ipv6 mangle

Packet alteration table.

vrouter running config# vrf <vrf> firewall ipv6 mangle

prerouting

Altering packets as soon as they come in.

vrouter running config# vrf <vrf> firewall ipv6 mangle prerouting

policy

Action when no rule match.

vrouter running config# vrf <vrf> firewall ipv6 mangle prerouting
vrouter running prerouting# policy POLICY

POLICY values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

Default value

accept

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle prerouting packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle prerouting bytes

rule

A rule to perform an action on matching packets.

vrouter running config# vrf <vrf> firewall ipv6 mangle prerouting
vrouter running prerouting# rule <uint64> description <string> \
...   protocol [not] VALUE \
...   destination \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   source \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   icmpv6-type [not] VALUE \
...   tcp-flags [not] set SET examined EXAMINED \
...   conntrack \
...     status [not] VALUE \
...     state [not] VALUE \
...   connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   limit burst <uint32> \
...     rate <uint32> UNIT \
...   dscp [not] VALUE \
...   tos [not] <0x0-0xff> mask <0x0-0xff> \
...   mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack \
...   shutdown shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf \
...   asconf-ack forward-tsn \
...     data examined EXAMINED set SET \
...     abort examined EXAMINED set SET \
...     shutdown-complete examined EXAMINED set SET \
...   inbound-interface [not] <string> \
...   rpfilter invert true|false \
...   action STANDARD chain <string> \
...     connmark \
...       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
...     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...     tcpmss set-mss <uint32> clamp-mss-to-pmtu

<uint64>

Priority of the rule. High number means lower priority.

description

A comment to describe the rule.

description <string>

protocol

Match the protocol.

protocol [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The protocol to match.

VALUE

VALUE values	Description
tcp	TCP protocol.
udp	UDP protocol.
sctp	SCTP protocol.
ipv6-icmp	ICMPv6 protocol.
esp	IPsec ESP protocol.
ah	IPsec AH protocol.
gre	GRE protocol.
l2tp	L2TP protocol.
ipip	IP-in-IP protocol.
vrrp	VRRP protocol.
all	All protocols.
<uint16>	Protocol from /etc/protocols.
<string>	Protocol from /etc/protocols.

destination

Match on destination fields.

destination \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on destination address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on destination port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on destination port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

source

Match on source fields.

source \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on source address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on source port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on source port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

icmpv6-type

Match the packet ICMP type.

icmpv6-type [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The ICMP type to match.

VALUE

VALUE values	Description
echo-request	Echo request.
echo-reply	Echo reply.
destination-unreachable	Destination unreachable.
address-unreachable	Address unreachable.
port-unreachable	Port unreachable.
no-route	No route to destination.
reject-route	Reject route to destination.
communication-prohibited	Communication with destination administratively prohibited.
beyond-scope	Beyond scope of source address.
packet-too-big	Packet too big.
failed-policy	Source address failed ingress/egress policy.
ttl-exceeded	TTL exceeded.
ttl-zero-during-transit	Hop limit exceeded in transit.
ttl-zero-during-reassembly	Fragment reassembly time exceeded.
parameter-problem	Parameter problem.
bad-header	Erroneous header field encountered.
unknown-header-type	Unrecognized Next Header type encountered.
unknown-option	Unrecognized IPv6 option encountered.
router-solicitation	Router solicitation.
router-advertisement	Router advertisement.
neighbor-solicitation	Neighbor solicitation.
neighbor-advertisement	Neighbor advertisement.
redirect	Redirect message.

tcp-flags

Match the packet TCP flags.

tcp-flags [not] set SET examined EXAMINED

not

Invert the match.

not

set

Set flags.

set SET

SET values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

conntrack

Match conntrack information.

conntrack \
     status [not] VALUE \
     state [not] VALUE

status

Match the connection status.

status [not] VALUE

not

Invert the match.

not

VALUE

The conntrack status to match.

VALUE

VALUE values	Description
none	No status.
expected	This is an expected connection (i.e. a conntrack helper set it up).
seen_reply	Conntrack has seen packets in both directions.
assured	Conntrack entry should never be early-expired.
confirmed	Connection is confirmed: originating packet has left box.

state

Match the packet state regarding conntrack.

state [not] VALUE

not

Invert the match.

not

VALUE

The packet states to match.

VALUE

VALUE values	Description
invalid	Packet is associated with no known connection.
new	Packet started new connection or associated with one which has not seen packets in both directions.
established	Packet is associated with a connection which has seen packets in both directions.
related	Packet is starting a new connection, but is associated with an existing connection, such as an FTP data transfer or an ICMP error.
untracked	Packet is not tracked at all, which happens if you explicitly untrack it by using the notrack action in the raw table.
snat	A virtual state, matching if the original source address differs from the reply destination.
dnat	A virtual state, matching if the original destination differs from the reply source.

connmark

Matches the mark field associated with a connection.

connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

limit

Matches packets at a limited rate. If not set, the rate value is 3/hour and the burst value is 5.

limit burst <uint32> \
     rate <uint32> UNIT

burst

Maximum initial number of packets to match. This number gets recharged by one every time the rate is not reached, up to this number.

burst <uint32>

rate

Matching rate, default unit is per hour.

rate <uint32> UNIT

<uint32> (mandatory)

The rate.

<uint32>

UNIT

Unit for rate.

UNIT

UNIT values	Description
second	Second.
minute	Minute.
hour	Hour.
day	Day.

dscp

Match the DSCP.

dscp [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The DSCP value to match.

VALUE

VALUE values	Description
<uint8>	A differentiated services code point (DSCP) marking within the IP header.
af11	AF11 (assured forwarding) class (10).
af12	AF12 (assured forwarding) class (12).
af13	AF13 (assured forwarding) class (14).
af21	AF21 (assured forwarding) class (18).
af22	AF22 (assured forwarding) class (20).
af23	AF23 (assured forwarding) class (22).
af31	AF31 (assured forwarding) class (26).
af32	AF32 (assured forwarding) class (28).
af33	AF33 (assured forwarding) class (30).
af41	AF41 (assured forwarding) class (34).
af42	AF42 (assured forwarding) class (36).
af43	AF43 (assured forwarding) class (38).
be	BE (best effort) class (0).
cs0	CS0 (class selector) class (0).
cs1	CS1 (class selector) class (8).
cs2	CS2 (class selector) class (16).
cs3	CS3 (class selector) class (24).
cs4	CS4 (class selector) class (32).
cs5	CS5 (class selector) class (40).
cs6	CS6 (class selector) class (48).
cs7	CS7 (class selector) class (56).
ef	EF (expedited forwarding) class (46).

tos

Match the tos.

tos [not] <0x0-0xff> mask <0x0-0xff>

not

Invert the match.

not

<0x0-0xff> (mandatory)

The tos value. Packets in connections are matched against this value.

<0x0-0xff>

mask

Logically ANDed with the tos before the comparison.

mask <0x0-0xff>

mark

Matches the mark field associated with a packet.

mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

sctp-chunk-types

This module matches Stream Control Transmission Protocol headers.

sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack shutdown \
   shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf asconf-ack \
   forward-tsn \
     data examined EXAMINED set SET \
     abort examined EXAMINED set SET \
     shutdown-complete examined EXAMINED set SET

not

Invert the match.

not

SCOPE (mandatory)

Invert the match.

SCOPE

SCOPE values	Description
all	Match all chunk types.
any	Match any chunk type.
only	Match exactly chunk type.

init

INIT chunk.

init

init-ack

INIT ACK chunk.

init-ack

sack

SACK chunk.

sack

heartbeat

HEARTBEAT chunk.

heartbeat

heartbeat-ack

HEARTBEAT ACK chunk.

heartbeat-ack

shutdown

SHUTDOWN chunk.

shutdown

shutdown-ack

SHUTDOWN ACK chunk.

shutdown-ack

error

ERROR chunk.

error

cookie-echo

COOKIE ECHO chunk.

cookie-echo

cookie-ack

COOKIE ACK chunk.

cookie-ack

ecn-ecne

ECN ECNE chunk.

ecn-ecne

ecn-cwr

ECN CWR chunk.

ecn-cwr

asconf

ASCONF chunk.

asconf

asconf-ack

ASCONF ACK chunk.

asconf-ack

forward-tsn

FORWARD TSN chunk.

forward-tsn

data

DATA chunk.

data examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

set

Set flags.

set SET

SET values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

abort

ABORT chunk.

abort examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

shutdown-complete

SHUTDOWN COMPLETE chunk.

shutdown-complete examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

inbound-interface

Name of an interface via which a packet was received. Only for input, forward and prerouting.

inbound-interface [not] <string>

not

Invert the match.

not

<string> (mandatory)

The interface to match.

<string>

rpfilter

Performs a reverse path filter test on a packet. If a reply to the packet would be sent via the same interface that the packet arrived on, the packet will match.

rpfilter invert true|false

invert

This will invert the sense of the match. Instead of matching packets that passed the reverse path filter test, match those that have failed it.

invert true|false

Default value

false

action

The action performed by this rule.

action STANDARD chain <string> \
     connmark \
       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     tcpmss set-mss <uint32> clamp-mss-to-pmtu

STANDARD

Standard action.

