Default value
false
events¶
Set log IS-IS events information.
vsr running config# routing logging isis
vsr running isis# events true|false
- Default value
false
flooding¶
Set log IS-IS flooding information.
vsr running config# routing logging isis
vsr running isis# flooding true|false
- Default value
false
ldp-sync¶
Set log IS-IS ldp-sync information.
vsr running config# routing logging isis
vsr running isis# ldp-sync true|false
- Default value
false
lfa¶
Set log IS-IS lfa information.
vsr running config# routing logging isis
vsr running isis# lfa true|false
- Default value
false
lsp-gen¶
Set log IS-IS lsp-gen information.
vsr running config# routing logging isis
vsr running isis# lsp-gen true|false
- Default value
false
lsp-sched¶
Set log IS-IS lsp-sched information.
vsr running config# routing logging isis
vsr running isis# lsp-sched true|false
- Default value
false
packet-dump¶
Set log IS-IS packet-dump information.
vsr running config# routing logging isis
vsr running isis# packet-dump true|false
- Default value
false
route-events¶
Set log IS-IS route-events information.
vsr running config# routing logging isis
vsr running isis# route-events true|false
- Default value
false
snp-packets¶
Set log IS-IS snp-packets information.
vsr running config# routing logging isis
vsr running isis# snp-packets true|false
- Default value
false
spf-events¶
Set log IS-IS spf-events information.
vsr running config# routing logging isis
vsr running isis# spf-events true|false
- Default value
false
sr-events¶
Set log IS-IS sr-events information.
vsr running config# routing logging isis
vsr running isis# sr-events true|false
- Default value
false
tx-queue¶
Set log IS-IS tx-queue information.
vsr running config# routing logging isis
vsr running isis# tx-queue true|false
- Default value
false
update-packets¶
Set log IS-IS update-packets information.
vsr running config# routing logging isis
vsr running isis# update-packets true|false
- Default value
false
traffic-engineering¶
Traffic engineering configuration node.
vsr running config# routing traffic-engineering
affinity-map¶
Map an affinity name to an admin-group bit-position.
vsr running config# routing traffic-engineering affinity-map <string>
|
The name of the affinity-map. |
bit-position (mandatory)¶
The bit position to set in the admin-group.
vsr running config# routing traffic-engineering affinity-map <string>
vsr running affinity-map <string># bit-position <0-255>
ipv4-prefix-list¶
IPv4 prefix list.
vsr running config# routing ipv4-prefix-list <string>{1,max}
|
Prefix list name. |
seq¶
Prefix list sequence.
vsr running config# routing ipv4-prefix-list <string>{1,max}
vsr running ipv4-prefix-list <string>{1,max}# seq <1-4294967295> address ADDRESS \
... policy POLICY ge <0-128> le <0-128>
|
Sequence number. |
address¶
Prefix to match (any if not set).
address ADDRESS
|
An IPv4 prefix: address and CIDR mask. |
policy (mandatory)¶
Prefix list policy.
policy POLICY
|
Description |
|---|---|
|
Specify packets to reject. |
|
Specify packets to forward. |
ipv6-prefix-list¶
IPv6 prefix list.
vsr running config# routing ipv6-prefix-list <string>{1,max}
|
Prefix list name. |
seq¶
Prefix list sequence.
vsr running config# routing ipv6-prefix-list <string>{1,max}
vsr running ipv6-prefix-list <string>{1,max}# seq <1-4294967295> address ADDRESS \
... policy POLICY ge <0-128> le <0-128>
|
Sequence number. |
address¶
Prefix to match (any if not set).
address ADDRESS
|
An IPv6 prefix: address and CIDR mask. |
policy (mandatory)¶
Prefix list policy.
policy POLICY
|
Description |
|---|---|
|
Specify packets to reject. |
|
Specify packets to forward. |
route-map¶
Route map list.
vsr running config# routing route-map <string>{1,max}
|
Route map name. |
seq¶
Route map sequence.
vsr running config# routing route-map <string>{1,max} seq <1-65535>
|
Sequence number. |
policy (mandatory)¶
Matching policy.
vsr running config# routing route-map <string>{1,max} seq <1-65535>
vsr running seq <1-65535># policy POLICY
|
Description |
|---|---|
|
Route map denies set operations. |
|
Route map permits set operations. |
description¶
Route-map description.
vsr running config# routing route-map <string>{1,max} seq <1-65535>
vsr running seq <1-65535># description <string>
call¶
Jump to another Route-Map after match+set.
