bgp

BGP router configuration.

vrouter running config# vrf <vrf> routing bgp

enabled

Enable or disable BGP router.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# enabled true|false

Default value

true

as (mandatory)

BGP AS number.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# as AS

AS

A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

always-compare-med

If true, allow comparing MED from different neighbors.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# always-compare-med true|false

Default value

false

cluster-id

Configure Route-Reflector Cluster-id.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# cluster-id CLUSTER-ID

CLUSTER-ID values	Description
<A.B.C.D>	An IPv4 address.
<uint32>	No description.

coalesce-time

Subgroup coalesce timer (in ms).

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# coalesce-time <uint32>

deterministic-med

If true, Pick the best-MED path among paths advertised from the neighboring AS.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# deterministic-med true|false

Default value

false

ebgp-connected-route-check

Enable or disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# ebgp-connected-route-check true|false

Default value

true

fast-external-failover

If true, immediately reset session if a link to a directly connected external peer goes down.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# fast-external-failover true|false

Default value

true

graceful-shutdown

Enable or disable graceful shutdown.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# graceful-shutdown true|false

Default value

false

log-neighbor-changes

If true, log neighbor up/down and reset reason.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# log-neighbor-changes true|false

Default value

false

network-import-check

If true, check BGP network route exists in IGP.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# network-import-check true|false

Default value

false

route-reflector-allow-outbound-policy

If true, allow modifications made by out route-map on IBGP neighbors.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# route-reflector-allow-outbound-policy true|false

Default value

false

router-id

Router id of the router.

vrouter running config# vrf <vrf> routing bgp
vrouter running bgp# router-id ROUTER-ID

ROUTER-ID

An IPv4 address.

neighbor-total-count (state only)

Total number of neighbors.

vrouter> show state vrf <vrf> routing bgp neighbor-total-count

bestpath

Change the default bestpath selection.

vrouter running config# vrf <vrf> routing bgp bestpath

compare-routerid

If true, compare router-id for identical EBGP paths.

vrouter running config# vrf <vrf> routing bgp bestpath
vrouter running bestpath# compare-routerid true|false

Default value

false

med

MED attribute.

vrouter running config# vrf <vrf> routing bgp bestpath
vrouter running bestpath# med MED

MED values	Description
confederation	Compare MED among confederation paths.
missing-as-worst	Treat missing MED as the least preferred one.

as-path

AS-path attribute.

vrouter running config# vrf <vrf> routing bgp bestpath as-path

confederation

If true, compare path lengths including confederation sets and sequences in selecting a route.

vrouter running config# vrf <vrf> routing bgp bestpath as-path
vrouter running as-path# confederation true|false

Default value

false

ignore

If true, ignore as-path length in selecting a route.

vrouter running config# vrf <vrf> routing bgp bestpath as-path
vrouter running as-path# ignore true|false

Default value

false

multipath-relax

Allow load sharing across routes that have different AS paths (but same length).

vrouter running config# vrf <vrf> routing bgp bestpath as-path
vrouter running as-path# multipath-relax MULTIPATH-RELAX

MULTIPATH-RELAX values	Description
as-set	Generate an AS_SET.
no-as-set	Do not generate an AS_SET.

client-to-client

BGP client to client route reflection.

vrouter running config# vrf <vrf> routing bgp client-to-client

reflection

Enable or disable BGP client to client route reflection.

vrouter running config# vrf <vrf> routing bgp client-to-client
vrouter running client-to-client# reflection true|false

Default value

true

confederation

Parameters indicating whether the local system acts as part of a BGP confederation.

vrouter running config# vrf <vrf> routing bgp confederation

identifier

Confederation AS number. Setting the AS indicates that the local-AS is part of a BGP confederation.

vrouter running config# vrf <vrf> routing bgp confederation
vrouter running confederation# identifier <uint32>

peers

Peer AS that are to be treated as part of the local confederation.

vrouter running config# vrf <vrf> routing bgp confederation
vrouter running confederation# peers <uint32>

dampening

Enable route-flap dampening.

vrouter running config# vrf <vrf> routing bgp dampening

half-life

Half-life time for the penalty (minutes).

vrouter running config# vrf <vrf> routing bgp dampening
vrouter running dampening# half-life <uint8>

Default value

15

reuse

Value to start reusing a route.

vrouter running config# vrf <vrf> routing bgp dampening
vrouter running dampening# reuse <uint16>

Default value

750

suppress

Value to start suppressing a route.

vrouter running config# vrf <vrf> routing bgp dampening
vrouter running dampening# suppress <uint16>

Default value

2000

max-suppress-time

Maximum duration to suppress a stable route (minutes).

vrouter running config# vrf <vrf> routing bgp dampening
vrouter running dampening# max-suppress-time <uint8>

Default value

60

graceful-restart

Configure graceful restart capability parameters.

vrouter running config# vrf <vrf> routing bgp graceful-restart

preserve-fw-state

If true, sets F-bit indication that fib is preserved while doing Graceful Restart.

vrouter running config# vrf <vrf> routing bgp graceful-restart
vrouter running graceful-restart# preserve-fw-state true|false

Default value

false

restart-time

Set the time to wait to delete stale routes before a BGP open message is received.

vrouter running config# vrf <vrf> routing bgp graceful-restart
vrouter running graceful-restart# restart-time <uint16>

Default value

120

stalepath-time

Set the max time to hold onto restarting peer’s stale paths.

vrouter running config# vrf <vrf> routing bgp graceful-restart
vrouter running graceful-restart# stalepath-time <uint16>

Default value

360

listen

Configure BGP listen options.

vrouter running config# vrf <vrf> routing bgp listen

limit

Maximum number of BGP Dynamic neighbors that can be created.

vrouter running config# vrf <vrf> routing bgp listen
vrouter running listen# limit <uint16>

Default value

100

neighbor-range

Configure BGP dynamic neighbors listen range.

vrouter running config# vrf <vrf> routing bgp listen
vrouter running listen# neighbor-range <neighbor-range> neighbor-group <neighbor-group>

<neighbor-range> values	Description
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

neighbor-group (mandatory)

Neighbor group name.

neighbor-group <neighbor-group>

max-med

Advertise routes with max-med.

vrouter running config# vrf <vrf> routing bgp max-med

administrative

Administratively applied, for an indefinite period.

vrouter running config# vrf <vrf> routing bgp max-med
vrouter running max-med# administrative <uint32>

on-startup

Effective on a startup.

vrouter running config# vrf <vrf> routing bgp max-med on-startup

period (mandatory)

Time (seconds) period for max-med.

vrouter running config# vrf <vrf> routing bgp max-med on-startup
vrouter running on-startup# period <uint32>

max-med

Max MED value to be used.

vrouter running config# vrf <vrf> routing bgp max-med on-startup
vrouter running on-startup# max-med <uint32>

Default value

4294967295

packet-rw-quantum

Number of packets to read/write from peer socket per I/O cycle.