STANDARD

STANDARD values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

chain

Jump to the user chain by this name.

chain <string>

connmark

Sets the mark value associated with a connection. The mark is 32 bits wide.

connmark \
     set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

set-xmark

Zero out the bits given by mask and XOR value into the ctmark.

set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

XOR with this value.

<0x0-0xffffffff>

mask

Zero the bits given by this mask.

mask <0x0-0xffffffff>

save-mark

Copy the packet mark (nfmark) to the connection mark (ctmark) using the given masks. The new value is determined as follows: ctmark = (ctmark & ~ctmask) ^ (nfmark & nfmask) i.e. ctmask defines what bits to clear and nfmask what bits of the nfmark to XOR into the ctmark. ctmask and nfmask default to 0xFFFFFFFF.

save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be XORed into the connection mark.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be cleared.

ctmask <0x0-0xffffffff>

restore-mark

Copy the connection mark (ctmark) to the packet mark (nfmark) using the given masks. The new ctmark value is determined as follows: nfmark = (nfmark & ~nfmask) ^ (ctmark & ctmask) i.e. nfmask defines what bits to clear and ctmask what bits of the ctmark to XOR into the packet mark. ctmask and nfmask default to 0xFFFFFFFF. restore-mark is only valid in the mangle table.

restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be cleared.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be XORed into the packet mark.

ctmask <0x0-0xffffffff>

log

Turn on logging of matching packets.

log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS

level

Level of logging.

level LEVEL

LEVEL values	Description
emergency	Emergency level.
alert	Alert level.
critical	Critical level.
error	Error level.
warning	Warning level.
notice	Notice level.
info	Info level.
debug	Debug level.

prefix

Prefix log messages with the specified prefix, up to 29 letters long.

prefix <string>

additional-infos

Append additional informations to the logs.

additional-infos ADDITIONAL-INFOS

ADDITIONAL-INFOS values	Description
tcp-sequence	Log TCP sequence numbers.
tcp-options	Log options from the TCP packet header.
ip-options	Log options from the IP/IPv6 packet header.
user-id	Log the userid of the process which generated the packet.

mark

Used to set the mark value associated with the packet.

mark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

Bits that should be XORed into the packet mark.

<0x0-0xffffffff>

mask

Zero the bits given by this mask in the packet mark.

mask <0x0-0xffffffff>

tcpmss

Alters the MSS value of TCP SYN packets, to control the maximum size for that connection.

tcpmss set-mss <uint32> clamp-mss-to-pmtu

set-mss

Explicitly sets MSS option to specified value.

set-mss <uint32>

clamp-mss-to-pmtu

Automatically clamp MSS value to (path_MTU - 40 for IPv4, - 60 for IPv6).

clamp-mss-to-pmtu

counters (state only)

The counters of this rule.

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle prerouting rule <uint64> counters packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle prerouting rule <uint64> counters bytes

input

Altering packets before routing.

vrouter running config# vrf <vrf> firewall ipv6 mangle input

policy

Action when no rule match.

vrouter running config# vrf <vrf> firewall ipv6 mangle input
vrouter running input# policy POLICY

POLICY values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

Default value

accept

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle input packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle input bytes

rule

A rule to perform an action on matching packets.

vrouter running config# vrf <vrf> firewall ipv6 mangle input
vrouter running input# rule <uint64> description <string> \
...   protocol [not] VALUE \
...   destination \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   source \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   icmpv6-type [not] VALUE \
...   tcp-flags [not] set SET examined EXAMINED \
...   conntrack \
...     status [not] VALUE \
...     state [not] VALUE \
...   connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   limit burst <uint32> \
...     rate <uint32> UNIT \
...   dscp [not] VALUE \
...   tos [not] <0x0-0xff> mask <0x0-0xff> \
...   mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack \
...   shutdown shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf \
...   asconf-ack forward-tsn \
...     data examined EXAMINED set SET \
...     abort examined EXAMINED set SET \
...     shutdown-complete examined EXAMINED set SET \
...   inbound-interface [not] <string> \
...   action STANDARD chain <string> \
...     connmark \
...       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
...     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...     tcpmss set-mss <uint32> clamp-mss-to-pmtu

<uint64>

Priority of the rule. High number means lower priority.

description

A comment to describe the rule.

description <string>

protocol

Match the protocol.

protocol [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The protocol to match.

VALUE

VALUE values	Description
tcp	TCP protocol.
udp	UDP protocol.
sctp	SCTP protocol.
ipv6-icmp	ICMPv6 protocol.
esp	IPsec ESP protocol.
ah	IPsec AH protocol.
gre	GRE protocol.
l2tp	L2TP protocol.
ipip	IP-in-IP protocol.
vrrp	VRRP protocol.
all	All protocols.
<uint16>	Protocol from /etc/protocols.
<string>	Protocol from /etc/protocols.

destination

Match on destination fields.

destination \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on destination address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on destination port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on destination port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

source

Match on source fields.

source \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on source address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on source port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on source port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

icmpv6-type

Match the packet ICMP type.

icmpv6-type [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The ICMP type to match.

VALUE

VALUE values	Description
echo-request	Echo request.
echo-reply	Echo reply.
destination-unreachable	Destination unreachable.
address-unreachable	Address unreachable.
port-unreachable	Port unreachable.
no-route	No route to destination.
reject-route	Reject route to destination.
communication-prohibited	Communication with destination administratively prohibited.
beyond-scope	Beyond scope of source address.
packet-too-big	Packet too big.
failed-policy	Source address failed ingress/egress policy.
ttl-exceeded	TTL exceeded.
ttl-zero-during-transit	Hop limit exceeded in transit.
ttl-zero-during-reassembly	Fragment reassembly time exceeded.
parameter-problem	Parameter problem.
bad-header	Erroneous header field encountered.
unknown-header-type	Unrecognized Next Header type encountered.
unknown-option	Unrecognized IPv6 option encountered.
router-solicitation	Router solicitation.
router-advertisement	Router advertisement.
neighbor-solicitation	Neighbor solicitation.
neighbor-advertisement	Neighbor advertisement.
redirect	Redirect message.

tcp-flags

Match the packet TCP flags.

tcp-flags [not] set SET examined EXAMINED

not

Invert the match.

not

set

Set flags.

set SET

SET values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

conntrack

Match conntrack information.

conntrack \
     status [not] VALUE \
     state [not] VALUE

status

Match the connection status.

status [not] VALUE

not

Invert the match.

not

VALUE

The conntrack status to match.

VALUE

VALUE values	Description
none	No status.
expected	This is an expected connection (i.e. a conntrack helper set it up).
seen_reply	Conntrack has seen packets in both directions.
assured	Conntrack entry should never be early-expired.
confirmed	Connection is confirmed: originating packet has left box.

state

Match the packet state regarding conntrack.

state [not] VALUE

not

Invert the match.

not

VALUE

The packet states to match.

VALUE

VALUE values	Description
invalid	Packet is associated with no known connection.
new	Packet started new connection or associated with one which has not seen packets in both directions.
established	Packet is associated with a connection which has seen packets in both directions.
related	Packet is starting a new connection, but is associated with an existing connection, such as an FTP data transfer or an ICMP error.
untracked	Packet is not tracked at all, which happens if you explicitly untrack it by using the notrack action in the raw table.
snat	A virtual state, matching if the original source address differs from the reply destination.
dnat	A virtual state, matching if the original destination differs from the reply source.

connmark

Matches the mark field associated with a connection.

connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

limit

Matches packets at a limited rate. If not set, the rate value is 3/hour and the burst value is 5.

limit burst <uint32> \
     rate <uint32> UNIT

burst

Maximum initial number of packets to match. This number gets recharged by one every time the rate is not reached, up to this number.

burst <uint32>

rate

Matching rate, default unit is per hour.

rate <uint32> UNIT

<uint32> (mandatory)

The rate.

<uint32>

UNIT

Unit for rate.

UNIT

UNIT values	Description
second	Second.
minute	Minute.
hour	Hour.
day	Day.

dscp

Match the DSCP.

dscp [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The DSCP value to match.

VALUE

VALUE values	Description
<uint8>	A differentiated services code point (DSCP) marking within the IP header.
af11	AF11 (assured forwarding) class (10).
af12	AF12 (assured forwarding) class (12).
af13	AF13 (assured forwarding) class (14).
af21	AF21 (assured forwarding) class (18).
af22	AF22 (assured forwarding) class (20).
af23	AF23 (assured forwarding) class (22).
af31	AF31 (assured forwarding) class (26).
af32	AF32 (assured forwarding) class (28).
af33	AF33 (assured forwarding) class (30).
af41	AF41 (assured forwarding) class (34).
af42	AF42 (assured forwarding) class (36).
af43	AF43 (assured forwarding) class (38).
be	BE (best effort) class (0).
cs0	CS0 (class selector) class (0).
cs1	CS1 (class selector) class (8).
cs2	CS2 (class selector) class (16).
cs3	CS3 (class selector) class (24).
cs4	CS4 (class selector) class (32).
cs5	CS5 (class selector) class (40).
cs6	CS6 (class selector) class (48).
cs7	CS7 (class selector) class (56).
ef	EF (expedited forwarding) class (46).

tos

Match the tos.

tos [not] <0x0-0xff> mask <0x0-0xff>

not

Invert the match.

not

<0x0-0xff> (mandatory)

The tos value. Packets in connections are matched against this value.