vsr running config# routing route-map <string>{1,max} seq <1-65535>
vsr running seq <1-65535># call <string>{1,max}
on-match¶
Exit policy on matches.
vsr running config# routing route-map <string>{1,max} seq <1-65535>
vsr running seq <1-65535># on-match ON-MATCH
|
Description |
|---|---|
|
No description. |
|
Next clause. |
match¶
Match values from routing table.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
as-path¶
Match BGP AS path list name. The list should be already created through routing:bgp:as-path-access-list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# as-path <string>{1,max}
interface¶
Match first hop interface of route.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# interface INTERFACE
|
An interface name. |
local-preference¶
Match local-preference metric value.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# local-preference <uint32>
mac-address¶
Match MAC Access-list name.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# mac-address <string>{1,max}
metric¶
Match metric value.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# metric <uint32>
origin¶
BGP origin code.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# origin ORIGIN
|
Description |
|---|---|
|
Remote EGP. |
|
Local IGP. |
|
Unknown heritage. |
peer¶
Match peer address.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# peer PEER
|
Description |
|---|---|
|
Static or redistributed routes. |
|
An IPv4 address. |
|
An IPv6 address. |
|
An interface name. |
probability¶
Match portion of routes defined by percentage value.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# probability <0-100>
source-instance¶
Match the protocol’s instance number.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# source-instance <uint8>
source-protocol¶
Match protocol via which the route was learnt.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# source-protocol SOURCE-PROTOCOL
|
Description |
|---|---|
|
BABEL protocol. |
|
BGP protocol. |
|
Routes from directly connected peer. |
|
EIGRP protocol. |
|
ISIS protocol. |
|
Routes from kernel. |
|
NHRP protocol. |
|
OSPF protocol. |
|
OSPF6 protocol. |
|
PIM protocol. |
|
RIP protocol. |
|
RIPNG protocol. |
|
SHARP process. |
|
Statically configured routes. |
|
Routes from system configuration. |
tag¶
Match tag of route.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# tag <uint32>
extcommunity¶
Match BGP/VPN extended community list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# extcommunity <leafref>
rpki¶
RPKI specific settings.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# rpki RPKI
|
Description |
|---|---|
|
Valid prefix. |
|
Invalid prefix. |
|
Prerfix not found. |
evpn¶
Ethernet Virtual Private Network.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match evpn
default-route¶
If true, mark as default EVPN type-5 route.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match evpn
vsr running evpn# default-route true|false
route-type¶
Match route type.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match evpn
vsr running evpn# route-type ROUTE-TYPE
|
Description |
|---|---|
|
Mac-ip route. |
|
IMET route. |
|
Prefix route. |
vni¶
VNI ID.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match evpn
vsr running evpn# vni <1-16777215>
route-distinguisher¶
Route distinguisher.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match evpn
vsr running evpn# route-distinguisher ROUTE-DISTINGUISHER
|
Description |
|---|---|
|
Type definition for extended community attributes. Possible formats: <4b AS>:<2b value>, <2b AS>:<4b value> or <4b IPv4>:<2b value> (see RFC4364 section 4.2). <2b AS> or <4b AS> can be expressed in plain, dot and dot+ format. |
|
Type definition for extended community attributes. Possible formats: <4b AS>:<2b value>, <2b AS>:<4b value> or <4b IPv4>:<2b value> (see RFC4364 section 4.2). <2b AS> or <4b AS> can be expressed in plain, dot and dot+ format. |
|
Type definition for extended community attributes. Possible formats: <4b AS>:<2b value>, <2b AS>:<4b value> or <4b IPv4>:<2b value> (see RFC4364 section 4.2). <2b AS> or <4b AS> can be expressed in plain, dot and dot+ format. |
|
Type definition for extended community attributes. Possible formats: <4b AS>:<2b value>, <2b AS>:<4b value> or <4b IPv4>:<2b value> (see RFC4364 section 4.2). <2b AS> or <4b AS> can be expressed in plain, dot and dot+ format. |
|
Type definition for extended community attributes. Possible formats: <4b AS>:<2b value>, <2b AS>:<4b value> or <4b IPv4>:<2b value> (see RFC4364 section 4.2). <2b AS> or <4b AS> can be expressed in plain, dot and dot+ format. |
ip¶
IP information.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip
address¶
Match address of route.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip address
Matches the specified access list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip address
vsr running address# access-list ACCESS-LIST
|
Description |
|---|---|
|
No description. |
|
No description. |
Matches the specified prefix list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip address