vrouter running config# vrf <vrf> routing bgp packet-rw-quantum

read

Number of packets to read from peer socket per I/O cycle.

vrouter running config# vrf <vrf> routing bgp packet-rw-quantum
vrouter running packet-rw-quantum# read <uint8>

Default value

10

write

Number of packets to write from peer socket per I/O cycle.

vrouter running config# vrf <vrf> routing bgp packet-rw-quantum
vrouter running packet-rw-quantum# write <uint8>

Default value

10

update-delay

Force initial delay for best-path and updates.

vrouter running config# vrf <vrf> routing bgp update-delay

delay

Force initial delay for best-path and updates.

vrouter running config# vrf <vrf> routing bgp update-delay
vrouter running update-delay# delay <uint16>

Default value

0

established-wait

Wait for peers to be established.

vrouter running config# vrf <vrf> routing bgp update-delay
vrouter running update-delay# established-wait <uint16>

address-family

Address-families associated with the BGP configuration.

vrouter running config# vrf <vrf> routing bgp address-family

ipv4-unicast

Configure IPv4 unicast address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast

table-map

BGP table to RIB route download filter.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast
vrouter running ipv4-unicast# table-map TABLE-MAP

TABLE-MAP

Route map name.

enabled

Enable or disable IPv4 unicast addres family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast
vrouter running ipv4-unicast# enabled true|false

Default value

true

dampening

Enable/Disable route-flap dampening in this address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast
vrouter running ipv4-unicast# dampening true|false

Default value

false

rib-count (state only)

Routing information base table count.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast rib-count

neighbor-count (state only)

Number of neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast neighbor-count

dynamic-neighbor-count (state only)

Number of dynamic neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast dynamic-neighbor-count

network

Specify networks to announce via BGP.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast network <network>

<network>

An IPv4 prefix: address and CIDR mask.

route-map

Route-map name.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast network <network>
vrouter running network <network># route-map ROUTE-MAP

ROUTE-MAP

Route map name.

backdoor

If true, specify a BGP backdoor route.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast network <network>
vrouter running network <network># backdoor true|false

Default value

false

label-index

Label index to associate with the prefix.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast network <network>
vrouter running network <network># label-index <uint32>

route (state only)

Route operational state.

validity (state only)

Route validity.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast network <network> route <string> validity

route-type (state only)

Internal or external route.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast network <network> route <string> route-type

prefix (state only)

Route prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast network <network> route <string> prefix

prefix-length (state only)

Route prefix length.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast network <network> route <string> prefix-length

med (state only)

Multi Exit Discriminator.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast network <network> route <string> med

origin (state only)

Route origin.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast network <network> route <string> origin

packet-length (state only)

Packet length.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast network <network> route <string> packet-length

nexthop (state only)

Route nexthop.

used (state only)

Nexthop used.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-unicast network <network> route <string> nexthop <nexthop> used

redistribute

Redistribute information from another routing protocol.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast
vrouter running ipv4-unicast# redistribute <redistribute> id <uint32> metric <uint32> \
... route-map ROUTE-MAP

<redistribute> values	Description
connected	Connected routes (directly attached subnet or host).
kernel	Kernel routes (not installed via the zebra RIB).
ospf	Open Shortest Path First (OSPFv2).
rip	Routing Information Protocol (RIP).
static	Statically configured routes.
table	Non-main Kernel Routing Table.

id

Instance or table ID.

id <uint32>

metric

Metric for redistributed routes.

metric <uint32>

route-map

Route-map name.

route-map ROUTE-MAP

ROUTE-MAP

Route map name.

route-target

Route target list.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast route-target

redirect-import

Flow-spec redirect type route target, Import routes to this address- family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast route-target
vrouter running route-target# redirect-import REDIRECT-IMPORT

REDIRECT-IMPORT values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

l3vpn

Specify route-target and route-distinguisher between this address family and VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn

export

For routes leaked from this address-family to VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn export

vpn

Export routes from this address-family to default instance VPN RIB.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn export
vrouter running export# vpn true|false

Default value

false

label

Label value (use auto to automatically assign a label).

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn export
vrouter running export# label LABEL

LABEL values	Description
<uint32>	No description.
auto	Automatically assign a label.

route-target

Specify route target list.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn export
vrouter running export# route-target ROUTE-TARGET

ROUTE-TARGET values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

route-distinguisher

Specify route distinguisher.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn export
vrouter running export# route-distinguisher ROUTE-DISTINGUISHER

ROUTE-DISTINGUISHER values	Description
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.

nexthop

Specify next hop to use for VRF advertised prefixes between the current address-family and VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn export
vrouter running export# nexthop NEXTHOP

NEXTHOP values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

route-map

Specify route map between the current address-family and VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn export
vrouter running export# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

import

For routes leaked from VPN to this address-family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn import

vpn

Import routes to this address-family from default instance VPN RIB.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn import
vrouter running import# vpn true|false

Default value

false

route-target

Specify route target list.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn import
vrouter running import# route-target ROUTE-TARGET

ROUTE-TARGET values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

route-map

Specify route map between the current address-family and VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast l3vpn import
vrouter running import# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

maximum-path

Forward packets over multiple paths.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast maximum-path

ebgp

Ebgp number of paths.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast maximum-path
vrouter running maximum-path# ebgp <uint8>

Default value

16

ibgp

Ibgp number of paths.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast maximum-path
vrouter running maximum-path# ibgp <uint8>

Default value

16

equal-cluster-length

If true, match the cluster length.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast maximum-path
vrouter running maximum-path# equal-cluster-length true|false

Default value

false

aggregate-address

Configure BGP aggregate entries.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast
vrouter running ipv4-unicast# aggregate-address <aggregate-address> as-set true|false \
... summary-only true|false

<aggregate-address>

An IPv4 prefix: address and CIDR mask.

as-set

If true, generate AS set path information.

as-set true|false

Default value

false

summary-only

If true, filter more specific routes from updates.

summary-only true|false

Default value

false

administrative-distance

Define administrative distance.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast
vrouter running ipv4-unicast# administrative-distance <administrative-distance> \
... distance <uint8> access-list ACCESS-LIST

<administrative-distance>

An IPv4 prefix: address and CIDR mask.

distance (mandatory)

Administrative distance.

distance <uint8>

access-list

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

bgp-distance

Configure BGP distance.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast bgp-distance

external-routes

Distance for routes external to the AS.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast bgp-distance
vrouter running bgp-distance# external-routes <uint8>

Default value

20

internal-routes

Distance for routes internal to the AS.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast bgp-distance
vrouter running bgp-distance# internal-routes <uint8>

Default value

200

local-routes

Distance for local routes.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-unicast bgp-distance
vrouter running bgp-distance# local-routes <uint8>