<0x0-0xff>

mask

Logically ANDed with the tos before the comparison.

mask <0x0-0xff>

mark

Matches the mark field associated with a packet.

mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

sctp-chunk-types

This module matches Stream Control Transmission Protocol headers.

sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack shutdown \
   shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf asconf-ack \
   forward-tsn \
     data examined EXAMINED set SET \
     abort examined EXAMINED set SET \
     shutdown-complete examined EXAMINED set SET

not

Invert the match.

not

SCOPE (mandatory)

Invert the match.

SCOPE

SCOPE values	Description
all	Match all chunk types.
any	Match any chunk type.
only	Match exactly chunk type.

init

INIT chunk.

init

init-ack

INIT ACK chunk.

init-ack

sack

SACK chunk.

sack

heartbeat

HEARTBEAT chunk.

heartbeat

heartbeat-ack

HEARTBEAT ACK chunk.

heartbeat-ack

shutdown

SHUTDOWN chunk.

shutdown

shutdown-ack

SHUTDOWN ACK chunk.

shutdown-ack

error

ERROR chunk.

error

cookie-echo

COOKIE ECHO chunk.

cookie-echo

cookie-ack

COOKIE ACK chunk.

cookie-ack

ecn-ecne

ECN ECNE chunk.

ecn-ecne

ecn-cwr

ECN CWR chunk.

ecn-cwr

asconf

ASCONF chunk.

asconf

asconf-ack

ASCONF ACK chunk.

asconf-ack

forward-tsn

FORWARD TSN chunk.

forward-tsn

data

DATA chunk.

data examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

set

Set flags.

set SET

SET values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

abort

ABORT chunk.

abort examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

shutdown-complete

SHUTDOWN COMPLETE chunk.

shutdown-complete examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

inbound-interface

Name of an interface via which a packet was received. Only for input, forward and prerouting.

inbound-interface [not] <string>

not

Invert the match.

not

<string> (mandatory)

The interface to match.

<string>

action

The action performed by this rule.

action STANDARD chain <string> \
     connmark \
       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     tcpmss set-mss <uint32> clamp-mss-to-pmtu

STANDARD

Standard action.

STANDARD

STANDARD values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

chain

Jump to the user chain by this name.

chain <string>

connmark

Sets the mark value associated with a connection. The mark is 32 bits wide.

connmark \
     set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

set-xmark

Zero out the bits given by mask and XOR value into the ctmark.

set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

XOR with this value.

<0x0-0xffffffff>

mask

Zero the bits given by this mask.

mask <0x0-0xffffffff>

save-mark

Copy the packet mark (nfmark) to the connection mark (ctmark) using the given masks. The new value is determined as follows: ctmark = (ctmark & ~ctmask) ^ (nfmark & nfmask) i.e. ctmask defines what bits to clear and nfmask what bits of the nfmark to XOR into the ctmark. ctmask and nfmask default to 0xFFFFFFFF.

save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be XORed into the connection mark.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be cleared.

ctmask <0x0-0xffffffff>

restore-mark

Copy the connection mark (ctmark) to the packet mark (nfmark) using the given masks. The new ctmark value is determined as follows: nfmark = (nfmark & ~nfmask) ^ (ctmark & ctmask) i.e. nfmask defines what bits to clear and ctmask what bits of the ctmark to XOR into the packet mark. ctmask and nfmask default to 0xFFFFFFFF. restore-mark is only valid in the mangle table.

restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be cleared.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be XORed into the packet mark.

ctmask <0x0-0xffffffff>

log

Turn on logging of matching packets.

log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS

level

Level of logging.

level LEVEL

LEVEL values	Description
emergency	Emergency level.
alert	Alert level.
critical	Critical level.
error	Error level.
warning	Warning level.
notice	Notice level.
info	Info level.
debug	Debug level.

prefix

Prefix log messages with the specified prefix, up to 29 letters long.

prefix <string>

additional-infos

Append additional informations to the logs.

additional-infos ADDITIONAL-INFOS

ADDITIONAL-INFOS values	Description
tcp-sequence	Log TCP sequence numbers.
tcp-options	Log options from the TCP packet header.
ip-options	Log options from the IP/IPv6 packet header.
user-id	Log the userid of the process which generated the packet.

mark

Used to set the mark value associated with the packet.

mark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

Bits that should be XORed into the packet mark.

<0x0-0xffffffff>

mask

Zero the bits given by this mask in the packet mark.

mask <0x0-0xffffffff>

tcpmss

Alters the MSS value of TCP SYN packets, to control the maximum size for that connection.

tcpmss set-mss <uint32> clamp-mss-to-pmtu

set-mss

Explicitly sets MSS option to specified value.

set-mss <uint32>

clamp-mss-to-pmtu

Automatically clamp MSS value to (path_MTU - 40 for IPv4, - 60 for IPv6).

clamp-mss-to-pmtu

counters (state only)

The counters of this rule.

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle input rule <uint64> counters packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle input rule <uint64> counters bytes

forward

Altering packets being routed.

vrouter running config# vrf <vrf> firewall ipv6 mangle forward

policy

Action when no rule match.

vrouter running config# vrf <vrf> firewall ipv6 mangle forward
vrouter running forward# policy POLICY

POLICY values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

Default value

accept

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle forward packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle forward bytes

rule

A rule to perform an action on matching packets.

vrouter running config# vrf <vrf> firewall ipv6 mangle forward
vrouter running forward# rule <uint64> description <string> \
...   protocol [not] VALUE \
...   destination \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   source \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   icmpv6-type [not] VALUE \
...   tcp-flags [not] set SET examined EXAMINED \
...   conntrack \
...     status [not] VALUE \
...     state [not] VALUE \
...   connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   limit burst <uint32> \
...     rate <uint32> UNIT \
...   dscp [not] VALUE \
...   tos [not] <0x0-0xff> mask <0x0-0xff> \
...   mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack \
...   shutdown shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf \
...   asconf-ack forward-tsn \
...     data examined EXAMINED set SET \
...     abort examined EXAMINED set SET \
...     shutdown-complete examined EXAMINED set SET \
...   inbound-interface [not] <string> \
...   outbound-interface [not] <string> \
...   action STANDARD chain <string> \
...     connmark \
...       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
...     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...     tcpmss set-mss <uint32> clamp-mss-to-pmtu

<uint64>

Priority of the rule. High number means lower priority.

description

A comment to describe the rule.

description <string>

protocol

Match the protocol.

protocol [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The protocol to match.

VALUE

VALUE values	Description
tcp	TCP protocol.
udp	UDP protocol.
sctp	SCTP protocol.
ipv6-icmp	ICMPv6 protocol.
esp	IPsec ESP protocol.
ah	IPsec AH protocol.
gre	GRE protocol.
l2tp	L2TP protocol.
ipip	IP-in-IP protocol.
vrrp	VRRP protocol.
all	All protocols.
<uint16>	Protocol from /etc/protocols.
<string>	Protocol from /etc/protocols.

destination

Match on destination fields.

destination \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on destination address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on destination port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on destination port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

source

Match on source fields.

source \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on source address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on source port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on source port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

icmpv6-type

Match the packet ICMP type.

icmpv6-type [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The ICMP type to match.

VALUE

VALUE values	Description
echo-request	Echo request.
echo-reply	Echo reply.
destination-unreachable	Destination unreachable.
address-unreachable	Address unreachable.
port-unreachable	Port unreachable.
no-route	No route to destination.
reject-route	Reject route to destination.
communication-prohibited	Communication with destination administratively prohibited.
beyond-scope	Beyond scope of source address.
packet-too-big	Packet too big.
failed-policy	Source address failed ingress/egress policy.
ttl-exceeded	TTL exceeded.
ttl-zero-during-transit	Hop limit exceeded in transit.
ttl-zero-during-reassembly	Fragment reassembly time exceeded.
parameter-problem	Parameter problem.
bad-header	Erroneous header field encountered.
unknown-header-type	Unrecognized Next Header type encountered.
unknown-option	Unrecognized IPv6 option encountered.
router-solicitation	Router solicitation.
router-advertisement	Router advertisement.
neighbor-solicitation	Neighbor solicitation.
neighbor-advertisement	Neighbor advertisement.
redirect	Redirect message.

tcp-flags

Match the packet TCP flags.

tcp-flags [not] set SET examined EXAMINED

not

Invert the match.

not

set

Set flags.

set SET

SET values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

conntrack

Match conntrack information.

conntrack \
     status [not] VALUE \
     state [not] VALUE

status

Match the connection status.

status [not] VALUE

not

Invert the match.

not

VALUE

The conntrack status to match.

VALUE

VALUE values	Description
none	No status.
expected	This is an expected connection (i.e. a conntrack helper set it up).
seen_reply	Conntrack has seen packets in both directions.
assured	Conntrack entry should never be early-expired.
confirmed	Connection is confirmed: originating packet has left box.

state

Match the packet state regarding conntrack.

state [not] VALUE

not

Invert the match.

not

VALUE

The packet states to match.