vsr running address# prefix-list <string>{1,max}
Matches the specified prefix length.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip address
vsr running address# prefix-len <0-32>
next-hop¶
Match next-hop address of route.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip next-hop
Matches the specified access list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip next-hop
vsr running next-hop# access-list ACCESS-LIST
|
Description |
|---|---|
|
No description. |
|
No description. |
Matches the specified prefix list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip next-hop
vsr running next-hop# prefix-list <string>{1,max}
Matches the specified prefix length.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip next-hop
vsr running next-hop# prefix-len <0-32>
route-source¶
Match advertising source address of route.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip route-source
Matches the specified access list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip route-source
vsr running route-source# access-list ACCESS-LIST
|
Description |
|---|---|
|
No description. |
|
No description. |
Matches the specified prefix list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ip route-source
vsr running route-source# prefix-list <string>{1,max}
ipv6¶
IPv6 information.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ipv6
address¶
Match IPv6 address of route.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ipv6 address
Matches the specified access list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ipv6 address
vsr running address# access-list <string>{1,max}
Matches the specified prefix list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ipv6 address
vsr running address# prefix-list <string>{1,max}
Matches the specified prefix length.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ipv6 address
vsr running address# prefix-len <0-128>
next-hop¶
Match IPv6 next-hop address of route.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ipv6 next-hop
IPv6 address of next hop.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match ipv6 next-hop
vsr running next-hop# address ADDRESS
|
An IPv6 address. |
community¶
Match BGP community list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# community id <leafref> exact-match true|false
large-community¶
Match BGP large community list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> match
vsr running match# large-community id <leafref> exact-match true|false
set¶
Set values in destination routing protocol.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
table¶
Export route to non-main table.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# table <1-4294967295>
atomic-aggregate¶
Enable or disable BGP atomic aggregate attribute.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# atomic-aggregate true|false
label-index¶
Label index value.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# label-index <0-1048560>
local-preference¶
BGP local preference path attribute.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# local-preference <uint32>
metric¶
Metric value for destination routing protocol. Use +<metric> or -<metric> to increase or decrease the metric.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# metric METRIC
|
Description |
|---|---|
|
No description. |
|
No description. |
|
Add metric (deprecated). |
|
Add round trip time. |
|
Subtract metric (deprecated). |
|
Subtract round trip time. |
|
Assign round trip time. |
metric-type¶
Type of metric.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# metric-type METRIC-TYPE
|
Description |
|---|---|
|
OSPF6 external type 1 metric. |
|
OSPF6 external type 2 metric. |
origin¶
BGP origin code.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# origin ORIGIN
|
Description |
|---|---|
|
Remote EGP. |
|
Local IGP. |
|
Unknown heritage. |
originator-id¶
BGP originator ID attribute.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# originator-id ORIGINATOR-ID
|
An IPv4 address. |
src¶
Src address for route.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# src SRC
|
Description |
|---|---|
|
An IPv4 address. |
|
An IPv6 address. |
tag¶
Tag value for routing protocol.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# tag <1-4294967295>
weight¶
BGP weight for routing table.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# weight <uint32>
comm-list-delete¶
Set BGP community list (for deletion).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# comm-list-delete <leafref>
extcomm-list-delete¶
Set BGP extended community list (for deletion).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# extcomm-list-delete <leafref>
large-comm-list-delete¶
Set BGP large community list (for deletion).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# large-comm-list-delete LARGE-COMM-LIST-DELETE
|
Description |
|---|---|
|
No description. |
|
No description. |
aggregator¶
BGP aggregator attribute.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set
vsr running set# aggregator as AS address ADDRESS
as (mandatory)¶
AS number of BGP aggregator.
