2.3. Installation for the container

This section explains the requirements and recommendations to run a Virtual Service Router inside a container. This configuration has to be applied on the host that runs the container (called “node” later in the documentation).

The following part gives some examples using supported container engines.

• 2.3.1. Node requirements and configuration
• 2.3.2. Run container using docker
• 2.3.3. Run container using Kubernetes
• 2.3.4. Run container using OpenShift
• 2.3.5. Run container using VMware TKG and TCA
• 2.3.6. Run container using Windriver Cloud Platform
• 2.3.7. Run container using KubeVirt