Showing the state summary of the device

The CLI is able to display the state summary of the device.

This operation is invoked with the show summary CLI command, which is available from the operation mode and from the edition mode.

Show the summary of the device:

vsr> show summary
Service                   Status
=======                   ======

license                   enabled, valid
product                   Virtual Service Router 3.0.0

fast-path                 disabled
linux                     3 cores, memory total 0.96GB available 0.09GB
network-port              1 port detected

vrf                       1 configured

interface physical        enabled in vrf main (1 up iface)
interface system-loopback enabled in vrf main (1 up iface)

routing                   enabled in vrf main (2 ipv4 routes, 2 ipv6 routes)

auth                      2 users
cloud-init                enabled
dhcp client               enabled in vrf main
dns                       enabled in vrf main
ssh-server                enabled in vrf main