Default value

200

ipv4-multicast

Configure IPv4 multicast address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast

table-map

BGP table to RIB route download filter.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast
vrouter running ipv4-multicast# table-map TABLE-MAP

TABLE-MAP

Route map name.

enabled

Enable or disable IPv4 multicast Address Family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast
vrouter running ipv4-multicast# enabled true|false

Default value

true

dampening

Enable/Disable route-flap dampening in this address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast
vrouter running ipv4-multicast# dampening true|false

Default value

false

rib-count (state only)

Routing information base table count.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast rib-count

neighbor-count (state only)

Number of neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast neighbor-count

dynamic-neighbor-count (state only)

Number of dynamic neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast dynamic-neighbor-count

network

Specify networks to announce via BGP.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast network <network>

<network>

An IPv4 prefix: address and CIDR mask.

route-map

Route-map name.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast network <network>
vrouter running network <network># route-map ROUTE-MAP

ROUTE-MAP

Route map name.

backdoor

If true, specify a BGP backdoor route.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast network <network>
vrouter running network <network># backdoor true|false

Default value

false

label-index

Label index to associate with the prefix.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast network <network>
vrouter running network <network># label-index <uint32>

route (state only)

Route operational state.

validity (state only)

Route validity.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast network <network> route <string> validity

route-type (state only)

Internal or external route.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast network <network> route <string> route-type

prefix (state only)

Route prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast network <network> route <string> prefix

prefix-length (state only)

Route prefix length.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast network <network> route <string> prefix-length

med (state only)

Multi Exit Discriminator.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast network <network> route <string> med

origin (state only)

Route origin.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast network <network> route <string> origin

packet-length (state only)

Packet length.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast network <network> route <string> packet-length

nexthop (state only)

Route nexthop.

used (state only)

Nexthop used.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-multicast network <network> route <string> nexthop <nexthop> used

aggregate-address

Configure BGP aggregate entries.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast
vrouter running ipv4-multicast# aggregate-address <aggregate-address> as-set true|false \
... summary-only true|false

<aggregate-address>

An IPv4 prefix: address and CIDR mask.

as-set

If true, generate AS set path information.

as-set true|false

Default value

false

summary-only

If true, filter more specific routes from updates.

summary-only true|false

Default value

false

administrative-distance

Define administrative distance.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast
vrouter running ipv4-multicast# administrative-distance <administrative-distance> \
... distance <uint8> access-list ACCESS-LIST

<administrative-distance>

An IPv4 prefix: address and CIDR mask.

distance (mandatory)

Administrative distance.

distance <uint8>

access-list

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

bgp-distance

Configure BGP distance.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast bgp-distance

external-routes

Distance for routes external to the AS.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast bgp-distance
vrouter running bgp-distance# external-routes <uint8>

Default value

20

internal-routes

Distance for routes internal to the AS.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast bgp-distance
vrouter running bgp-distance# internal-routes <uint8>

Default value

200

local-routes

Distance for local routes.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-multicast bgp-distance
vrouter running bgp-distance# local-routes <uint8>

Default value

200

ipv4-flowspec

Configure IPv4 Flowspec address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-flowspec

enabled

Enable or disable IPv4 Flowspec Address Family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-flowspec
vrouter running ipv4-flowspec# enabled true|false

Default value

true

local-install

Interface name.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-flowspec
vrouter running ipv4-flowspec# local-install LOCAL-INSTALL

LOCAL-INSTALL

An interface name.

rib-count (state only)

Routing information base table count.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec rib-count

neighbor-count (state only)

Number of neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec neighbor-count

dynamic-neighbor-count (state only)

Number of dynamic neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec dynamic-neighbor-count

route (state only)

Route operational state.

to (state only)

Route destination prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> to

from (state only)

Route source prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> from

peer-id (state only)

Route state identifier.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> peer-id

validity (state only)

Route validity.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> validity

route-type (state only)

Internal or external route.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> route-type

prefix (state only)

Route prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> prefix

prefix-length (state only)

Route prefix length.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> prefix-length

med (state only)

Multi Exit Discriminator.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> med

origin (state only)

Route origin.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> origin

packet-length (state only)

Packet length.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> packet-length

nexthop (state only)

Route nexthop.

used (state only)

Nexthop used.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-flowspec route <uint32> nexthop <nexthop> used

ipv4-vpn

Configure IPv4 VPN address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-vpn

enabled

Enable or disable IPv4 VPN Address Family.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-vpn
vrouter running ipv4-vpn# enabled true|false

Default value

true

rib-count (state only)

Routing information base table count.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn rib-count

neighbor-count (state only)

Number of neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn neighbor-count

dynamic-neighbor-count (state only)

Number of dynamic neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn dynamic-neighbor-count

route-distinguisher

Specify a network to announce via BGP.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix>

<rd> values	Description
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.

<ip-prefix>

An IPv4 prefix: address and CIDR mask.

label

VPN NLRI label.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix>
vrouter running route-distinguisher <rd> <ip-prefix># label <uint32>

route-map

Route map name.

vrouter running config# vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix>
vrouter running route-distinguisher <rd> <ip-prefix># route-map ROUTE-MAP

ROUTE-MAP

Route map name.

route (state only)

Route operational state.

validity (state only)

Route validity.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix> route <string> validity

route-type (state only)

Internal or external route.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix> route <string> route-type

prefix (state only)

Route prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix> route <string> prefix

prefix-length (state only)

Route prefix length.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix> route <string> prefix-length

med (state only)

Multi Exit Discriminator.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix> route <string> med

origin (state only)

Route origin.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix> route <string> origin

packet-length (state only)

Packet length.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix> route <string> packet-length

nexthop (state only)

Route nexthop.

used (state only)

Nexthop used.

vrouter> show state vrf <vrf> routing bgp address-family ipv4-vpn route-distinguisher <rd> <ip-prefix> route <string> nexthop <nexthop> used

ipv6-unicast

Configure IPv6 unicast address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast

table-map

BGP table to RIB route download filter.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast
vrouter running ipv6-unicast# table-map TABLE-MAP

TABLE-MAP

Route map name.

enabled

Enable or disable IPv6 unicast Address Family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast
vrouter running ipv6-unicast# enabled true|false

Default value

true

rib-count (state only)

Routing information base table count.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast rib-count

neighbor-count (state only)

Number of neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast neighbor-count

dynamic-neighbor-count (state only)

Number of dynamic neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast dynamic-neighbor-count

network

Specify a network to announce via BGP.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast network <network>

<network>

An IPv6 prefix: address and CIDR mask.

route-map

Route-map name.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast network <network>
vrouter running network <network># route-map ROUTE-MAP

ROUTE-MAP

Route map name.

label-index

Label index to associate with the prefix.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast network <network>
vrouter running network <network># label-index <uint32>

route (state only)

Route operational state.

validity (state only)

