2.4.5. Configuring the fast pathΒΆ
The fast path is the Virtual Service Router component in charge of packet processing. To accelerate ethernet NICs, they must be dedicated to the fast path, and the fast path must be started.
Dedicate ports to the fast path and start it:
vsr> edit running vsr running config# system fast-path vsr running fast-path#! port pci-b0s4 vsr running fast-path# port pci-b0s5 vsr running fast-path# show config fast-path enabled true port pci-b0s4 port pci-b0s5 vsr running fast-path# commit
Note
use
show state / network-port
to see the list of available network ports with PCI ids; it can help choosing the right ports.Check that the fast path has been started (it can take some time):
vsr running fast-path# show state fast-path port pci-b0s5 port pci-b0s4 enabled true