3.2.2. show¶

show summary¶

vsr> show summary

Show a summary of the system state.

show interface¶

vsr> show interface [vrf <string>] [l3vrf <string>] [type <identityref>] [LEVEL] \
...            [name <string>]

Show interface information.

Input Parameters¶

vrf <string>

VRF to look into.

l3vrf <string>

L3vrf to look into.

type <identityref>

Interface type.

LEVEL

The level of information requested.

`LEVEL` values	Description
statistics	Display statistics.
details	Display more details.
up	Display UP interfaces only.
hardware-statistics	Display hardware statistics. Implies physical type.
hardware-features	Display hardware features. Implies physical type.
hardware-information	Display hardware information. Implies physical type.
hardware-driver-information	Display hardware driver information. Implies physical type.

name <string>

Display only one interface by this name.

show interface throughput¶

vsr> show interface throughput [vrf <string>] [type <identityref>] [name <string>] [count <uint16>] \
...            [raw]

Show interface throughput every second.

Input Parameters¶

vrf <string>: VRF to look into.
type <identityref>: Select all interfaces of this type.
name <string>: Select this specific interface (may be specified multiple times).
count <uint16>: Stop after the given number of seconds. By default, the throughput is displayed every second until the command is interrupted with ctrl-c.
raw: Show the exact number of packets/bits received/transmitted every second instead of human readable values.

show ipv4-routes¶

vsr> show ipv4-routes [vrf <string>] [l3vrf <string>] [protocol <identityref>] [table <uint32>] \
...            [to TO] [summary]

Show IPv4 routing table.

Input Parameters¶

vrf <string>

Specify the VRF.

l3vrf <string>

Specify the l3vrf.

protocol <identityref>

Filter routes by protocol.

table <uint32>

Non-main Kernel Routing Table.

to TO

Find the route entry used to reach an IP address or an exact network.

`TO` values	Description
<A.B.C.D>	An IPv4 address.
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.

summary

Summary of all routes.

show ipv6-routes¶

vsr> show ipv6-routes [vrf <string>] [l3vrf <string>] [protocol <identityref>] [table <uint32>] \
...            [to TO] [summary]

Show IPv6 routing table.

Input Parameters¶

vrf <string>

Specify the VRF.

l3vrf <string>

Specify the l3vrf.

protocol <identityref>

Filter routes by protocol.

table <uint32>

Non-main Kernel Routing Table.

to TO

Find the route entry used to reach an IPv6 address or an exact network.

`TO` values	Description
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

summary

Summary of all routes.

show mpls table¶

Note

requires a Product License.

vsr> show mpls table [vrf <string>] [<uint32>]

Show MPLS table information.

Input Parameters¶

vrf <string>: Specify the VRF.
<uint32>: LSP to display information about.

show disk¶

Note

requires a Product License.

vsr> show disk

Show Linux system disk usage.

Output Data¶

disk-usage

The disk information per device.

name <string>

The disk name.

label <string>

The disk label.

total <uint64>

The disk total size.

partition

The partition information per disk.

name <string>: The partition name.
label <string>: The partition label.
fstype <string>: The partition filesystem type.
total <uint64>: The partition total size.
available <uint64>: The partition free size.

show bgp¶

Note

requires a Product License.