VALUE

VALUE values	Description
invalid	Packet is associated with no known connection.
new	Packet started new connection or associated with one which has not seen packets in both directions.
established	Packet is associated with a connection which has seen packets in both directions.
related	Packet is starting a new connection, but is associated with an existing connection, such as an FTP data transfer or an ICMP error.
untracked	Packet is not tracked at all, which happens if you explicitly untrack it by using the notrack action in the raw table.
snat	A virtual state, matching if the original source address differs from the reply destination.
dnat	A virtual state, matching if the original destination differs from the reply source.

connmark

Matches the mark field associated with a connection.

connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

limit

Matches packets at a limited rate. If not set, the rate value is 3/hour and the burst value is 5.

limit burst <uint32> \
     rate <uint32> UNIT

burst

Maximum initial number of packets to match. This number gets recharged by one every time the rate is not reached, up to this number.

burst <uint32>

rate

Matching rate, default unit is per hour.

rate <uint32> UNIT

<uint32> (mandatory)

The rate.

<uint32>

UNIT

Unit for rate.

UNIT

UNIT values	Description
second	Second.
minute	Minute.
hour	Hour.
day	Day.

dscp

Match the DSCP.

dscp [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The DSCP value to match.

VALUE

VALUE values	Description
<uint8>	A differentiated services code point (DSCP) marking within the IP header.
af11	AF11 (assured forwarding) class (10).
af12	AF12 (assured forwarding) class (12).
af13	AF13 (assured forwarding) class (14).
af21	AF21 (assured forwarding) class (18).
af22	AF22 (assured forwarding) class (20).
af23	AF23 (assured forwarding) class (22).
af31	AF31 (assured forwarding) class (26).
af32	AF32 (assured forwarding) class (28).
af33	AF33 (assured forwarding) class (30).
af41	AF41 (assured forwarding) class (34).
af42	AF42 (assured forwarding) class (36).
af43	AF43 (assured forwarding) class (38).
be	BE (best effort) class (0).
cs0	CS0 (class selector) class (0).
cs1	CS1 (class selector) class (8).
cs2	CS2 (class selector) class (16).
cs3	CS3 (class selector) class (24).
cs4	CS4 (class selector) class (32).
cs5	CS5 (class selector) class (40).
cs6	CS6 (class selector) class (48).
cs7	CS7 (class selector) class (56).
ef	EF (expedited forwarding) class (46).

tos

Match the tos.

tos [not] <0x0-0xff> mask <0x0-0xff>

not

Invert the match.

not

<0x0-0xff> (mandatory)

The tos value. Packets in connections are matched against this value.

<0x0-0xff>

mask

Logically ANDed with the tos before the comparison.

mask <0x0-0xff>

mark

Matches the mark field associated with a packet.

mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

sctp-chunk-types

This module matches Stream Control Transmission Protocol headers.

sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack shutdown \
   shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf asconf-ack \
   forward-tsn \
     data examined EXAMINED set SET \
     abort examined EXAMINED set SET \
     shutdown-complete examined EXAMINED set SET

not

Invert the match.

not

SCOPE (mandatory)

Invert the match.

SCOPE

SCOPE values	Description
all	Match all chunk types.
any	Match any chunk type.
only	Match exactly chunk type.

init

INIT chunk.

init

init-ack

INIT ACK chunk.

init-ack

sack

SACK chunk.

sack

heartbeat

HEARTBEAT chunk.

heartbeat

heartbeat-ack

HEARTBEAT ACK chunk.

heartbeat-ack

shutdown

SHUTDOWN chunk.

shutdown

shutdown-ack

SHUTDOWN ACK chunk.

shutdown-ack

error

ERROR chunk.

error

cookie-echo

COOKIE ECHO chunk.

cookie-echo

cookie-ack

COOKIE ACK chunk.

cookie-ack

ecn-ecne

ECN ECNE chunk.

ecn-ecne

ecn-cwr

ECN CWR chunk.

ecn-cwr

asconf

ASCONF chunk.

asconf

asconf-ack

ASCONF ACK chunk.

asconf-ack

forward-tsn

FORWARD TSN chunk.

forward-tsn

data

DATA chunk.

data examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

set

Set flags.

set SET

SET values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

abort

ABORT chunk.

abort examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

shutdown-complete

SHUTDOWN COMPLETE chunk.

shutdown-complete examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

inbound-interface

Name of an interface via which a packet was received. Only for input, forward and prerouting.

inbound-interface [not] <string>

not

Invert the match.

not

<string> (mandatory)

The interface to match.

<string>

outbound-interface

Name of an interface via which a packet is going to be sent. Only for forward, output and postrouting.

outbound-interface [not] <string>

not

Invert the match.

not

<string> (mandatory)

The interface to match.

<string>

action

The action performed by this rule.

action STANDARD chain <string> \
     connmark \
       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     tcpmss set-mss <uint32> clamp-mss-to-pmtu

STANDARD

Standard action.

STANDARD

STANDARD values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

chain

Jump to the user chain by this name.

chain <string>

connmark

Sets the mark value associated with a connection. The mark is 32 bits wide.

connmark \
     set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

set-xmark

Zero out the bits given by mask and XOR value into the ctmark.

set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

XOR with this value.

<0x0-0xffffffff>

mask

Zero the bits given by this mask.

mask <0x0-0xffffffff>

save-mark

Copy the packet mark (nfmark) to the connection mark (ctmark) using the given masks. The new value is determined as follows: ctmark = (ctmark & ~ctmask) ^ (nfmark & nfmask) i.e. ctmask defines what bits to clear and nfmask what bits of the nfmark to XOR into the ctmark. ctmask and nfmask default to 0xFFFFFFFF.

save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be XORed into the connection mark.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be cleared.

ctmask <0x0-0xffffffff>

restore-mark

Copy the connection mark (ctmark) to the packet mark (nfmark) using the given masks. The new ctmark value is determined as follows: nfmark = (nfmark & ~nfmask) ^ (ctmark & ctmask) i.e. nfmask defines what bits to clear and ctmask what bits of the ctmark to XOR into the packet mark. ctmask and nfmask default to 0xFFFFFFFF. restore-mark is only valid in the mangle table.

restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be cleared.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be XORed into the packet mark.

ctmask <0x0-0xffffffff>

log

Turn on logging of matching packets.

log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS

level

Level of logging.

level LEVEL

LEVEL values	Description
emergency	Emergency level.
alert	Alert level.
critical	Critical level.
error	Error level.
warning	Warning level.
notice	Notice level.
info	Info level.
debug	Debug level.

prefix

Prefix log messages with the specified prefix, up to 29 letters long.

prefix <string>

additional-infos

Append additional informations to the logs.

additional-infos ADDITIONAL-INFOS

ADDITIONAL-INFOS values	Description
tcp-sequence	Log TCP sequence numbers.
tcp-options	Log options from the TCP packet header.
ip-options	Log options from the IP/IPv6 packet header.
user-id	Log the userid of the process which generated the packet.

mark

Used to set the mark value associated with the packet.

mark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

Bits that should be XORed into the packet mark.

<0x0-0xffffffff>

mask

Zero the bits given by this mask in the packet mark.

mask <0x0-0xffffffff>

tcpmss

Alters the MSS value of TCP SYN packets, to control the maximum size for that connection.

tcpmss set-mss <uint32> clamp-mss-to-pmtu

set-mss

Explicitly sets MSS option to specified value.

set-mss <uint32>

clamp-mss-to-pmtu

Automatically clamp MSS value to (path_MTU - 40 for IPv4, - 60 for IPv6).

clamp-mss-to-pmtu

counters (state only)

The counters of this rule.

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle forward rule <uint64> counters packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle forward rule <uint64> counters bytes

output

Altering locally-generated packets before routing.

vrouter running config# vrf <vrf> firewall ipv6 mangle output

policy

Action when no rule match.

vrouter running config# vrf <vrf> firewall ipv6 mangle output
vrouter running output# policy POLICY

POLICY values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

Default value

accept

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle output packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle output bytes

rule

A rule to perform an action on matching packets.

vrouter running config# vrf <vrf> firewall ipv6 mangle output
vrouter running output# rule <uint64> description <string> \
...   protocol [not] VALUE \
...   destination \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   source \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   icmpv6-type [not] VALUE \
...   tcp-flags [not] set SET examined EXAMINED \
...   conntrack \
...     status [not] VALUE \
...     state [not] VALUE \
...   connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   limit burst <uint32> \
...     rate <uint32> UNIT \
...   dscp [not] VALUE \
...   tos [not] <0x0-0xff> mask <0x0-0xff> \
...   mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack \
...   shutdown shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf \
...   asconf-ack forward-tsn \
...     data examined EXAMINED set SET \
...     abort examined EXAMINED set SET \
...     shutdown-complete examined EXAMINED set SET \
...   outbound-interface [not] <string> \
...   action STANDARD chain <string> \
...     connmark \
...       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
...     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...     tcpmss set-mss <uint32> clamp-mss-to-pmtu

<uint64>

Priority of the rule. High number means lower priority.

description

A comment to describe the rule.

description <string>

protocol

Match the protocol.

protocol [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The protocol to match.

