3.2.19. interfaceΒΆ
- bridge
- mtu
- promiscuous
- description
- enabled
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ethernet
- ipv4
- ipv6
- link-interface
- qos
- ingress
- egress
- counters (state only)
- gre
- mtu
- promiscuous
- description
- enabled
- local (mandatory)
- remote (mandatory)
- ttl
- tos
- link-interface
- link-vrf
- checksum
- sequence-number
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- key
- qos
- ingress
- egress
- counters (state only)
- ipip
- mtu
- promiscuous
- description
- enabled
- local (mandatory)
- remote (mandatory)
- ttl
- tos
- link-interface
- link-vrf
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- qos
- ingress
- egress
- counters (state only)
- lag
- mtu
- promiscuous
- description
- enabled
- mode (mandatory)
- xmit-hash-policy
- lacp-rate
- mii-link-monitoring
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ethernet
- ipv4
- ipv6
- link-interface
- qos
- ingress
- egress
- counters (state only)
- loopback
- mtu
- promiscuous
- description
- enabled
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- ethernet
- qos
- ingress
- egress
- counters (state only)
- physical
- port (mandatory)
- mtu
- promiscuous
- description
- enabled
- rx-cp-protection
- tx-cp-protection
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- ethernet
- qos
- ingress
- egress
- scheduler (config only)
- rate-limit
- scheduler (state only)
- core (state only)
- pq (state only)
- pb-dwrr (state only)
- counters (state only)
- system-loopback (state only)
- mtu (state only)
- promiscuous (state only)
- description (state only)
- enabled (state only)
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4 (state only)
- enabled (state only)
- address (state only)
- neighbor (state only)
- dhcp (state only)
- enabled (state only)
- timeout (state only)
- retry (state only)
- select-timeout (state only)
- reboot (state only)
- initial-interval (state only)
- dhcp-lease-time (state only)
- dhcp-client-identifier-ascii (state only)
- dhcp-client-identifier-hexa (state only)
- host-name (state only)
- request (state only)
- current-lease (state only)
- ipv6 (state only)
- counters (state only)
- veth
- mtu
- promiscuous
- description
- enabled
- link-interface (mandatory)
- link-vrf (mandatory)
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ipv4
- ipv6
- ethernet
- qos
- ingress
- egress
- counters (state only)
- vlan
- mtu
- promiscuous
- description
- enabled
- vlan-id (mandatory)
- link-interface (mandatory)
- protocol
- link-vrf
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ethernet
- ipv4
- ipv6
- qos
- ingress
- egress
- counters (state only)
- vxlan
- mtu
- promiscuous
- description
- enabled
- vni (mandatory)
- group
- local
- ttl
- tos
- link-interface
- link-vrf
- learning
- gbp
- dst
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- ethernet
- ipv4
- ipv6
- src-range
- qos
- ingress
- egress
- counters (state only)
- xvrf
- mtu
- promiscuous
- description
- enabled
- link-interface (mandatory)
- link-vrf (mandatory)
- ifindex (state only)
- admin-status (state only)
- oper-status (state only)
- last-change (state only)
- qos
- ingress
- egress
- counters (state only)