vsr> show bgp pbr ipset [set <string>] iptable [chain <string>] [vrf <string>] \
...            [l3vrf <string>] [l3vrfs] summary [STATE] [neighbor NEIGHBOR] \
...            [remote-as REMOTE-AS] [neighbors] neighbor [id ID] unnumbered-neighbor \
...            [interface INTERFACE] community-list large-community-list extcommunity-list \
...            as-path-access-list [name <string>] [route-map <string>] ipv4 \
...            ip [VALUE] [bestpath] [multipath] prefix [value VALUE] [bestpath] \
...            [multipath] [longer-prefixes] [cidr-only] [statistics] summary \
...            [STATE] [neighbor NEIGHBOR] [remote-as REMOTE-AS] community-list \
...            [name <string>] [exact-match] community [VALUE] [exact-match] \
...            large-community-list [name <string>] [exact-match] large-community \
...            [VALUE] [exact-match] [route-map <string>] flowspec ip [VALUE] \
...            [bestpath] [multipath] prefix [value VALUE] [bestpath] [multipath] \
...            [longer-prefixes] [detail] [cidr-only] [statistics] summary [STATE] \
...            [neighbor NEIGHBOR] [remote-as REMOTE-AS] community-list [name <string>] \
...            [exact-match] community [VALUE] [exact-match] large-community-list \
...            [name <string>] [exact-match] large-community [VALUE] [exact-match] \
...            [route-map <string>] unicast neighbor [id ID] [prefix-counts] \
...            received [prefix-filter] [advertised-routes] [dampened-routes] \
...            [filtered-routes] [flap-statistics] [received-routes] [routes] \
...            ip [VALUE] [bestpath] [multipath] prefix [value VALUE] [bestpath] \
...            [multipath] [longer-prefixes] [cidr-only] [statistics] summary \
...            [STATE] [neighbor NEIGHBOR] [remote-as REMOTE-AS] community-list \
...            [name <string>] [exact-match] community [VALUE] [exact-match] \
...            large-community-list [name <string>] [exact-match] large-community \
...            [VALUE] [exact-match] [route-map <string>] multicast neighbor \
...            [id ID] [prefix-counts] [advertised-routes] [dampened-routes] \
...            [filtered-routes] [flap-statistics] [received-routes] [routes] \
...            ip [VALUE] [bestpath] [multipath] prefix [value VALUE] [bestpath] \
...            [multipath] [longer-prefixes] [cidr-only] [statistics] summary \
...            [STATE] [neighbor NEIGHBOR] [remote-as REMOTE-AS] community-list \
...            [name <string>] [exact-match] community [VALUE] [exact-match] \
...            large-community-list [name <string>] [exact-match] large-community \
...            [VALUE] [exact-match] [route-map <string>] labeled-unicast neighbor \
...            [id ID] [advertised-routes] [dampened-routes] [filtered-routes] \
...            [flap-statistics] [received-routes] [routes] ip [VALUE] [bestpath] \
...            [multipath] prefix [value VALUE] [bestpath] [multipath] [longer-prefixes] \
...            [cidr-only] [statistics] summary [STATE] [neighbor NEIGHBOR] \
...            [remote-as REMOTE-AS] community-list [name <string>] [exact-match] \
...            community [VALUE] [exact-match] large-community-list [name <string>] \
...            [exact-match] large-community [VALUE] [exact-match] [route-map <string>] \
...            vpn [route-distinguisher ROUTE-DISTINGUISHER] neighbor [id ID] \
...            [prefix-counts] [advertised-routes] [dampened-routes] [filtered-routes] \
...            [flap-statistics] [received-routes] [routes] ip [VALUE] [bestpath] \
...            [multipath] prefix [value VALUE] [bestpath] [multipath] [longer-prefixes] \
...            [cidr-only] [statistics] summary [STATE] [neighbor NEIGHBOR] \
...            [remote-as REMOTE-AS] community-list [name <string>] [exact-match] \
...            community [VALUE] [exact-match] large-community-list [name <string>] \
...            [exact-match] large-community [VALUE] [exact-match] [route-map <string>] \
...            neighbor [id ID] [prefix-counts] received [prefix-filter] [advertised-routes] \
...            [dampened-routes] [filtered-routes] [flap-statistics] [received-routes] \
...            [routes] [neighbors] ipv6 ip [value VALUE] [bestpath] [multipath] \
...            prefix [VALUE] [bestpath] [multipath] [longer-prefixes] [cidr-only] \
...            [statistics] summary [STATE] [neighbor NEIGHBOR] [remote-as REMOTE-AS] \
...            community-list [name <string>] [exact-match] community [VALUE] \