VALUE

VALUE values	Description
tcp	TCP protocol.
udp	UDP protocol.
sctp	SCTP protocol.
ipv6-icmp	ICMPv6 protocol.
esp	IPsec ESP protocol.
ah	IPsec AH protocol.
gre	GRE protocol.
l2tp	L2TP protocol.
ipip	IP-in-IP protocol.
vrrp	VRRP protocol.
all	All protocols.
<uint16>	Protocol from /etc/protocols.
<string>	Protocol from /etc/protocols.

destination

Match on destination fields.

destination \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on destination address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on destination port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on destination port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

source

Match on source fields.

source \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on source address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on source port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on source port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

icmpv6-type

Match the packet ICMP type.

icmpv6-type [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The ICMP type to match.

VALUE

VALUE values	Description
echo-request	Echo request.
echo-reply	Echo reply.
destination-unreachable	Destination unreachable.
address-unreachable	Address unreachable.
port-unreachable	Port unreachable.
no-route	No route to destination.
reject-route	Reject route to destination.
communication-prohibited	Communication with destination administratively prohibited.
beyond-scope	Beyond scope of source address.
packet-too-big	Packet too big.
failed-policy	Source address failed ingress/egress policy.
ttl-exceeded	TTL exceeded.
ttl-zero-during-transit	Hop limit exceeded in transit.
ttl-zero-during-reassembly	Fragment reassembly time exceeded.
parameter-problem	Parameter problem.
bad-header	Erroneous header field encountered.
unknown-header-type	Unrecognized Next Header type encountered.
unknown-option	Unrecognized IPv6 option encountered.
router-solicitation	Router solicitation.
router-advertisement	Router advertisement.
neighbor-solicitation	Neighbor solicitation.
neighbor-advertisement	Neighbor advertisement.
redirect	Redirect message.

tcp-flags

Match the packet TCP flags.

tcp-flags [not] set SET examined EXAMINED

not

Invert the match.

not

set

Set flags.

set SET

SET values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

conntrack

Match conntrack information.

conntrack \
     status [not] VALUE \
     state [not] VALUE

status

Match the connection status.

status [not] VALUE

not

Invert the match.

not

VALUE

The conntrack status to match.

VALUE

VALUE values	Description
none	No status.
expected	This is an expected connection (i.e. a conntrack helper set it up).
seen_reply	Conntrack has seen packets in both directions.
assured	Conntrack entry should never be early-expired.
confirmed	Connection is confirmed: originating packet has left box.

state

Match the packet state regarding conntrack.

state [not] VALUE

not

Invert the match.

not

VALUE

The packet states to match.

VALUE

VALUE values	Description
invalid	Packet is associated with no known connection.
new	Packet started new connection or associated with one which has not seen packets in both directions.
established	Packet is associated with a connection which has seen packets in both directions.
related	Packet is starting a new connection, but is associated with an existing connection, such as an FTP data transfer or an ICMP error.
untracked	Packet is not tracked at all, which happens if you explicitly untrack it by using the notrack action in the raw table.
snat	A virtual state, matching if the original source address differs from the reply destination.
dnat	A virtual state, matching if the original destination differs from the reply source.

connmark

Matches the mark field associated with a connection.

connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

limit

Matches packets at a limited rate. If not set, the rate value is 3/hour and the burst value is 5.

limit burst <uint32> \
     rate <uint32> UNIT

burst

Maximum initial number of packets to match. This number gets recharged by one every time the rate is not reached, up to this number.

burst <uint32>

rate

Matching rate, default unit is per hour.

rate <uint32> UNIT

<uint32> (mandatory)

The rate.

<uint32>

UNIT

Unit for rate.

UNIT

UNIT values	Description
second	Second.
minute	Minute.
hour	Hour.
day	Day.

dscp

Match the DSCP.

dscp [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The DSCP value to match.

VALUE

VALUE values	Description
<uint8>	A differentiated services code point (DSCP) marking within the IP header.
af11	AF11 (assured forwarding) class (10).
af12	AF12 (assured forwarding) class (12).
af13	AF13 (assured forwarding) class (14).
af21	AF21 (assured forwarding) class (18).
af22	AF22 (assured forwarding) class (20).
af23	AF23 (assured forwarding) class (22).
af31	AF31 (assured forwarding) class (26).
af32	AF32 (assured forwarding) class (28).
af33	AF33 (assured forwarding) class (30).
af41	AF41 (assured forwarding) class (34).
af42	AF42 (assured forwarding) class (36).
af43	AF43 (assured forwarding) class (38).
be	BE (best effort) class (0).
cs0	CS0 (class selector) class (0).
cs1	CS1 (class selector) class (8).
cs2	CS2 (class selector) class (16).
cs3	CS3 (class selector) class (24).
cs4	CS4 (class selector) class (32).
cs5	CS5 (class selector) class (40).
cs6	CS6 (class selector) class (48).
cs7	CS7 (class selector) class (56).
ef	EF (expedited forwarding) class (46).

tos

Match the tos.

tos [not] <0x0-0xff> mask <0x0-0xff>

not

Invert the match.

not

<0x0-0xff> (mandatory)

The tos value. Packets in connections are matched against this value.

<0x0-0xff>

mask

Logically ANDed with the tos before the comparison.

mask <0x0-0xff>

mark

Matches the mark field associated with a packet.

mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

sctp-chunk-types

This module matches Stream Control Transmission Protocol headers.

sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack shutdown \
   shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf asconf-ack \
   forward-tsn \
     data examined EXAMINED set SET \
     abort examined EXAMINED set SET \
     shutdown-complete examined EXAMINED set SET

not

Invert the match.

not

SCOPE (mandatory)

Invert the match.

SCOPE

SCOPE values	Description
all	Match all chunk types.
any	Match any chunk type.
only	Match exactly chunk type.

init

INIT chunk.

init

init-ack

INIT ACK chunk.

init-ack

sack

SACK chunk.

sack

heartbeat

HEARTBEAT chunk.

heartbeat

heartbeat-ack

HEARTBEAT ACK chunk.

heartbeat-ack

shutdown

SHUTDOWN chunk.

shutdown

shutdown-ack

SHUTDOWN ACK chunk.

shutdown-ack

error

ERROR chunk.

error

cookie-echo

COOKIE ECHO chunk.

cookie-echo

cookie-ack

COOKIE ACK chunk.

cookie-ack

ecn-ecne

ECN ECNE chunk.

ecn-ecne

ecn-cwr

ECN CWR chunk.

ecn-cwr

asconf

ASCONF chunk.

asconf

asconf-ack

ASCONF ACK chunk.

asconf-ack

forward-tsn

FORWARD TSN chunk.

forward-tsn

data

DATA chunk.

data examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

set

Set flags.

set SET

SET values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

abort

ABORT chunk.

abort examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

shutdown-complete

SHUTDOWN COMPLETE chunk.

shutdown-complete examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

outbound-interface

Name of an interface via which a packet is going to be sent. Only for forward, output and postrouting.

outbound-interface [not] <string>

not

Invert the match.

not

<string> (mandatory)

The interface to match.

<string>

action

The action performed by this rule.

action STANDARD chain <string> \
     connmark \
       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     tcpmss set-mss <uint32> clamp-mss-to-pmtu

STANDARD

Standard action.

STANDARD

STANDARD values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

chain

Jump to the user chain by this name.

chain <string>

connmark

Sets the mark value associated with a connection. The mark is 32 bits wide.

connmark \
     set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

set-xmark

Zero out the bits given by mask and XOR value into the ctmark.

set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

XOR with this value.

<0x0-0xffffffff>

mask

Zero the bits given by this mask.

mask <0x0-0xffffffff>

save-mark

Copy the packet mark (nfmark) to the connection mark (ctmark) using the given masks. The new value is determined as follows: ctmark = (ctmark & ~ctmask) ^ (nfmark & nfmask) i.e. ctmask defines what bits to clear and nfmask what bits of the nfmark to XOR into the ctmark. ctmask and nfmask default to 0xFFFFFFFF.

save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be XORed into the connection mark.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be cleared.

ctmask <0x0-0xffffffff>

restore-mark

Copy the connection mark (ctmark) to the packet mark (nfmark) using the given masks. The new ctmark value is determined as follows: nfmark = (nfmark & ~nfmask) ^ (ctmark & ctmask) i.e. nfmask defines what bits to clear and ctmask what bits of the ctmark to XOR into the packet mark. ctmask and nfmask default to 0xFFFFFFFF. restore-mark is only valid in the mangle table.

restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be cleared.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be XORed into the packet mark.

ctmask <0x0-0xffffffff>

log

Turn on logging of matching packets.

log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS

level

Level of logging.

level LEVEL

LEVEL values	Description
emergency	Emergency level.
alert	Alert level.
critical	Critical level.
error	Error level.
warning	Warning level.
notice	Notice level.
info	Info level.
debug	Debug level.

prefix

Prefix log messages with the specified prefix, up to 29 letters long.

prefix <string>

additional-infos

Append additional informations to the logs.

additional-infos ADDITIONAL-INFOS

ADDITIONAL-INFOS values	Description
tcp-sequence	Log TCP sequence numbers.
tcp-options	Log options from the TCP packet header.
ip-options	Log options from the IP/IPv6 packet header.
user-id	Log the userid of the process which generated the packet.

mark

Used to set the mark value associated with the packet.

mark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

Bits that should be XORed into the packet mark.