Route validity.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast network <network> route <string> validity

route-type (state only)

Internal or external route.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast network <network> route <string> route-type

prefix (state only)

Route prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast network <network> route <string> prefix

prefix-length (state only)

Route prefix length.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast network <network> route <string> prefix-length

med (state only)

Multi Exit Discriminator.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast network <network> route <string> med

origin (state only)

Route origin.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast network <network> route <string> origin

packet-length (state only)

Packet length.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast network <network> route <string> packet-length

nexthop (state only)

Route nexthop.

used (state only)

Nexthop used.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-unicast network <network> route <string> nexthop <nexthop> used

aggregate-address

Configure BGP aggregate entries.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast
vrouter running ipv6-unicast# aggregate-address <aggregate-address> summary-only true|false

<aggregate-address>

An IPv6 prefix: address and CIDR mask.

summary-only

If true, filter more specific routes from updates.

summary-only true|false

Default value

false

redistribute

Redistribute information from another routing protocol.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast
vrouter running ipv6-unicast# redistribute <redistribute> metric <uint32> \
... route-map ROUTE-MAP

<redistribute> values	Description
connected	Connected routes (directly attached subnet or host).
kernel	Kernel routes (not installed via the zebra RIB).
ospf6	Open Shortest Path First IPv6 (OSPFv3).
ripng	Routing Information Protocol next-generation (IPv6) (RIPng).
static	Statically configured routes.
table	Non-main Kernel Routing Table.

metric

Metric for redistributed routes.

metric <uint32>

route-map

Route-map name.

route-map ROUTE-MAP

ROUTE-MAP

Route map name.

administrative-distance

Define administrative distance.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast
vrouter running ipv6-unicast# administrative-distance <administrative-distance> \
... distance <uint8> access-list ACCESS-LIST

<administrative-distance>

An IPv6 prefix: address and CIDR mask.

distance (mandatory)

Administrative distance.

distance <uint8>

access-list

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

route-target

Route target list.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast route-target

redirect-import

Flow-spec redirect type route target, Import routes to this address- family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast route-target
vrouter running route-target# redirect-import REDIRECT-IMPORT

REDIRECT-IMPORT values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

l3vpn

Specify route-target and route-distinguisher between this address family and VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn

export

For routes leaked from this address-family to VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn export

vpn

Export routes from this address-family to default instance VPN RIB.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn export
vrouter running export# vpn true|false

Default value

false

label

Label value (use auto to automatically assign a label).

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn export
vrouter running export# label LABEL

LABEL values	Description
<uint32>	No description.
auto	Automatically assign a label.

route-target

Specify route target list.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn export
vrouter running export# route-target ROUTE-TARGET

ROUTE-TARGET values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

route-distinguisher

Specify route distinguisher.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn export
vrouter running export# route-distinguisher ROUTE-DISTINGUISHER

ROUTE-DISTINGUISHER values	Description
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.

nexthop

Specify next hop to use for VRF advertised prefixes between the current address-family and VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn export
vrouter running export# nexthop NEXTHOP

NEXTHOP values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

route-map

Specify route map between the current address-family and VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn export
vrouter running export# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

import

For routes leaked from VPN to this address-family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn import

vpn

Import routes to this address-family from default instance VPN RIB.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn import
vrouter running import# vpn true|false

Default value

false

route-target

Specify route target list.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn import
vrouter running import# route-target ROUTE-TARGET

ROUTE-TARGET values	Description
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.
<string>	Extended communities or route-target attribute.

route-map

Specify route map between the current address-family and VPN.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast l3vpn import
vrouter running import# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

maximum-path

Forward packets over multiple paths.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast maximum-path

ebgp

Ebgp number of paths.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast maximum-path
vrouter running maximum-path# ebgp <uint8>

Default value

16

ibgp

Ibgp number of paths.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast maximum-path
vrouter running maximum-path# ibgp <uint8>

Default value

16

equal-cluster-length

If true, match the cluster length.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast maximum-path
vrouter running maximum-path# equal-cluster-length true|false

Default value

false

bgp-distance

Configure BGP distance.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast bgp-distance

external-routes

Distance for routes external to the AS.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast bgp-distance
vrouter running bgp-distance# external-routes <uint8>

Default value

20

internal-routes

Distance for routes internal to the AS.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast bgp-distance
vrouter running bgp-distance# internal-routes <uint8>

Default value

200

local-routes

Distance for local routes.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-unicast bgp-distance
vrouter running bgp-distance# local-routes <uint8>

Default value

200

ipv6-multicast

Configure IPv6 multicast address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast

enabled

Enable or disable IPv6 multicast Address Family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast
vrouter running ipv6-multicast# enabled true|false

Default value

true

rib-count (state only)

Routing information base table count.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast rib-count

neighbor-count (state only)

Number of neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast neighbor-count

dynamic-neighbor-count (state only)

Number of dynamic neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast dynamic-neighbor-count

network

Specify a network to announce via BGP.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast network <network>

<network>

An IPv6 prefix: address and CIDR mask.

route-map

Route-map name.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast network <network>
vrouter running network <network># route-map ROUTE-MAP

ROUTE-MAP

Route map name.

label-index

Label index to associate with the prefix.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast network <network>
vrouter running network <network># label-index <uint32>

route (state only)

Route operational state.

validity (state only)

Route validity.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast network <network> route <string> validity

route-type (state only)

Internal or external route.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast network <network> route <string> route-type

prefix (state only)

Route prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast network <network> route <string> prefix

prefix-length (state only)

Route prefix length.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast network <network> route <string> prefix-length

med (state only)

Multi Exit Discriminator.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast network <network> route <string> med

origin (state only)

Route origin.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast network <network> route <string> origin

packet-length (state only)

Packet length.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast network <network> route <string> packet-length

nexthop (state only)

Route nexthop.

used (state only)

Nexthop used.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-multicast network <network> route <string> nexthop <nexthop> used

administrative-distance

Define administrative distance.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast
vrouter running ipv6-multicast# administrative-distance <administrative-distance> \
... distance <uint8> access-list ACCESS-LIST

<administrative-distance>

An IPv6 prefix: address and CIDR mask.

distance (mandatory)

Administrative distance.

distance <uint8>

access-list

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

bgp-distance

Configure BGP distance.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast bgp-distance

external-routes

Distance for routes external to the AS.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast bgp-distance
vrouter running bgp-distance# external-routes <uint8>

Default value

20

internal-routes

Distance for routes internal to the AS.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast bgp-distance
vrouter running bgp-distance# internal-routes <uint8>

Default value

200

local-routes

Distance for local routes.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-multicast bgp-distance
vrouter running bgp-distance# local-routes <uint8>

Default value

200

ipv6-labeled-unicast

Configure IPv6 labeled unicast address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-labeled-unicast

enabled

Enable or disable IPv6 labeled unicast Address Family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# enabled true|false