as AS
|
Description |
|---|---|
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
as-path¶
Transform BGP AS-path attribute.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path
exclude (deprecated)¶
Attention
ignore asnAS numbers to exclude from the as-path.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path
vsr running as-path# exclude EXCLUDE
|
Description |
|---|---|
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
ignore¶
AS numbers to exclude from the as-path.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path ignore
Exclude all AS numbers from the as-path.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path ignore
vsr running ignore# all
AS numbers to exclude from the as-path.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path ignore asn <asn>
|
Description |
|---|---|
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
Ignore access list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path ignore access-list <string>
|
Access list to exclude from the as-path. |
prepend¶
Prepend to the as-path.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path prepend
Use the peer’s AS-number; number of times to insert.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path prepend
vsr running prepend# last-as <1-10>
AS number to prepend to the as-path list.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path prepend asn <uint8>
|
Order of the AS number. |
AS number.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path prepend asn <uint8>
vsr running asn <uint8># VALUE
|
Description |
|---|---|
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
replace¶
AS numbers to replace from the as-path.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path replace
Replace AS number by another AS number.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path replace asn <asn>
|
Description |
|---|---|
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
AS number to use as replacement.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path replace asn <asn>
vsr running asn <asn># by BY
|
Description |
|---|---|
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
Replace access list by another AS number.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path replace access-list <string>
|
Access list of the as-path to replace. |
AS number to use as replacement.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path replace access-list <string>
vsr running access-list <string># by BY
|
Description |
|---|---|
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
Replace any AS number.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path replace any
AS number to use as replacement.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set as-path replace any
vsr running any# by BY
|
Description |
|---|---|
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
|
A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs). |
ip¶
IP information.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set ip
next-hop¶
Next hop address.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set ip
vsr running ip# next-hop NEXT-HOP
|
Description |
|---|---|
|
An IPv4 address. |
|
Use peer address (for BGP only). |
|
Don’t modify existing Next hop address. |
ipv4¶
IPv4 information.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set ipv4
ipv6¶
IPv6 information.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set ipv6
next-hop¶
IPv6 next hop address.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set ipv6 next-hop
IPv6 global address.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set ipv6 next-hop
vsr running next-hop# global GLOBAL
|
An IPv6 address. |
IPv6 local address.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set ipv6 next-hop
vsr running next-hop# local LOCAL
|
An IPv6 link-local address which is in the range of fe80::/10. |
If true, use peer address (for BGP only).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set ipv6 next-hop
vsr running next-hop# peer-address true|false
If true, prefer global over link-local if both exist.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set ipv6 next-hop
vsr running next-hop# prefer-global true|false
l3vpn¶
IP information.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set l3vpn
next-hop¶
VPN information.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set l3vpn next-hop
Accept L3VPN traffic over other than LSP encapsulation.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set l3vpn next-hop
vsr running next-hop# encapsulation ENCAPSULATION
|
Accept L3VPN traffic over GRE. |
community¶
BGP community attribute.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set community
none¶
Set community to none.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set community
vsr running community# none
attribute (state only)¶
BGP community attribute.
vsr> show state routing route-map <string>{1,max} seq <1-65535> set community attribute
replace-by¶
BGP community attribute(s) that will replace existing one(s).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set community replace-by
BGP community attribute(s).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set community replace-by
vsr running replace-by# ATTRIBUTE
|
Description |
|---|---|
|
Local AS. |
|
Do not advertise. |
|
Do not export. |
|
Internet. |
|
Graceful-shutdown. |
|
Accept-own. |
|
Route-filter-translated-v4. |
|
Route-filter-v4. |
|
Route-filter-translated-v6. |
|
Route-filter-v6. |
|
Llgr-stale. |
|
No-llgr. |
|
Accept-own-nexthop. |
|
Blackhole. |
|
No-peer. |
|
Community attribute. |
add¶
BGP community attribute(s) that will be added to existing one(s).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set community add
BGP community attribute(s).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set community add
vsr running add# ATTRIBUTE
|
Description |
|---|---|
|
Local AS. |
|
Do not advertise. |
|
Do not export. |
|
Internet. |
|
Graceful-shutdown. |
|
Accept-own. |
|
Route-filter-translated-v4. |
|
Route-filter-v4. |
|
Route-filter-translated-v6. |
|
Route-filter-v6. |
|
Llgr-stale. |
|
No-llgr. |
|
Accept-own-nexthop. |
|
Blackhole. |
|
No-peer. |
|
Community attribute. |
large-community¶
BGP large community attribute.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set large-community
none¶
Set large community to none.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set large-community
vsr running large-community# none
attribute (state only)¶
BGP large-community attribute.
vsr> show state routing route-map <string>{1,max} seq <1-65535> set large-community attribute
replace-by¶
BGP large community attribute(s) that will replace existing one(s).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set large-community replace-by
BGP large community attribute(s).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set large-community replace-by
vsr running replace-by# ATTRIBUTE
|
Large community attribute. |
add¶
BGP large community attribute(s) that will be added to existing one(s).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set large-community add
BGP large community attribute(s).