<0x0-0xffffffff>

mask

Zero the bits given by this mask in the packet mark.

mask <0x0-0xffffffff>

tcpmss

Alters the MSS value of TCP SYN packets, to control the maximum size for that connection.

tcpmss set-mss <uint32> clamp-mss-to-pmtu

set-mss

Explicitly sets MSS option to specified value.

set-mss <uint32>

clamp-mss-to-pmtu

Automatically clamp MSS value to (path_MTU - 40 for IPv4, - 60 for IPv6).

clamp-mss-to-pmtu

counters (state only)

The counters of this rule.

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle output rule <uint64> counters packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle output rule <uint64> counters bytes

postrouting

Altering packets as they are about to go.

vrouter running config# vrf <vrf> firewall ipv6 mangle postrouting

policy

Action when no rule match.

vrouter running config# vrf <vrf> firewall ipv6 mangle postrouting
vrouter running postrouting# policy POLICY

POLICY values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

Default value

accept

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle postrouting packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle postrouting bytes

rule

A rule to perform an action on matching packets.

vrouter running config# vrf <vrf> firewall ipv6 mangle postrouting
vrouter running postrouting# rule <uint64> description <string> \
...   protocol [not] VALUE \
...   destination \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   source \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   icmpv6-type [not] VALUE \
...   tcp-flags [not] set SET examined EXAMINED \
...   conntrack \
...     status [not] VALUE \
...     state [not] VALUE \
...   connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   limit burst <uint32> \
...     rate <uint32> UNIT \
...   dscp [not] VALUE \
...   tos [not] <0x0-0xff> mask <0x0-0xff> \
...   mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack \
...   shutdown shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf \
...   asconf-ack forward-tsn \
...     data examined EXAMINED set SET \
...     abort examined EXAMINED set SET \
...     shutdown-complete examined EXAMINED set SET \
...   outbound-interface [not] <string> \
...   action STANDARD chain <string> \
...     connmark \
...       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
...     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...     tcpmss set-mss <uint32> clamp-mss-to-pmtu

<uint64>

Priority of the rule. High number means lower priority.

description

A comment to describe the rule.

description <string>

protocol

Match the protocol.

protocol [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The protocol to match.

VALUE

VALUE values	Description
tcp	TCP protocol.
udp	UDP protocol.
sctp	SCTP protocol.
ipv6-icmp	ICMPv6 protocol.
esp	IPsec ESP protocol.
ah	IPsec AH protocol.
gre	GRE protocol.
l2tp	L2TP protocol.
ipip	IP-in-IP protocol.
vrrp	VRRP protocol.
all	All protocols.
<uint16>	Protocol from /etc/protocols.
<string>	Protocol from /etc/protocols.

destination

Match on destination fields.

destination \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on destination address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on destination port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on destination port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

source

Match on source fields.

source \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on source address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on source port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on source port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

icmpv6-type

Match the packet ICMP type.

icmpv6-type [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The ICMP type to match.

VALUE

VALUE values	Description
echo-request	Echo request.
echo-reply	Echo reply.
destination-unreachable	Destination unreachable.
address-unreachable	Address unreachable.
port-unreachable	Port unreachable.
no-route	No route to destination.
reject-route	Reject route to destination.
communication-prohibited	Communication with destination administratively prohibited.
beyond-scope	Beyond scope of source address.
packet-too-big	Packet too big.
failed-policy	Source address failed ingress/egress policy.
ttl-exceeded	TTL exceeded.
ttl-zero-during-transit	Hop limit exceeded in transit.
ttl-zero-during-reassembly	Fragment reassembly time exceeded.
parameter-problem	Parameter problem.
bad-header	Erroneous header field encountered.
unknown-header-type	Unrecognized Next Header type encountered.
unknown-option	Unrecognized IPv6 option encountered.
router-solicitation	Router solicitation.
router-advertisement	Router advertisement.
neighbor-solicitation	Neighbor solicitation.
neighbor-advertisement	Neighbor advertisement.
redirect	Redirect message.

tcp-flags

Match the packet TCP flags.

tcp-flags [not] set SET examined EXAMINED

not

Invert the match.

not

set

Set flags.

set SET

SET values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

conntrack

Match conntrack information.

conntrack \
     status [not] VALUE \
     state [not] VALUE

status

Match the connection status.

status [not] VALUE

not

Invert the match.

not

VALUE

The conntrack status to match.

VALUE

VALUE values	Description
none	No status.
expected	This is an expected connection (i.e. a conntrack helper set it up).
seen_reply	Conntrack has seen packets in both directions.
assured	Conntrack entry should never be early-expired.
confirmed	Connection is confirmed: originating packet has left box.

state

Match the packet state regarding conntrack.

state [not] VALUE

not

Invert the match.

not

VALUE

The packet states to match.

VALUE

VALUE values	Description
invalid	Packet is associated with no known connection.
new	Packet started new connection or associated with one which has not seen packets in both directions.
established	Packet is associated with a connection which has seen packets in both directions.
related	Packet is starting a new connection, but is associated with an existing connection, such as an FTP data transfer or an ICMP error.
untracked	Packet is not tracked at all, which happens if you explicitly untrack it by using the notrack action in the raw table.
snat	A virtual state, matching if the original source address differs from the reply destination.
dnat	A virtual state, matching if the original destination differs from the reply source.

connmark

Matches the mark field associated with a connection.

connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

limit

Matches packets at a limited rate. If not set, the rate value is 3/hour and the burst value is 5.

limit burst <uint32> \
     rate <uint32> UNIT

burst

Maximum initial number of packets to match. This number gets recharged by one every time the rate is not reached, up to this number.

burst <uint32>

rate

Matching rate, default unit is per hour.

rate <uint32> UNIT

<uint32> (mandatory)

The rate.

<uint32>

UNIT

Unit for rate.

UNIT

UNIT values	Description
second	Second.
minute	Minute.
hour	Hour.
day	Day.

dscp

Match the DSCP.

dscp [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The DSCP value to match.

VALUE

VALUE values	Description
<uint8>	A differentiated services code point (DSCP) marking within the IP header.
af11	AF11 (assured forwarding) class (10).
af12	AF12 (assured forwarding) class (12).
af13	AF13 (assured forwarding) class (14).
af21	AF21 (assured forwarding) class (18).
af22	AF22 (assured forwarding) class (20).
af23	AF23 (assured forwarding) class (22).
af31	AF31 (assured forwarding) class (26).
af32	AF32 (assured forwarding) class (28).
af33	AF33 (assured forwarding) class (30).
af41	AF41 (assured forwarding) class (34).
af42	AF42 (assured forwarding) class (36).
af43	AF43 (assured forwarding) class (38).
be	BE (best effort) class (0).
cs0	CS0 (class selector) class (0).
cs1	CS1 (class selector) class (8).
cs2	CS2 (class selector) class (16).
cs3	CS3 (class selector) class (24).
cs4	CS4 (class selector) class (32).
cs5	CS5 (class selector) class (40).
cs6	CS6 (class selector) class (48).
cs7	CS7 (class selector) class (56).
ef	EF (expedited forwarding) class (46).

tos

Match the tos.

tos [not] <0x0-0xff> mask <0x0-0xff>

not

Invert the match.

not

<0x0-0xff> (mandatory)

The tos value. Packets in connections are matched against this value.

<0x0-0xff>

mask

Logically ANDed with the tos before the comparison.

mask <0x0-0xff>

mark

Matches the mark field associated with a packet.

mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

sctp-chunk-types

This module matches Stream Control Transmission Protocol headers.

sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack shutdown \
   shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf asconf-ack \
   forward-tsn \
     data examined EXAMINED set SET \
     abort examined EXAMINED set SET \
     shutdown-complete examined EXAMINED set SET

not

Invert the match.

not

SCOPE (mandatory)

Invert the match.

SCOPE

SCOPE values	Description
all	Match all chunk types.
any	Match any chunk type.
only	Match exactly chunk type.

init

INIT chunk.

init

init-ack

INIT ACK chunk.

init-ack

sack

SACK chunk.

sack

heartbeat

HEARTBEAT chunk.

heartbeat

heartbeat-ack

HEARTBEAT ACK chunk.

heartbeat-ack

shutdown

SHUTDOWN chunk.

shutdown

shutdown-ack

SHUTDOWN ACK chunk.

shutdown-ack

error

ERROR chunk.

error

cookie-echo

COOKIE ECHO chunk.

cookie-echo

cookie-ack

COOKIE ACK chunk.

cookie-ack

ecn-ecne

ECN ECNE chunk.

ecn-ecne

ecn-cwr

ECN CWR chunk.

ecn-cwr

asconf

ASCONF chunk.

asconf

asconf-ack

ASCONF ACK chunk.

asconf-ack

forward-tsn

FORWARD TSN chunk.

forward-tsn

data

DATA chunk.

data examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

set

Set flags.

set SET

SET values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

abort

ABORT chunk.

abort examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

shutdown-complete

SHUTDOWN COMPLETE chunk.

shutdown-complete examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

outbound-interface

Name of an interface via which a packet is going to be sent. Only for forward, output and postrouting.

outbound-interface [not] <string>

not

Invert the match.

not

<string> (mandatory)

The interface to match.

<string>

action

The action performed by this rule.

action STANDARD chain <string> \
     connmark \
       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     tcpmss set-mss <uint32> clamp-mss-to-pmtu

STANDARD

Standard action.