Default value

true

rib-count (state only)

Routing information base table count.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-labeled-unicast rib-count

neighbor-count (state only)

Number of neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-labeled-unicast neighbor-count

dynamic-neighbor-count (state only)

Number of dynamic neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-labeled-unicast dynamic-neighbor-count

maximum-path

Forward packets over multiple paths.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-labeled-unicast maximum-path

ebgp

Ebgp number of paths.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-labeled-unicast maximum-path
vrouter running maximum-path# ebgp <uint8>

Default value

16

ibgp

Ibgp number of paths.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-labeled-unicast maximum-path
vrouter running maximum-path# ibgp <uint8>

Default value

16

equal-cluster-length

If true, match the cluster length.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-labeled-unicast maximum-path
vrouter running maximum-path# equal-cluster-length true|false

Default value

false

ipv6-vpn

Configure IPv6 VPN address family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-vpn

enabled

Enable or disable IPv6 VPN Address Family.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-vpn
vrouter running ipv6-vpn# enabled true|false

Default value

true

rib-count (state only)

Routing information base table count.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn rib-count

neighbor-count (state only)

Number of neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn neighbor-count

dynamic-neighbor-count (state only)

Number of dynamic neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn dynamic-neighbor-count

route-distinguisher

Specify a network to announce via BGP.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix>

<rd> values	Description
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.

<ip-prefix>

An IPv6 prefix: address and CIDR mask.

label

VPN NLRI label.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix>
vrouter running route-distinguisher <rd> <ip-prefix># label <uint32>

route-map

Route map name.

vrouter running config# vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix>
vrouter running route-distinguisher <rd> <ip-prefix># route-map ROUTE-MAP

ROUTE-MAP

Route map name.

route (state only)

Route operational state.

validity (state only)

Route validity.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix> route <string> validity

route-type (state only)

Internal or external route.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix> route <string> route-type

prefix (state only)

Route prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix> route <string> prefix

prefix-length (state only)

Route prefix length.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix> route <string> prefix-length

med (state only)

Multi Exit Discriminator.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix> route <string> med

origin (state only)

Route origin.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix> route <string> origin

packet-length (state only)

Packet length.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix> route <string> packet-length

nexthop (state only)

Route nexthop.

used (state only)

Nexthop used.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-vpn route-distinguisher <rd> <ip-prefix> route <string> nexthop <nexthop> used

ipv6-flowspec (state only)

Configure IPv6 Flowspec address family.

rib-count (state only)

Routing information base table count.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec rib-count

neighbor-count (state only)

Number of neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec neighbor-count

dynamic-neighbor-count (state only)

Number of dynamic neighbors for this address family.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec dynamic-neighbor-count

route (state only)

Route operational state.

to (state only)

Route destination prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> to

from (state only)

Route source prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> from

peer-id (state only)

Route state identifier.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> peer-id

validity (state only)

Route validity.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> validity

route-type (state only)

Internal or external route.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> route-type

prefix (state only)

Route prefix.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> prefix

prefix-length (state only)

Route prefix length.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> prefix-length

med (state only)

Multi Exit Discriminator.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> med

origin (state only)

Route origin.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> origin

packet-length (state only)

Packet length.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> packet-length

nexthop (state only)

Route nexthop.

used (state only)

Nexthop used.

vrouter> show state vrf <vrf> routing bgp address-family ipv6-flowspec route <uint32> nexthop <nexthop> used

neighbor-group

List of BGP peer-groups configured on the local system - uniquely identified by peer-group name.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>

<string>

Reference to the name of the BGP neighbor-group used as a key in the neighbor-group list.

remote-as

Remote AS number.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># remote-as REMOTE-AS

REMOTE-AS values	Description
<uint32>	No description.
external	External BGP peer.
internal	Internal BGP peer.

capability

Advertise capability to the peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># capability CAPABILITY

CAPABILITY values	Description
dynamic	Advertise dynamic capability to this neighbor.
extended-nexthop	Advertise extended nexthop capability to the peer.

capability-negotiate

If true, perform capability negotiation.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># capability-negotiate true|false

Default value

true

ebgp-multihop

Allow EBGP neighbors not on directly connected networks.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># ebgp-multihop <uint8>

enforce-first-as

If true, enforce the first AS for EBGP routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># enforce-first-as true|false

Default value

false

enforce-multihop

If true, enforce EBGP neighbors perform multihop.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># enforce-multihop true|false

Default value

false

neighbor-description

Neighbor specific description: up to 80 characters describing this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># neighbor-description <string>

override-capability

If true, override capability negotiation result.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># override-capability true|false

Default value

false

passive

If true, don’t send open messages to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># passive true|false

Default value

false

password

Set a password.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># password <string>

solo

If true, solo peer - part of its own update group.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># solo true|false

Default value

false

strict-capability-match

Enable or disable strict capability negotiation match.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># strict-capability-match true|false

Default value

false

track

A tracker name. If the tracked address is reachable, the neighbor is considered as valid, else it is disabled.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># track TRACK

TRACK values	Description
<tracker-name>	An tracker name.
<identityref>	No description.

check-control-plane-failure

Link data-plane status with BGP control-plane.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># check-control-plane-failure true|false

ttl-security-hops

Specify the maximum number of hops to the BGP peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># ttl-security-hops <uint8>

update-source

Source of routing updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string>
vrouter running neighbor-group <string># update-source UPDATE-SOURCE

UPDATE-SOURCE values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
<ifname>	An interface name.

remote-neighbor-group (state only)

Remote neighbor group.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> remote-neighbor-group

remote-router-id (state only)

Remote router identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> remote-router-id

state (state only)

BGP router status.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> state

min-time-btwn-advertisement (state only)

Minimum time between advertisement runs in miliseconds.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> min-time-btwn-advertisement

last-reset (state only)

Last reset.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> last-reset

bgp-connection (state only)

BGP connection type.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> bgp-connection

connect-retry-timer (state only)

BGP connect retry timer in seconds.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> connect-retry-timer

estimated-rount-trip-time (state only)

Estimated round trip time in miliseconds.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> estimated-rount-trip-time

local-as

Specify a local-as number.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> local-as

as-number (mandatory)

AS number used as local AS.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> local-as
vrouter running local-as# as-number <uint32>

no-prepend

If true, do not prepend local-as to updates from ebgp peers.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> local-as
vrouter running local-as# no-prepend true|false

Default value

false

replace-as

If true, do not prepend local-as to updates from ibgp peers.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> local-as
vrouter running local-as# replace-as true|false

