6WIND - Virtual Service Router
Version 3.10.1
  • 1. Overview
  • 2. Getting Started
  • 3. User Guide
    • 3.1. User Guide - CLI / NETCONF
      • 3.1.1. Preface
      • 3.1.2. Key features
      • 3.1.3. Basics
      • 3.1.4. System
      • 3.1.5. Network interfaces
      • 3.1.6. IP Networking
      • 3.1.7. Routing
        • Static routes
        • L3VRF
        • Routing utilities
        • BGP
        • ISIS
        • MPLS
        • DMVPN and NHRP
        • OSPF
        • RIP
        • OSPFv3
        • RIPNG
        • BFD
        • Path Monitoring
        • Policy-based routing
        • Multicast
        • SRTE
        • SRv6
      • 3.1.8. QoS
      • 3.1.9. Security
      • 3.1.10. High Availability
      • 3.1.11. Monitoring
      • 3.1.12. Services
      • 3.1.13. Maximum Capacity Specifications
      • 3.1.14. Diagnostic
      • 3.1.15. Automation
    • 3.2. Command Reference
6WIND - Virtual Service Router
  • »
  • 3. User Guide »
  • 3.1. User Guide - CLI / NETCONF »
  • 3.1.7. Routing »
  • BGP »
  • BGP VPNS

BGP VPNSΒΆ

  • VPNs using BGP
    • Introduction
    • L3VPN service
    • EVPN service
    • Control and distribute routing information across BGP VPNs
  • BGP for L3VPN
    • L3VPN basic configuration
    • Configure locally route leaking between VPNs
    • Interconnect two geographically separate VPNs
    • Interconnect traffic between direct connections
    • Redistribute L3VPN traffic between ASBRs from 2 domains
    • Interconnect IPv6 L3VRF instances over an IPv4 MPLS network (6vpe)
    • L3VPN advanced configuration
  • BGP for EVPN
    • EVPN common configuration
    • EVPN routed configuration
    • EVPN bridged configuration
    • Use case for routing mode
    • Use case for bridging mode
  • BGP for L3VPN using SRv6
    • L3VRF SRv6 configuration
Next Previous

© Copyright 2025 6WIND S.A.