ldp¶
Note
requires a Product License.
LDP configuration.
vsr running config# vrf <vrf> routing mpls ldp
enabled (pushed)¶
Enable or disable LDP.
vsr running config# vrf <vrf> routing mpls ldp
vsr running ldp# enabled true|false
- Default value
true
router-id¶
LSR router identifier in IPv4 address format.
vsr running config# vrf <vrf> routing mpls ldp
vsr running ldp# router-id ROUTER-ID
|
An IPv4 address. |
discovery¶
Discovery parameters.
vsr running config# vrf <vrf> routing mpls ldp discovery
hello¶
LDP Link Hellos.
vsr running config# vrf <vrf> routing mpls ldp discovery hello
holdtime¶
Hello holdtime in seconds.
vsr running config# vrf <vrf> routing mpls ldp discovery hello
vsr running hello# holdtime <1-65535>
- Default value
15
interval¶
Hello interval in seconds.
vsr running config# vrf <vrf> routing mpls ldp discovery hello
vsr running hello# interval <1-65535>
- Default value
5
dual-stack¶
Configure dual stack parameters.
vsr running config# vrf <vrf> routing mpls ldp dual-stack
cisco-interop¶
Use Cisco non-compliant format to send and interpret the Dual-Stack capability TLV.
vsr running config# vrf <vrf> routing mpls ldp dual-stack
vsr running dual-stack# cisco-interop true|false
- Default value
false
transport-preference¶
Configure preferred address family for TCP transport connection with neighbor.
vsr running config# vrf <vrf> routing mpls ldp dual-stack
vsr running dual-stack# transport-preference TRANSPORT-PREFERENCE
|
Description |
---|---|
|
IPv4. |
|
IPv6. |
- Default value
ipv6
neighbor¶
Configure neighbor parameters.
vsr running config# vrf <vrf> routing mpls ldp neighbor <neighbor>
|
An IPv4 address. |
ttl-security¶
LDP ttl security check.
vsr running config# vrf <vrf> routing mpls ldp neighbor <neighbor> ttl-security
hops¶
Maximum number of IP hops.
vsr running config# vrf <vrf> routing mpls ldp neighbor <neighbor> ttl-security
vsr running ttl-security# hops <1-255>
disable¶
Disable ttl security.
vsr running config# vrf <vrf> routing mpls ldp neighbor <neighbor> ttl-security
vsr running ttl-security# disable true|false
- Default value
false
address-family¶
Configure Address Family and its parameters.
vsr running config# vrf <vrf> routing mpls ldp address-family
ipv4¶
IPv4.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4
session-holdtime¶
Session holdtime in seconds.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4
vsr running ipv4# session-holdtime <15-65535>
- Default value
180
discovery¶
Discovery parameters.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 discovery
transport-address (mandatory)¶
Transport address for TCP connection.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 discovery
vsr running discovery# transport-address TRANSPORT-ADDRESS
|
An IPv4 address. |
hello¶
LDP Link Hellos.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 discovery hello
holdtime¶
Hello holdtime in seconds.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 discovery hello
vsr running hello# holdtime <1-65535>
- Default value
15
interval¶
Hello interval in seconds.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 discovery hello
vsr running hello# interval <1-65535>
- Default value
5
interface¶
Enable LDP on an interface.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 interface <interface>
|
An interface name. |
label¶
Configure label control and policies.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label
local¶
Local label control and policies.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label local
advertise¶
Configure outbound label advertisement control.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label local advertise
IP access-list for destination prefixes.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label local advertise
vsr running advertise# for FOR
|
Access list name. |
IP Access-list specifying controls on LDP Peers.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label local advertise
vsr running advertise# to TO
|
Access list name. |
Configure explicit-null advertisement.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label local advertise explicit-null
IP access-list for destination prefixes.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label local advertise explicit-null
vsr running explicit-null# for FOR
|
Access list name. |
allocate¶
Configure label allocation control.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label local allocate
IP access-list.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label local allocate
vsr running allocate# for FOR
|
Access list name. |
Allocate local label for host routes only.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label local allocate
vsr running allocate# host-routes
remote¶
Remote/peer label control and policies.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label remote
accept¶
Configure inbound label acceptance control.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label remote accept
IP access-list for destination prefixes.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label remote accept
vsr running accept# for FOR
|
Access list name. |
Neighbor from whom to accept label advertisement.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv4 label remote accept
vsr running accept# from FROM
|
Access list name. |
ipv6¶
IPv6.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6
session-holdtime¶
Session holdtime in seconds.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6
vsr running ipv6# session-holdtime <15-65535>
- Default value
180
discovery¶
Discovery parameters.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 discovery
transport-address (mandatory)¶
Transport address for TCP connection.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 discovery
vsr running discovery# transport-address TRANSPORT-ADDRESS
|
An IPv6 address. |
hello¶
LDP Link Hellos.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 discovery hello
holdtime¶
Hello holdtime in seconds.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 discovery hello
vsr running hello# holdtime <1-65535>
- Default value
15
interval¶
Hello interval in seconds.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 discovery hello
vsr running hello# interval <1-65535>
- Default value
5
interface¶
Enable LDP on an interface.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 interface <interface>
|
An interface name. |
label¶
Configure label control and policies.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label
local¶
Local label control and policies.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label local
advertise¶
Configure outbound label advertisement control.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label local advertise
IP access-list for destination prefixes.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label local advertise
vsr running advertise# for FOR
|
Access list name. |
IP Access-list specifying controls on LDP Peers.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label local advertise
vsr running advertise# to TO
|
Access list name. |
Configure explicit-null advertisement.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label local advertise explicit-null
IP access-list for destination prefixes.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label local advertise explicit-null
vsr running explicit-null# for FOR
|
Access list name. |
allocate¶
Configure label allocation control.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label local allocate
IP access-list.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label local allocate
vsr running allocate# for FOR
|
Access list name. |
Allocate local label for host routes only.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label local allocate
vsr running allocate# host-routes
remote¶
Remote/peer label control and policies.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label remote
accept¶
Configure inbound label acceptance control.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label remote accept
IP access-list for destination prefixes.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label remote accept
vsr running accept# for FOR
|
Access list name. |
Neighbor from whom to accept label advertisement.
vsr running config# vrf <vrf> routing mpls ldp address-family ipv6 label remote accept
vsr running accept# from FROM
|
Access list name. |