Default value

false

shutdown

Administratively shut down this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> shutdown

message

Shutdown message.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> shutdown
vrouter running shutdown# message <string>

timers

Config parameters related to timers associated with the BGP peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> timers

advertisement-interval

Minimum time which must elapse between subsequent UPDATE messages relating to a common set of NLRI being transmitted to a peer. This timer is referred to as MinRouteAdvertisementIntervalTimer by RFC 4721 and serves to reduce the number of UPDATE messages transmitted when a particular set of NLRI exhibit instability.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> timers
vrouter running timers# advertisement-interval <uint16>

connect-retry

Time interval in seconds between attempts to establish a session with the peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> timers
vrouter running timers# connect-retry <uint16>

keepalive-interval

Time interval in seconds between transmission of keepalive messages to the neighbor. Typically set to 1/3 the hold-time.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> timers
vrouter running timers# keepalive-interval <uint16>

hold-time

Time interval in seconds that a BGP session will be considered active in the absence of keepalive or other messages from the peer. The hold- time is typically set to 3x the keepalive-interval.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> timers
vrouter running timers# hold-time <uint16>

address-family

Address-families associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family

ipv4-unicast

IPv4 unicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast

enabled

Enable or disable IPv4 unicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast
vrouter running ipv4-unicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-unicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv4-multicast

IPv4 multicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast

enabled

Enable or disable IPv4 multicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast
vrouter running ipv4-multicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-multicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv4-labeled-unicast

IPv4 labeled unicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast

enabled

Enable or disable IPv4 labeled unicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-labeled-unicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv4-flowspec

IPv4 Flowspec address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec

enabled

Enable or disable IPv4 Flowspec Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec
vrouter running ipv4-flowspec# enabled true|false

Default value

true

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec
vrouter running ipv4-flowspec# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec
vrouter running ipv4-flowspec# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec
vrouter running ipv4-flowspec# route-reflector-client true|false

Default value

false

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec accepted-prefix

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec
vrouter running ipv4-flowspec# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec
vrouter running ipv4-flowspec# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-flowspec
vrouter running ipv4-flowspec# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

ipv4-vpn

Configure IPv4 VPN address family.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn

enabled

Enable or disable IPv4 VPN Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# enabled true|false

Default value

true

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# route-reflector-client true|false

Default value

false

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# distribute-list <distribute-list>

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# filter-list <filter-list>

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# prefix-list <prefix-list>

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv4-vpn
vrouter running ipv4-vpn# route-map <route-map>

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

ipv6-unicast

IPv6 unicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast

enabled

Enable or disable IPv6 unicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# enabled true|false

Default value

true

nexthop-local-unchanged

If true, leave link-local nexthop unchanged for this peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# nexthop-local-unchanged true|false

Default value

false

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast
vrouter running ipv6-unicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-unicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv6-multicast

IPv6 multicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast

enabled

Enable or disable IPv6 multicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast
vrouter running ipv6-multicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-multicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv6-labeled-unicast

IPv6 labeled unicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast

enabled

Enable or disable IPv6 labeled unicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-labeled-unicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv6-flowspec

IPv6 Flowspec address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec

enabled

Enable or disable IPv6 Flowspec Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec
vrouter running ipv6-flowspec# enabled true|false

Default value

true

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec
vrouter running ipv6-flowspec# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec
vrouter running ipv6-flowspec# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec
vrouter running ipv6-flowspec# route-reflector-client true|false

Default value

false

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec accepted-prefix

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec
vrouter running ipv6-flowspec# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec
vrouter running ipv6-flowspec# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-flowspec
vrouter running ipv6-flowspec# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

ipv6-vpn

Configure IPv6 VPN address family.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn

enabled

Enable or disable IPv6 VPN Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# enabled true|false

Default value

true

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# route-reflector-client true|false

Default value

false

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# distribute-list <distribute-list>

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# filter-list <filter-list>

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# prefix-list <prefix-list>

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor-group <string> address-family ipv6-vpn
vrouter running ipv6-vpn# route-map <route-map>

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

connections (state only)

Established/dropped connections statistics.

established (state only)

Number of established connections.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> connections established

dropped (state only)

Number of dropped connections.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> connections dropped

local-host (state only)

Local host data.

name (state only)

Local host name.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> local-host name

port (state only)

Local host port.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> local-host port

remote-host (state only)

Remote host data.

name (state only)

Remote host name.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> remote-host name

port (state only)

Remote host port.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> remote-host port

nexthop (state only)

Nexthop data.

address (state only)

Nexthop IP address.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> nexthop address

global-address (state only)

Nexthop global IP address.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> nexthop global-address

local-address (state only)

Nexthop local IP address.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> nexthop local-address

thread (state only)

Read/Write thread.

read-enabled (state only)

Read thread status.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> thread read-enabled

write-enabled (state only)

Write thread status.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> thread write-enabled

message-statistics (state only)

Neighbor messages statistics.

packet-wait-process (state only)

Number of packets waiting to be processed.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics packet-wait-process

packet-wait-written (state only)

Number of packets waiting to be written.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics packet-wait-written

open-sent (state only)

BGP open messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics open-sent

opens-received (state only)

BGP open messages received.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics opens-received

notifications-sent (state only)

Notifications messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics notifications-sent

notifications-received (state only)

Notification messages received.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics notifications-received

updates-sent (state only)

Update messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics updates-sent

updates-received (state only)

Update messages received.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics updates-received

keepalives-sent (state only)

Keepalive messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics keepalives-sent

keepalives-received (state only)

Keepalive messages received.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics keepalives-received

route-refresh-sent (state only)

Route refresh messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics route-refresh-sent

route-refresh-received (state only)

Route refresh messages received.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics route-refresh-received

capability-sent (state only)

Capability messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics capability-sent

capability-received (state only)

Capability messages received.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics capability-received

total-sent (state only)

Total messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics total-sent

total-received (state only)

Total messages received.

vrouter> show state vrf <vrf> routing bgp neighbor-group <string> message-statistics total-received

neighbor

List of BGP neighbors configured on the local system, uniquely identified by peer IPv[46] address.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>

<neighbor> values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

neighbor-group

Peer group name.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># neighbor-group <neighbor-group>

interface

Name of the interface.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># interface INTERFACE

INTERFACE

An interface name.

port

TCP port number.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># port PORT

PORT	A 16-bit port number used by a transport protocol such as TCP or UDP.

remote-as

Remote AS number.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># remote-as REMOTE-AS

REMOTE-AS values	Description
<uint32>	No description.
external	External BGP peer.
internal	Internal BGP peer.

capability

Advertise capability to the peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># capability CAPABILITY

CAPABILITY values	Description
dynamic	Advertise dynamic capability to this neighbor.
extended-nexthop	Advertise extended nexthop capability to the peer.

capability-negotiate

If true, perform capability negotiation.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># capability-negotiate true|false

Default value

true

ebgp-multihop

Allow EBGP neighbors not on directly connected networks.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># ebgp-multihop <uint8>

enforce-first-as

If true, enforce the first AS for EBGP routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># enforce-first-as true|false

