nhrp¶
Note
requires a Turbo Router Network License.
NHRP configuration.
vrouter running config# vrf <vrf> routing nhrp
enabled¶
Enable or disable NHRP.
vrouter running config# vrf <vrf> routing nhrp
vrouter running nhrp# enabled true|false
- Default value
true
hub-mode¶
Enable or disable the NHRP hub redirect capacity.
vrouter running config# vrf <vrf> routing nhrp
vrouter running nhrp# hub-mode true|false
- Default value
false
nhrp4-cache (state only)¶
Nexthop Cache Entry.
type (state only)¶
NHRP cache type.
vrouter> show state vrf <vrf> routing nhrp nhrp4-cache <string> <protocol> type
nbma (state only)¶
NBMA IP address.
vrouter> show state vrf <vrf> routing nhrp nhrp4-cache <string> <protocol> nbma
timeout (state only)¶
Tell if cache entry has timeout.
vrouter> show state vrf <vrf> routing nhrp nhrp4-cache <string> <protocol> timeout
auth (state only)¶
Tell if cache entry has authentication procedure.
vrouter> show state vrf <vrf> routing nhrp nhrp4-cache <string> <protocol> auth
used (state only)¶
Tell if cache entry is used.
vrouter> show state vrf <vrf> routing nhrp nhrp4-cache <string> <protocol> used
identity (state only)¶
Identity of the connection of the cache entry.
vrouter> show state vrf <vrf> routing nhrp nhrp4-cache <string> <protocol> identity
nhrp6-cache (state only)¶
Nexthop Cache Entry.
type (state only)¶
NHRP cache type.
vrouter> show state vrf <vrf> routing nhrp nhrp6-cache <string> <protocol> type
nbma (state only)¶
NBMA IP address.
vrouter> show state vrf <vrf> routing nhrp nhrp6-cache <string> <protocol> nbma
timeout (state only)¶
Tell if cache entry has timeout.
vrouter> show state vrf <vrf> routing nhrp nhrp6-cache <string> <protocol> timeout
auth (state only)¶
Tell if cache entry has authentication procedure.
vrouter> show state vrf <vrf> routing nhrp nhrp6-cache <string> <protocol> auth
used (state only)¶
Tell if cache entry is used.
vrouter> show state vrf <vrf> routing nhrp nhrp6-cache <string> <protocol> used
identity (state only)¶
Identity of the connection of the cache entry.
vrouter> show state vrf <vrf> routing nhrp nhrp6-cache <string> <protocol> identity
nhrp4-nhs (state only)¶
Nexthop Cache Entry.
fqdn (state only)¶
Fully Qualified Domain Name of Server.
vrouter> show state vrf <vrf> routing nhrp nhrp4-nhs <string> <nbma> fqdn
protocol (state only)¶
Protocol IPv4 Address.
vrouter> show state vrf <vrf> routing nhrp nhrp4-nhs <string> <nbma> protocol
nhrp6-nhs (state only)¶
Nexthop Cache Entry.
fqdn (state only)¶
Fully Qualified Domain Name of Server.
vrouter> show state vrf <vrf> routing nhrp nhrp6-nhs <string> <nbma> fqdn
protocol (state only)¶
Protocol IPv6 Address.
vrouter> show state vrf <vrf> routing nhrp nhrp6-nhs <string> <nbma> protocol
connection (state only)¶
NHRP Connection.
notifier-active (state only)¶
Whether the connection is active.
vrouter> show state vrf <vrf> routing nhrp connection <string> <string> notifier-active
sa-count (state only)¶
Number of child SAs for this connection.
vrouter> show state vrf <vrf> routing nhrp connection <string> <string> sa-count
identity (state only)¶
IKE remote identity of the connection.
vrouter> show state vrf <vrf> routing nhrp connection <string> <string> identity