vsr running config# routing route-map <string>{1,max} seq <1-65535> set large-community add
vsr running add# ATTRIBUTE
|
Large community attribute. |
extcommunity¶
BGP extended community attribute.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set extcommunity
rt¶
Route Target extended community.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set extcommunity
vsr running extcommunity# rt RT
|
Description |
|---|---|
|
Extended communities or route-target attribute. |
|
Extended communities or route-target attribute. |
|
Extended communities or route-target attribute. |
soo¶
Site-of-Origin extended community.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set extcommunity
vsr running extcommunity# soo SOO
|
Description |
|---|---|
|
Extended communities or route-target attribute. |
|
Extended communities or route-target attribute. |
|
Extended communities or route-target attribute. |
color¶
Color attribute. Apply a segment routing policy to the BGP updates received with this color.
vsr running config# routing route-map <string>{1,max} seq <1-65535> set extcommunity
vsr running extcommunity# color <1-4294967295>
bgp¶
Note
requires a Product License.
Common BGP routers configuration.
vsr running config# routing bgp
route-map-delay¶
Time in secs to wait before processing route-map changes.
vsr running config# routing bgp
vsr running bgp# route-map-delay <0-600>
- Default value
5
community-list¶
Add a community list entry.
vsr running config# routing bgp community-list <community-list>
|
Description |
|---|---|
|
List name. |
|
List name. |
policy¶
Specify communities to reject or accept.
vsr running config# routing bgp community-list <community-list>
vsr running community-list <community-list># policy <uint16> POLICY COMMUNITY
|
Priority of the policy. Lesser is the value, greater is the priority. |
POLICY (mandatory)¶
Policy to apply to the specified communities.
POLICY
|
Description |
|---|---|
|
Specified communities will be rejected. |
|
Specified communities will be accepted. |
COMMUNITY¶
Communities on which the policy should be applied.
COMMUNITY
|
Description |
|---|---|
|
Local AS. |
|
Do not advertise. |
|
Do not export. |
|
Internet. |
|
Graceful-shutdown. |
|
Accept-own. |
|
Route-filter-translated-v4. |
|
Route-filter-v4. |
|
Route-filter-translated-v6. |
|
Route-filter-v6. |
|
Llgr-stale. |
|
No-llgr. |
|
Accept-own-nexthop. |
|
Blackhole. |
|
No-peer. |
|
Community attribute. |
community-list-expanded¶
Add an expanded community list entry.
vsr running config# routing bgp community-list-expanded <community-list-expanded>
|
Description |
|---|---|
|
List name. |
|
List name. |
policy¶
Specify communities to reject or accept.
vsr running config# routing bgp community-list-expanded <community-list-expanded>
vsr running community-list-expanded <community-list-expanded># policy <uint16> \
... POLICY COMMUNITY
|
Priority of the policy. Lesser is the value, greater is the priority. |
POLICY (mandatory)¶
Policy to apply to the specified communities.
POLICY
|
Description |
|---|---|
|
Specified communities will be rejected. |
|
Specified communities will be accepted. |
COMMUNITY¶
Communities on which the policy should be applied.
COMMUNITY
|
Description |
|---|---|
|
Local AS. |
|
Do not advertise. |
|
Do not export. |
|
Internet. |
|
Graceful-shutdown. |
|
Accept-own. |
|
Route-filter-translated-v4. |
|
Route-filter-v4. |
|
Route-filter-translated-v6. |
|
Route-filter-v6. |
|
Llgr-stale. |
|
No-llgr. |
|
Accept-own-nexthop. |
|
Blackhole. |
|
No-peer. |
|
Community attribute. |
extcommunity-list¶
Add an extended community list entry.
vsr running config# routing bgp extcommunity-list <extcommunity-list>
|
Description |
|---|---|
|
List name. |
|
List name. |
policy¶
Specify extended communities to reject or accept.
vsr running config# routing bgp extcommunity-list <extcommunity-list>
vsr running extcommunity-list <extcommunity-list># policy <uint16> POLICY \
... rt RT soo SOO
|
Priority of the policy. Lesser is the value, greater is the priority. |
POLICY (mandatory)¶
Policy to apply to the specified extcommunities.