Default value

false

enforce-multihop

If true, enforce EBGP neighbors perform multihop.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># enforce-multihop true|false

Default value

false

neighbor-description

Neighbor specific description: up to 80 characters describing this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># neighbor-description <string>

override-capability

If true, override capability negotiation result.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># override-capability true|false

Default value

false

passive

If true, don’t send open messages to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># passive true|false

Default value

false

password

Set a password.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># password <string>

solo

If true, solo peer - part of its own update group.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># solo true|false

Default value

false

strict-capability-match

Enable or disable strict capability negotiation match.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># strict-capability-match true|false

Default value

false

track

A tracker name. If the tracked address is reachable, the neighbor is considered as valid, else it is disabled.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># track TRACK

TRACK values	Description
<tracker-name>	An tracker name.
<identityref>	No description.

check-control-plane-failure

Link data-plane status with BGP control-plane.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># check-control-plane-failure true|false

ttl-security-hops

Specify the maximum number of hops to the BGP peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># ttl-security-hops <uint8>

update-source

Source of routing updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor>
vrouter running neighbor <neighbor># update-source UPDATE-SOURCE

UPDATE-SOURCE values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
<ifname>	An interface name.

remote-neighbor-group (state only)

Remote neighbor group.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> remote-neighbor-group

remote-router-id (state only)

Remote router identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> remote-router-id

state (state only)

BGP router status.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> state

min-time-btwn-advertisement (state only)

Minimum time between advertisement runs in miliseconds.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> min-time-btwn-advertisement

last-reset (state only)

Last reset.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> last-reset

bgp-connection (state only)

BGP connection type.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> bgp-connection

connect-retry-timer (state only)

BGP connect retry timer in seconds.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> connect-retry-timer

estimated-rount-trip-time (state only)

Estimated round trip time in miliseconds.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> estimated-rount-trip-time

local-as

Specify a local-as number.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> local-as

as-number (mandatory)

AS number used as local AS.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> local-as
vrouter running local-as# as-number <uint32>

no-prepend

If true, do not prepend local-as to updates from ebgp peers.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> local-as
vrouter running local-as# no-prepend true|false

Default value

false

replace-as

If true, do not prepend local-as to updates from ibgp peers.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> local-as
vrouter running local-as# replace-as true|false

Default value

false

shutdown

Administratively shut down this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> shutdown

message

Shutdown message.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> shutdown
vrouter running shutdown# message <string>

timers

Config parameters related to timers associated with the BGP peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> timers

advertisement-interval

Minimum time which must elapse between subsequent UPDATE messages relating to a common set of NLRI being transmitted to a peer. This timer is referred to as MinRouteAdvertisementIntervalTimer by RFC 4721 and serves to reduce the number of UPDATE messages transmitted when a particular set of NLRI exhibit instability.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> timers
vrouter running timers# advertisement-interval <uint16>

connect-retry

Time interval in seconds between attempts to establish a session with the peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> timers
vrouter running timers# connect-retry <uint16>

keepalive-interval

Time interval in seconds between transmission of keepalive messages to the neighbor. Typically set to 1/3 the hold-time.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> timers
vrouter running timers# keepalive-interval <uint16>

hold-time

Time interval in seconds that a BGP session will be considered active in the absence of keepalive or other messages from the peer. The hold- time is typically set to 3x the keepalive-interval.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> timers
vrouter running timers# hold-time <uint16>

address-family

Address-families associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family

ipv4-unicast

IPv4 unicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast

enabled

Enable or disable IPv4 unicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast
vrouter running ipv4-unicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-unicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv4-multicast

IPv4 multicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast

enabled

Enable or disable IPv4 multicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast
vrouter running ipv4-multicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-multicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv4-labeled-unicast

IPv4 labeled unicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast

enabled

Enable or disable IPv4 labeled unicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast
vrouter running ipv4-labeled-unicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-labeled-unicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv4-flowspec

IPv4 Flowspec address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec

enabled

Enable or disable IPv4 Flowspec Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec
vrouter running ipv4-flowspec# enabled true|false

Default value

true

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec
vrouter running ipv4-flowspec# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec
vrouter running ipv4-flowspec# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec
vrouter running ipv4-flowspec# route-reflector-client true|false

Default value

false

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec accepted-prefix

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec
vrouter running ipv4-flowspec# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec
vrouter running ipv4-flowspec# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-flowspec
vrouter running ipv4-flowspec# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

ipv4-vpn

Configure IPv4 VPN address family.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn

enabled

Enable or disable IPv4 VPN Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# enabled true|false

Default value

true

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# route-reflector-client true|false

Default value

false

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# distribute-list <distribute-list>

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# filter-list <filter-list>

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# prefix-list <prefix-list>

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv4-vpn
vrouter running ipv4-vpn# route-map <route-map>

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

ipv6-unicast

IPv6 unicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast

enabled

Enable or disable IPv6 unicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# enabled true|false

Default value

true

nexthop-local-unchanged

If true, leave link-local nexthop unchanged for this peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# nexthop-local-unchanged true|false

Default value

false

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast
vrouter running ipv6-unicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-unicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv6-multicast

IPv6 multicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast

enabled

Enable or disable IPv6 multicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast
vrouter running ipv6-multicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-multicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv6-labeled-unicast

IPv6 labeled unicast address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast

enabled

Enable or disable IPv6 labeled unicast Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# enabled true|false

Default value

true

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# route-reflector-client true|false

Default value

false

capability-orf-prefix-list

Advertise prefixlist ORF capability to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# capability-orf-prefix-list CAPABILITY-ORF-PREFIX-LIST

CAPABILITY-ORF-PREFIX-LIST values	Description
both	Capability to SEND and RECEIVE the ORF to/from this neighbor.
send	Capability to SEND the ORF to this neighbor.
receive	Capability to RECEIVE the ORF from this neighbor.

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# distribute-list <distribute-list> access-list ACCESS-LIST

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list ACCESS-LIST

ACCESS-LIST

Access list name.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast
vrouter running ipv6-labeled-unicast# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

default-originate

Originate default route to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast default-originate

route-map

Route-map to specify criteria to originate default.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-labeled-unicast default-originate
vrouter running default-originate# route-map ROUTE-MAP

ROUTE-MAP

Route map name.

ipv6-flowspec

IPv6 Flowspec address-family associated with the BGP neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec

enabled

Enable or disable IPv6 Flowspec Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec
vrouter running ipv6-flowspec# enabled true|false

Default value

true

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec
vrouter running ipv6-flowspec# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec
vrouter running ipv6-flowspec# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec
vrouter running ipv6-flowspec# route-reflector-client true|false

Default value

false

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec accepted-prefix

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec
vrouter running ipv6-flowspec# filter-list <filter-list> access-list <as-path-access-list...