STANDARD

STANDARD values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

chain

Jump to the user chain by this name.

chain <string>

connmark

Sets the mark value associated with a connection. The mark is 32 bits wide.

connmark \
     set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

set-xmark

Zero out the bits given by mask and XOR value into the ctmark.

set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

XOR with this value.

<0x0-0xffffffff>

mask

Zero the bits given by this mask.

mask <0x0-0xffffffff>

save-mark

Copy the packet mark (nfmark) to the connection mark (ctmark) using the given masks. The new value is determined as follows: ctmark = (ctmark & ~ctmask) ^ (nfmark & nfmask) i.e. ctmask defines what bits to clear and nfmask what bits of the nfmark to XOR into the ctmark. ctmask and nfmask default to 0xFFFFFFFF.

save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be XORed into the connection mark.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be cleared.

ctmask <0x0-0xffffffff>

restore-mark

Copy the connection mark (ctmark) to the packet mark (nfmark) using the given masks. The new ctmark value is determined as follows: nfmark = (nfmark & ~nfmask) ^ (ctmark & ctmask) i.e. nfmask defines what bits to clear and ctmask what bits of the ctmark to XOR into the packet mark. ctmask and nfmask default to 0xFFFFFFFF. restore-mark is only valid in the mangle table.

restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be cleared.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be XORed into the packet mark.

ctmask <0x0-0xffffffff>

log

Turn on logging of matching packets.

log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS

level

Level of logging.

level LEVEL

LEVEL values	Description
emergency	Emergency level.
alert	Alert level.
critical	Critical level.
error	Error level.
warning	Warning level.
notice	Notice level.
info	Info level.
debug	Debug level.

prefix

Prefix log messages with the specified prefix, up to 29 letters long.

prefix <string>

additional-infos

Append additional informations to the logs.

additional-infos ADDITIONAL-INFOS

ADDITIONAL-INFOS values	Description
tcp-sequence	Log TCP sequence numbers.
tcp-options	Log options from the TCP packet header.
ip-options	Log options from the IP/IPv6 packet header.
user-id	Log the userid of the process which generated the packet.

mark

Used to set the mark value associated with the packet.

mark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

Bits that should be XORed into the packet mark.

<0x0-0xffffffff>

mask

Zero the bits given by this mask in the packet mark.

mask <0x0-0xffffffff>

tcpmss

Alters the MSS value of TCP SYN packets, to control the maximum size for that connection.

tcpmss set-mss <uint32> clamp-mss-to-pmtu

set-mss

Explicitly sets MSS option to specified value.

set-mss <uint32>

clamp-mss-to-pmtu

Automatically clamp MSS value to (path_MTU - 40 for IPv4, - 60 for IPv6).

clamp-mss-to-pmtu

counters (state only)

The counters of this rule.

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle postrouting rule <uint64> counters packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle postrouting rule <uint64> counters bytes

chain

User chain.

vrouter running config# vrf <vrf> firewall ipv6 mangle chain <string>

<string>

The user chain name.

policy

Action when no rule match.

vrouter running config# vrf <vrf> firewall ipv6 mangle chain <string>
vrouter running chain <string># policy POLICY

POLICY values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

Default value

accept

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle chain <string> packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle chain <string> bytes

rule

A rule to perform an action on matching packets.

vrouter running config# vrf <vrf> firewall ipv6 mangle chain <string>
vrouter running chain <string># rule <uint64> description <string> \
...   protocol [not] VALUE \
...   destination \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   source \
...     address [not] VALUE \
...     port [not] VALUE \
...     port-range [not] VALUE \
...     group [not] <string> \
...   icmpv6-type [not] VALUE \
...   tcp-flags [not] set SET examined EXAMINED \
...   conntrack \
...     status [not] VALUE \
...     state [not] VALUE \
...   connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   limit burst <uint32> \
...     rate <uint32> UNIT \
...   dscp [not] VALUE \
...   tos [not] <0x0-0xff> mask <0x0-0xff> \
...   mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff> \
...   sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack \
...   shutdown shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf \
...   asconf-ack forward-tsn \
...     data examined EXAMINED set SET \
...     abort examined EXAMINED set SET \
...     shutdown-complete examined EXAMINED set SET \
...   inbound-interface [not] <string> \
...   outbound-interface [not] <string> \
...   rpfilter invert true|false \
...   action STANDARD chain <string> reject REJECT \
...     connmark \
...       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
...     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
...     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
...     tcpmss set-mss <uint32> clamp-mss-to-pmtu

<uint64>

Priority of the rule. High number means lower priority.

description

A comment to describe the rule.

description <string>

protocol

Match the protocol.

protocol [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The protocol to match.

VALUE

VALUE values	Description
tcp	TCP protocol.
udp	UDP protocol.
sctp	SCTP protocol.
ipv6-icmp	ICMPv6 protocol.
esp	IPsec ESP protocol.
ah	IPsec AH protocol.
gre	GRE protocol.
l2tp	L2TP protocol.
ipip	IP-in-IP protocol.
vrrp	VRRP protocol.
all	All protocols.
<uint16>	Protocol from /etc/protocols.
<string>	Protocol from /etc/protocols.

destination

Match on destination fields.

destination \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on destination address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on destination port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on destination port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

source

Match on source fields.

source \
     address [not] VALUE \
     port [not] VALUE \
     port-range [not] VALUE \
     group [not] <string>

address

Match on source address.

address [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The address to match.

VALUE

VALUE values	Description
<domain-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

port

Match on source port.

port [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The port to match.

VALUE

VALUE

A 16-bit port number used by a transport protocol such as TCP or UDP.

port-range

Match on source port range (syntax: port[,port|,port-port]).

port-range [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

Port range, syntax is port[,port|,port-port].

VALUE

VALUE

A comma-separated list of ports or ports ranges. Examples: ‘21,22,1024-2048’.

group

Matches a set of addresses or networks.

group [not] <string>

not

Not match-set.

not

<string> (mandatory)

The name of the group.

<string>

icmpv6-type

Match the packet ICMP type.

icmpv6-type [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The ICMP type to match.

VALUE

VALUE values	Description
echo-request	Echo request.
echo-reply	Echo reply.
destination-unreachable	Destination unreachable.
address-unreachable	Address unreachable.
port-unreachable	Port unreachable.
no-route	No route to destination.
reject-route	Reject route to destination.
communication-prohibited	Communication with destination administratively prohibited.
beyond-scope	Beyond scope of source address.
packet-too-big	Packet too big.
failed-policy	Source address failed ingress/egress policy.
ttl-exceeded	TTL exceeded.
ttl-zero-during-transit	Hop limit exceeded in transit.
ttl-zero-during-reassembly	Fragment reassembly time exceeded.
parameter-problem	Parameter problem.
bad-header	Erroneous header field encountered.
unknown-header-type	Unrecognized Next Header type encountered.
unknown-option	Unrecognized IPv6 option encountered.
router-solicitation	Router solicitation.
router-advertisement	Router advertisement.
neighbor-solicitation	Neighbor solicitation.
neighbor-advertisement	Neighbor advertisement.
redirect	Redirect message.

tcp-flags

Match the packet TCP flags.

tcp-flags [not] set SET examined EXAMINED

not

Invert the match.

not

set

Set flags.

set SET

SET values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
syn	SYN flag.
ack	ACK flag.
fin	FIN flag.
rst	RST flag.
urg	URG flag.
psh	PSH flag.
all	All flags.
none	No flag.

conntrack

Match conntrack information.

conntrack \
     status [not] VALUE \
     state [not] VALUE

status

Match the connection status.

status [not] VALUE

not

Invert the match.

not

VALUE

The conntrack status to match.

VALUE

VALUE values	Description
none	No status.
expected	This is an expected connection (i.e. a conntrack helper set it up).
seen_reply	Conntrack has seen packets in both directions.
assured	Conntrack entry should never be early-expired.
confirmed	Connection is confirmed: originating packet has left box.

state

Match the packet state regarding conntrack.

state [not] VALUE

not

Invert the match.

not

VALUE

The packet states to match.

VALUE

VALUE values	Description
invalid	Packet is associated with no known connection.
new	Packet started new connection or associated with one which has not seen packets in both directions.
established	Packet is associated with a connection which has seen packets in both directions.
related	Packet is starting a new connection, but is associated with an existing connection, such as an FTP data transfer or an ICMP error.
untracked	Packet is not tracked at all, which happens if you explicitly untrack it by using the notrack action in the raw table.
snat	A virtual state, matching if the original source address differs from the reply destination.
dnat	A virtual state, matching if the original destination differs from the reply source.

connmark

Matches the mark field associated with a connection.

connmark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

limit

Matches packets at a limited rate. If not set, the rate value is 3/hour and the burst value is 5.

limit burst <uint32> \
     rate <uint32> UNIT

burst

Maximum initial number of packets to match. This number gets recharged by one every time the rate is not reached, up to this number.

burst <uint32>

rate

Matching rate, default unit is per hour.

rate <uint32> UNIT

<uint32> (mandatory)

The rate.

<uint32>

UNIT

Unit for rate.