POLICY
|
Description |
|---|---|
|
Specified extcommunities will be reject. |
|
Specified extcommunities will be accept. |
rt¶
Extended community route target to reject.
rt RT
|
Description |
|---|---|
|
Extended communities or route-target attribute. |
|
Extended communities or route-target attribute. |
|
Extended communities or route-target attribute. |
soo¶
Extended community site of origin to reject.
soo SOO
|
Description |
|---|---|
|
Extended communities or route-target attribute. |
|
Extended communities or route-target attribute. |
|
Extended communities or route-target attribute. |
extcommunity-list-expanded¶
Add an expanded extended community list entry.
vsr running config# routing bgp extcommunity-list-expanded <extcommunity-list-expanded>
|
Description |
|---|---|
|
List name. |
|
List name. |
policy¶
Specify extended communities to reject or accept.
vsr running config# routing bgp extcommunity-list-expanded <extcommunity-list-expanded>
vsr running extcommunity-list-expanded <extcommunity-list-expanded># policy <uint16> \
... POLICY <string>
|
Priority of the policy. Lesser is the value, greater is the priority. |
POLICY (mandatory)¶
Policy to apply to the specified extcommunities.
POLICY
|
Description |
|---|---|
|
Specified extcommunities will be reject. |
|
Specified extcommunities will be accept. |
large-community-list¶
Add a large community list entry.
vsr running config# routing bgp large-community-list <large-community-list>
|
Description |
|---|---|
|
List name. |
|
List name. |
policy¶
Specify large communities to reject or accept.
vsr running config# routing bgp large-community-list <large-community-list>
vsr running large-community-list <large-community-list># policy <uint16> \
... POLICY LARGE-COMMUNITY
|
Priority of the policy. Lesser is the value, greater is the priority. |
POLICY (mandatory)¶
Policy to apply to the specified large communities.
POLICY
|
Description |
|---|---|
|
Specified large communities will be rejected. |
|
Specified large communities will be accepted. |
LARGE-COMMUNITY¶
Large communities on which the policy should be applied.
LARGE-COMMUNITY
|
Large community attribute. |
large-community-list-expanded¶
Add an expanded large community list entry.
vsr running config# routing bgp large-community-list-expanded <large-community-list-expanded>
|
Description |
|---|---|
|
List name. |
|
List name. |
policy¶
Specify large communities to reject or accept.
vsr running config# routing bgp large-community-list-expanded <large-community-list-expanded>
vsr running large-community-list-expanded <large-community-list-expanded># policy <uint16> \
... POLICY <string>
|
Priority of the policy. Lesser is the value, greater is the priority. |
POLICY (mandatory)¶
Policy to apply to the specified large communities.
POLICY
|
Description |
|---|---|
|
Specified large communities will be rejected. |
|
Specified large communities will be accepted. |
as-path-access-list¶
BGP autonomous system path filter.
vsr running config# routing bgp as-path-access-list <string>
|
Access list name. |
policy¶
Specify AS path access list to reject or accept.
vsr running config# routing bgp as-path-access-list <string>
vsr running as-path-access-list <string># policy <uint16> POLICY <string>
|
Priority of the policy. Lesser is the value, greater is the priority. |
POLICY (mandatory)¶
Policy to apply to the specified regular expression that match AS paths.
POLICY
|
Description |
|---|---|
|
Specified access list will be rejected. |
|
Specified access list will be accepted. |
<string>¶
Regular expression to match the BGP AS paths on which the policy should be applied.
<string>
snmp¶
SNMP configuration for BGP.
vsr running config# routing bgp snmp
trap¶
Select the BGP SNMP mib to send neigbhors state transition events.
vsr running config# routing bgp snmp
vsr running snmp# trap TRAP
|
Description |
|---|---|
|
Send only SNMP traps for IPv4 neigbhors BackwardTransition and BgpEstablished as defined in RFC4273. |
|
Send the SNMP traps for IPv4/IPv6 neigbhors BackwardTransition and peer BgpEstablished events as defined in Draft-IETF-idr-bgp4-mibv2-11. |
queue-limit¶
Change the maximum number of BGP messages that can be stored in the input and outgoing queue size for each peer.
vsr running config# routing bgp queue-limit
input¶
Maximum number of messages that can be stored for each peer on the input queue.
vsr running config# routing bgp queue-limit
vsr running queue-limit# input <1-4294967295>
output¶
Maximum number of messages that can be stored for each peer on the output queue.
vsr running config# routing bgp queue-limit
vsr running queue-limit# output <1-4294967295>