ospf6¶
Note
requires a Turbo Router Network License.
OSPFv3 configuration.
vrouter running config# vrf <vrf> routing ospf6
enabled¶
Enable or disable OSPFv3.
vrouter running config# vrf <vrf> routing ospf6
vrouter running ospf6# enabled true|false
- Default value
true
router-id¶
OSPFv3 router-id in IP address format.
vrouter running config# vrf <vrf> routing ospf6
vrouter running ospf6# router-id ROUTER-ID
ROUTER-ID |
An IPv4 address. |
auto-cost¶
Calculate OSPF interface cost according to reference bandwidth (Mbits per second).
vrouter running config# vrf <vrf> routing ospf6
vrouter running ospf6# auto-cost <uint32>
- Default value
100000
log-adjacency-changes¶
Log changes in adjacency state.
vrouter running config# vrf <vrf> routing ospf6
vrouter running ospf6# log-adjacency-changes LOG-ADJACENCY-CHANGES
|
Description |
---|---|
standard |
Standard logs. |
detail |
Log all state changes. |
area¶
OSPFv3 area parameters.
vrouter running config# vrf <vrf> routing ospf6 area <area>
|
Description |
---|---|
<uint32> |
OSPF area ID. |
<A.B.C.D> |
An IPv4 address. |
export-list¶
Set the filter for networks announced to other areas (access-list name).
vrouter running config# vrf <vrf> routing ospf6 area <area>
vrouter running area <area># export-list <string>
import-list¶
Set the filter for networks from other areas announced to the specified one (access-list name).
vrouter running config# vrf <vrf> routing ospf6 area <area>
vrouter running area <area># import-list <string>
stub¶
Configure area as stub.
vrouter running config# vrf <vrf> routing ospf6 area <area> stub
summary¶
Inject inter-area routes into stub.
vrouter running config# vrf <vrf> routing ospf6 area <area> stub
vrouter running stub# summary true|false
- Default value
true
filter-list¶
Filter networks between areas.
vrouter running config# vrf <vrf> routing ospf6 area <area> filter-list
input¶
Filter networks sent to this area (prefix-list name).
vrouter running config# vrf <vrf> routing ospf6 area <area> filter-list
vrouter running filter-list# input <string>
output¶
Filter networks sent from this area (prefix-list name).
vrouter running config# vrf <vrf> routing ospf6 area <area> filter-list
vrouter running filter-list# output <string>
range¶
Summarize routes matching address/mask (border routers only).
vrouter running config# vrf <vrf> routing ospf6 area <area>
vrouter running area <area># range <range> advertise true|false cost <uint32>
<range> |
An IPv6 prefix: address and CIDR mask. |
distance¶
OSPF administrative distance.
vrouter running config# vrf <vrf> routing ospf6 distance
all¶
Default OSPF administrative distance.
vrouter running config# vrf <vrf> routing ospf6 distance
vrouter running distance# all <uint8>
external¶
OSPF administrative distance for external routes.
vrouter running config# vrf <vrf> routing ospf6 distance
vrouter running distance# external <uint8>
inter-area¶
OSPF administrative distance for inter-area routes.
vrouter running config# vrf <vrf> routing ospf6 distance
vrouter running distance# inter-area <uint8>
intra-area¶
OSPF administrative distance for intra-area routes.
vrouter running config# vrf <vrf> routing ospf6 distance
vrouter running distance# intra-area <uint8>
interface¶
Enable routing on an IPv6 interface.
vrouter running config# vrf <vrf> routing ospf6
vrouter running ospf6# interface <interface> area AREA
<interface> |
An interface name. |
redistribute¶
Redistribute information from another routing protocol.
vrouter running config# vrf <vrf> routing ospf6
vrouter running ospf6# redistribute <redistribute> route-map <string>
|
Description |
---|---|
babel |
Babel routing protocol (Babel). |
bgp |
Border Gateway Protocol (BGP). |
connected |
Connected routes (directly attached subnet or host). |
kernel |
Kernel routes (not installed via the zebra RIB). |
ripng |
Routing Information Protocol next-generation (IPv6) (RIPng). |
static |
Statically configured routes. |
table |
Non-main Kernel Routing Table. |
timers¶
Adjust routing timers.
vrouter running config# vrf <vrf> routing ospf6 timers
lsa¶
Throttling link state advertisement delays.
vrouter running config# vrf <vrf> routing ospf6 timers lsa
min-arrival¶
Minimum delay in receiving new version of a LSA.
vrouter running config# vrf <vrf> routing ospf6 timers lsa
vrouter running lsa# min-arrival <uint32>
throttle¶
Throttling adaptive timer.
vrouter running config# vrf <vrf> routing ospf6 timers throttle
lsa¶
LSA delay (msec) between transmissions.
vrouter running config# vrf <vrf> routing ospf6 timers throttle
vrouter running throttle# lsa <uint16>
spf¶
OSPF SPF timers.
vrouter running config# vrf <vrf> routing ospf6 timers throttle spf
delay (mandatory)¶
Delay (msec) from first change received till SPF calculation.
vrouter running config# vrf <vrf> routing ospf6 timers throttle spf
vrouter running spf# delay <uint32>
init-hold-time (mandatory)¶
Initial hold time (msec) between consecutive SPF calculations.
vrouter running config# vrf <vrf> routing ospf6 timers throttle spf
vrouter running spf# init-hold-time <uint32>
max-hold-time (mandatory)¶
Maximum hold time (msec).
vrouter running config# vrf <vrf> routing ospf6 timers throttle spf
vrouter running spf# max-hold-time <uint32>