UNIT

UNIT values	Description
second	Second.
minute	Minute.
hour	Hour.
day	Day.

dscp

Match the DSCP.

dscp [not] VALUE

not

Invert the match.

not

VALUE (mandatory)

The DSCP value to match.

VALUE

VALUE values	Description
<uint8>	A differentiated services code point (DSCP) marking within the IP header.
af11	AF11 (assured forwarding) class (10).
af12	AF12 (assured forwarding) class (12).
af13	AF13 (assured forwarding) class (14).
af21	AF21 (assured forwarding) class (18).
af22	AF22 (assured forwarding) class (20).
af23	AF23 (assured forwarding) class (22).
af31	AF31 (assured forwarding) class (26).
af32	AF32 (assured forwarding) class (28).
af33	AF33 (assured forwarding) class (30).
af41	AF41 (assured forwarding) class (34).
af42	AF42 (assured forwarding) class (36).
af43	AF43 (assured forwarding) class (38).
be	BE (best effort) class (0).
cs0	CS0 (class selector) class (0).
cs1	CS1 (class selector) class (8).
cs2	CS2 (class selector) class (16).
cs3	CS3 (class selector) class (24).
cs4	CS4 (class selector) class (32).
cs5	CS5 (class selector) class (40).
cs6	CS6 (class selector) class (48).
cs7	CS7 (class selector) class (56).
ef	EF (expedited forwarding) class (46).

tos

Match the tos.

tos [not] <0x0-0xff> mask <0x0-0xff>

not

Invert the match.

not

<0x0-0xff> (mandatory)

The tos value. Packets in connections are matched against this value.

<0x0-0xff>

mask

Logically ANDed with the tos before the comparison.

mask <0x0-0xff>

mark

Matches the mark field associated with a packet.

mark [not] <0x0-0xffffffff> mask <0x0-0xffffffff>

not

Invert the match.

not

<0x0-0xffffffff> (mandatory)

The mark value. Packets in connections are matched against this value.

<0x0-0xffffffff>

mask

Logically ANDed with the mark before the comparison.

mask <0x0-0xffffffff>

sctp-chunk-types

This module matches Stream Control Transmission Protocol headers.

sctp-chunk-types [not] SCOPE init init-ack sack heartbeat heartbeat-ack shutdown \
   shutdown-ack error cookie-echo cookie-ack ecn-ecne ecn-cwr asconf asconf-ack \
   forward-tsn \
     data examined EXAMINED set SET \
     abort examined EXAMINED set SET \
     shutdown-complete examined EXAMINED set SET

not

Invert the match.

not

SCOPE (mandatory)

Invert the match.

SCOPE

SCOPE values	Description
all	Match all chunk types.
any	Match any chunk type.
only	Match exactly chunk type.

init

INIT chunk.

init

init-ack

INIT ACK chunk.

init-ack

sack

SACK chunk.

sack

heartbeat

HEARTBEAT chunk.

heartbeat

heartbeat-ack

HEARTBEAT ACK chunk.

heartbeat-ack

shutdown

SHUTDOWN chunk.

shutdown

shutdown-ack

SHUTDOWN ACK chunk.

shutdown-ack

error

ERROR chunk.

error

cookie-echo

COOKIE ECHO chunk.

cookie-echo

cookie-ack

COOKIE ACK chunk.

cookie-ack

ecn-ecne

ECN ECNE chunk.

ecn-ecne

ecn-cwr

ECN CWR chunk.

ecn-cwr

asconf

ASCONF chunk.

asconf

asconf-ack

ASCONF ACK chunk.

asconf-ack

forward-tsn

FORWARD TSN chunk.

forward-tsn

data

DATA chunk.

data examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

set

Set flags.

set SET

SET values	Description
I	SACK chunk should be sent back without delay.
U	Indicates this data is an unordered chunk and the stream sequence number is invalid. If an unordered chunk is fragmented then each fragment has this flag set.
B	Marks the beginning fragment. An unfragmented chunk has this flag set.
E	Marks the end fragment. An unfragmented chunk has this flag set.

abort

ABORT chunk.

abort examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

shutdown-complete

SHUTDOWN COMPLETE chunk.

shutdown-complete examined EXAMINED set SET

examined

Examined flags.

examined EXAMINED

EXAMINED

Means the sender sent its own Verification Tag (that receiver should check).

set

Set flags.

set SET

SET	Means the sender sent its own Verification Tag (that receiver should check).

inbound-interface

Name of an interface via which a packet was received. Only for input, forward and prerouting.

inbound-interface [not] <string>

not

Invert the match.

not

<string> (mandatory)

The interface to match.

<string>

outbound-interface

Name of an interface via which a packet is going to be sent. Only for forward, output and postrouting.

outbound-interface [not] <string>

not

Invert the match.

not

<string> (mandatory)

The interface to match.

<string>

rpfilter

Performs a reverse path filter test on a packet. If a reply to the packet would be sent via the same interface that the packet arrived on, the packet will match.

rpfilter invert true|false

invert

This will invert the sense of the match. Instead of matching packets that passed the reverse path filter test, match those that have failed it.

invert true|false

Default value

false

action

The action performed by this rule.

action STANDARD chain <string> reject REJECT \
     connmark \
       set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
       save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
       restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS \
     mark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     tcpmss set-mss <uint32> clamp-mss-to-pmtu

STANDARD

Standard action.

STANDARD

STANDARD values	Description
accept	Let the packet through.
drop	Drop the packet.
return	Stop traversing this chain and resume at the next rule in the parent chain. For built-ins, go through the policy.

chain

Jump to the user chain by this name.

chain <string>

reject

Used to send back an error packet in response to the matched packet.

reject REJECT

REJECT values	Description
icmp6-no-route	Reject with ICMPv6 no route.
icmp6-adm-prohibited	Reject with ICMPv6 admin prohibited.
icmp6-addr-unreachable	Reject with ICMPv6 address unreachable.
icmp6-port-unreachable	Reject with ICMPv6 port unreachable.
tcp-reset	Reject with TCP RST packet. Can be used on rules which only match the TCP protocol.

connmark

Sets the mark value associated with a connection. The mark is 32 bits wide.

connmark \
     set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff> \
     save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff> \
     restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

set-xmark

Zero out the bits given by mask and XOR value into the ctmark.

set-xmark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

XOR with this value.

<0x0-0xffffffff>

mask

Zero the bits given by this mask.

mask <0x0-0xffffffff>

save-mark

Copy the packet mark (nfmark) to the connection mark (ctmark) using the given masks. The new value is determined as follows: ctmark = (ctmark & ~ctmask) ^ (nfmark & nfmask) i.e. ctmask defines what bits to clear and nfmask what bits of the nfmark to XOR into the ctmark. ctmask and nfmask default to 0xFFFFFFFF.

save-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be XORed into the connection mark.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be cleared.

ctmask <0x0-0xffffffff>

restore-mark

Copy the connection mark (ctmark) to the packet mark (nfmark) using the given masks. The new ctmark value is determined as follows: nfmark = (nfmark & ~nfmask) ^ (ctmark & ctmask) i.e. nfmask defines what bits to clear and ctmask what bits of the ctmark to XOR into the packet mark. ctmask and nfmask default to 0xFFFFFFFF. restore-mark is only valid in the mangle table.

restore-mark nfmask <0x0-0xffffffff> ctmask <0x0-0xffffffff>

nfmask

Bits that should be cleared.

nfmask <0x0-0xffffffff>

ctmask

Bits that should be XORed into the packet mark.

ctmask <0x0-0xffffffff>

log

Turn on logging of matching packets.

log level LEVEL prefix <string> additional-infos ADDITIONAL-INFOS

level

Level of logging.

level LEVEL

LEVEL values	Description
emergency	Emergency level.
alert	Alert level.
critical	Critical level.
error	Error level.
warning	Warning level.
notice	Notice level.
info	Info level.
debug	Debug level.

prefix

Prefix log messages with the specified prefix, up to 29 letters long.

prefix <string>

additional-infos

Append additional informations to the logs.

additional-infos ADDITIONAL-INFOS

ADDITIONAL-INFOS values	Description
tcp-sequence	Log TCP sequence numbers.
tcp-options	Log options from the TCP packet header.
ip-options	Log options from the IP/IPv6 packet header.
user-id	Log the userid of the process which generated the packet.

mark

Used to set the mark value associated with the packet.

mark <0x0-0xffffffff> mask <0x0-0xffffffff>

<0x0-0xffffffff> (mandatory)

Bits that should be XORed into the packet mark.

<0x0-0xffffffff>

mask

Zero the bits given by this mask in the packet mark.

mask <0x0-0xffffffff>

tcpmss

Alters the MSS value of TCP SYN packets, to control the maximum size for that connection.

tcpmss set-mss <uint32> clamp-mss-to-pmtu

set-mss

Explicitly sets MSS option to specified value.

set-mss <uint32>

clamp-mss-to-pmtu

Automatically clamp MSS value to (path_MTU - 40 for IPv4, - 60 for IPv6).

clamp-mss-to-pmtu

counters (state only)

The counters of this rule.

packets (state only)

Packets.

vrouter> show state vrf <vrf> firewall ipv6 mangle chain <string> rule <uint64> counters packets

bytes (state only)

Bytes.

vrouter> show state vrf <vrf> firewall ipv6 mangle chain <string> rule <uint64> counters bytes