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

access-list (mandatory)

Access list name.

access-list <as-path-access-list>

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec
vrouter running ipv6-flowspec# prefix-list <prefix-list> prefix-list-name PREFIX-LIST-NAME

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list-name (mandatory)

Name of the prefix list.

prefix-list-name PREFIX-LIST-NAME

PREFIX-LIST-NAME

Prefix list name.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-flowspec
vrouter running ipv6-flowspec# route-map <route-map> route-map-name ROUTE-MAP-NAME

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

route-map-name (mandatory)

Route-map name.

route-map-name ROUTE-MAP-NAME

ROUTE-MAP-NAME

Route map name.

ipv6-vpn

Configure IPv6 VPN address family.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn

enabled

Enable or disable IPv6 VPN Address Family for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# enabled true|false

Default value

true

unsuppress-map

Route-map to selectively unsuppress suppressed routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# unsuppress-map UNSUPPRESS-MAP

UNSUPPRESS-MAP

Route map name.

as-override

If true, disable checking if nexthop is connected on ebgp sessions.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# as-override true|false

Default value

false

send-community

Send Community attribute to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# send-community SEND-COMMUNITY

SEND-COMMUNITY values	Description
all	Send Standard and Extended Community attributes.
extended	Send Extended Community attributes.
standard	Send Standard Community attributes.
none	Do not send Standard or Extended Community attributes.

Default value

all

weight

Set default weight for routes from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# weight <uint16>

allowas-in

Accept as-path with my AS present in it.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# allowas-in ALLOWAS-IN

ALLOWAS-IN values	Description
<uint8>	No description.
origin	Only accept my AS in the as-path if the route was originated in my AS.

attribute-unchanged

BGP attribute is propagated unchanged to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# attribute-unchanged ATTRIBUTE-UNCHANGED

ATTRIBUTE-UNCHANGED values	Description
as-path	As-path attribute.
med	Med attribute.
nexthop	Nexthop attribute.

route-server-client

If true, configure a neighbor as Route Server client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# route-server-client true|false

Default value

false

soft-reconfiguration-inbound

If true, allow inbound soft reconfiguration for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# soft-reconfiguration-inbound true|false

Default value

false

route-reflector-client

If true, configure a neighbor as Route Reflector client.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# route-reflector-client true|false

Default value

false

update-group-id (state only)

Update group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn update-group-id

sub-group-id (state only)

Sub-group identifier.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn sub-group-id

packet-queue-length (state only)

Packet queue length.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn packet-queue-length

accepted-prefix (state only)

Accepted prefix counter.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn accepted-prefix

addpath

Configure addpath.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn addpath

tx-all-paths

If true, use addpath to advertise all paths to a neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn addpath
vrouter running addpath# tx-all-paths true|false

Default value

false

tx-best-path-per-AS

If true, use addpath to advertise the bestpath per each neighboring AS.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn addpath
vrouter running addpath# tx-best-path-per-AS true|false

Default value

false

distribute-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# distribute-list <distribute-list>

<distribute-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

maximum-prefix

Maximum number of prefixes to accept from this peer.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn maximum-prefix

maximum (mandatory)

Maximum number of prefix limit.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn maximum-prefix
vrouter running maximum-prefix# maximum <uint32>

threshold

Threshold value (%) at which to generate a warning msg.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn maximum-prefix
vrouter running maximum-prefix# threshold <uint8>

Default value

75

restart

Restart interval in minutes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn maximum-prefix
vrouter running maximum-prefix# restart <uint16>

warning-only

If true, only give warning message when limit is exceeded.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn maximum-prefix
vrouter running maximum-prefix# warning-only true|false

Default value

false

nexthop-self

Disable the next hop calculation for this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn nexthop-self

force

If true, set the next hop to self for reflected routes.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn nexthop-self
vrouter running nexthop-self# force true|false

Default value

false

as-outbound-update

Remove or replace ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn as-outbound-update

action

Action to apply for ASNs in outbound updates.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn as-outbound-update
vrouter running as-outbound-update# action ACTION

ACTION values	Description
replace	Replace ASNs in outbound updates by our ASN.
remove	Remove ASN in outbound updates.

Default value

remove

as-type

Apply to private AS numbers or all.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn as-outbound-update
vrouter running as-outbound-update# as-type AS-TYPE

AS-TYPE values	Description
private	Apply to private AS numbers only.
all	Apply to all AS numbers.

Default value

private

filter-list

Establish BGP filters.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# filter-list <filter-list>

<filter-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

prefix-list

Filter updates to/from this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# prefix-list <prefix-list>

<prefix-list> values	Description
in	Filter incoming updates.
out	Filter outgoing updates.

route-map

Apply route map to this neighbor.

vrouter running config# vrf <vrf> routing bgp neighbor <neighbor> address-family ipv6-vpn
vrouter running ipv6-vpn# route-map <route-map>

<route-map> values	Description
in	Apply map to incoming routes.
out	Apply map to outbound routes.

connections (state only)

Established/dropped connections statistics.

established (state only)

Number of established connections.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> connections established

dropped (state only)

Number of dropped connections.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> connections dropped

local-host (state only)

Local host data.

name (state only)

Local host name.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> local-host name

port (state only)

Local host port.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> local-host port

remote-host (state only)

Remote host data.

name (state only)

Remote host name.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> remote-host name

port (state only)

Remote host port.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> remote-host port

nexthop (state only)

Nexthop data.

address (state only)

Nexthop IP address.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> nexthop address

global-address (state only)

Nexthop global IP address.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> nexthop global-address

local-address (state only)

Nexthop local IP address.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> nexthop local-address

thread (state only)

Read/Write thread.

read-enabled (state only)

Read thread status.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> thread read-enabled

write-enabled (state only)

Write thread status.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> thread write-enabled

message-statistics (state only)

Neighbor messages statistics.

packet-wait-process (state only)

Number of packets waiting to be processed.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics packet-wait-process

packet-wait-written (state only)

Number of packets waiting to be written.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics packet-wait-written

open-sent (state only)

BGP open messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics open-sent

opens-received (state only)

BGP open messages received.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics opens-received

notifications-sent (state only)

Notifications messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics notifications-sent

notifications-received (state only)

Notification messages received.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics notifications-received

updates-sent (state only)

Update messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics updates-sent

updates-received (state only)

Update messages received.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics updates-received

keepalives-sent (state only)

Keepalive messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics keepalives-sent

keepalives-received (state only)

Keepalive messages received.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics keepalives-received

route-refresh-sent (state only)

Route refresh messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics route-refresh-sent

route-refresh-received (state only)

Route refresh messages received.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics route-refresh-received

capability-sent (state only)

Capability messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics capability-sent

capability-received (state only)

Capability messages received.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics capability-received

total-sent (state only)

Total messages sent.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics total-sent

total-received (state only)

Total messages received.

vrouter> show state vrf <vrf> routing bgp neighbor <neighbor> message-statistics total-received