ip pim¶
Note
requires a Product License.
Set IGMP configuration.
vsr running config# vrf <vrf> routing interface <interface> igmp
enabled¶
Enable IGMP/MLD flag on the interface.
vsr running config# vrf <vrf> routing interface <interface> igmp
vsr running igmp# enabled true|false
- Default value
false
version¶
Set IGMP version.
vsr running config# vrf <vrf> routing interface <interface> igmp
vsr running igmp# version <2-3>
query-interval¶
unit: seconds
Set the query interval is the interval between general queries sent by the querier.
vsr running config# vrf <vrf> routing interface <interface> igmp
vsr running igmp# query-interval <1-65535>
- Default value
125
query-max-response-time¶
unit: deciseconds
Set the maximum time allowed before sending a responding report.
vsr running config# vrf <vrf> routing interface <interface> igmp
vsr running igmp# query-max-response-time <1-65535>
- Default value
100
last-member-query-count¶
Set the last member query count, which may be tuned to modify the leave latency of the network.
vsr running config# vrf <vrf> routing interface <interface> igmp
vsr running igmp# last-member-query-count <1-255>
- Default value
2
last-member-query-interval¶
unit: deciseconds
Set the last member query interval, which may be tuned to modify the leave latency of the network.
vsr running config# vrf <vrf> routing interface <interface> igmp
vsr running igmp# last-member-query-interval <1-65535>
- Default value
10
static-group¶
Set a static multicast route, (*,G) or (S,G). The version of IGMP must be 3 to support (S,G).
vsr running config# vrf <vrf> routing interface <interface> igmp static-group <group-addr> <source-addr>
|
Description |
---|---|
|
This type represents an IPv4 multicast group address, which is in the range of 224.0.0.0 to 239.255.255.255. |
|
This type represents an IPv6 multicast group address, which is in the range of ff00::/8. |
|
Description |
---|---|
|
An IPv4 address. |
|
An IPv6 address. |