...            [exact-match] large-community-list [name <string>] [exact-match] \
...            large-community [VALUE] [exact-match] [route-map <string>] flowspec \
...            ip [value VALUE] [bestpath] [multipath] prefix [VALUE] [bestpath] \
...            [multipath] [longer-prefixes] [detail] [cidr-only] [statistics] \
...            summary [STATE] [neighbor NEIGHBOR] [remote-as REMOTE-AS] community-list \
...            [name <string>] [exact-match] community [VALUE] [exact-match] \
...            large-community-list [name <string>] [exact-match] large-community \
...            [VALUE] [exact-match] [route-map <string>] unicast neighbor [id ID] \
...            [prefix-counts] received [prefix-filter] [advertised-routes] \
...            [dampened-routes] [filtered-routes] [flap-statistics] [received-routes] \
...            [routes] ip [value VALUE] [bestpath] [multipath] prefix [VALUE] \
...            [bestpath] [multipath] [longer-prefixes] [cidr-only] [statistics] \
...            summary [STATE] [neighbor NEIGHBOR] [remote-as REMOTE-AS] community-list \
...            [name <string>] [exact-match] community [VALUE] [exact-match] \
...            large-community-list [name <string>] [exact-match] large-community \
...            [VALUE] [exact-match] [route-map <string>] multicast neighbor \
...            [id ID] [prefix-counts] [advertised-routes] [dampened-routes] \
...            [filtered-routes] [flap-statistics] [received-routes] [routes] \
...            ip [value VALUE] [bestpath] [multipath] prefix [VALUE] [bestpath] \
...            [multipath] [longer-prefixes] [cidr-only] [statistics] summary \
...            [STATE] [neighbor NEIGHBOR] [remote-as REMOTE-AS] community-list \
...            [name <string>] [exact-match] community [VALUE] [exact-match] \
...            large-community-list [name <string>] [exact-match] large-community \
...            [VALUE] [exact-match] [route-map <string>] labeled-unicast neighbor \
...            [id ID] [advertised-routes] [dampened-routes] [filtered-routes] \
...            [flap-statistics] [received-routes] [routes] ip [value VALUE] \
...            [bestpath] [multipath] prefix [VALUE] [bestpath] [multipath] \
...            [longer-prefixes] [cidr-only] [statistics] summary [STATE] [neighbor NEIGHBOR] \
...            [remote-as REMOTE-AS] community-list [name <string>] [exact-match] \
...            community [VALUE] [exact-match] large-community-list [name <string>] \
...            [exact-match] large-community [VALUE] [exact-match] [route-map <string>] \
...            vpn neighbor [id ID] [prefix-counts] [advertised-routes] [dampened-routes] \
...            [filtered-routes] [flap-statistics] [received-routes] [routes] \
...            ip [value VALUE] [bestpath] [multipath] prefix [VALUE] [bestpath] \
...            [multipath] [longer-prefixes] [cidr-only] [statistics] summary \
...            [STATE] [neighbor NEIGHBOR] [remote-as REMOTE-AS] community-list \
...            [name <string>] [exact-match] community [VALUE] [exact-match] \
...            large-community-list [name <string>] [exact-match] large-community \
...            [VALUE] [exact-match] [route-map <string>] neighbor [id ID] [prefix-counts] \
...            received [prefix-filter] [advertised-routes] [dampened-routes] \
...            [filtered-routes] [flap-statistics] [received-routes] [routes] \
...            [neighbors] l2vpn evpn [vnis] [vni VNI] [NET] summary [STATE] \
...            [neighbor NEIGHBOR] [remote-as REMOTE-AS] [overlay] [tags] neighbor \
...            NEIGHBOR [advertised-routes] [routes] [route-distinguisher ROUTE-DISTINGUISHER] \
...            route [type TYPE] [detail]

Show BGP information.

Input Parameters¶

pbr

Display information about PBR configured by BGP.

ipset

Display information about PBR IPSETs configured by BGP.

set <string>: Display information about this set.

iptable

Display information about PBR IPTables chainsa configured by BGP.

chain <string>: Display information about this chain.

vrf <string>

Specify the VRF.

l3vrf <string>

Specify the L3VRF.

l3vrfs

Show BGP VRFs.

summary

Display summary of BGP neighbor(s) status, this includes the whole bgp context.

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

neighbors

Display information about all BGP neighbors.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

unnumbered-neighbor

Display information about BGP unnumbered neighbor.

interface INTERFACE

Referenced interface name.

INTERFACE

An interface name.

community-list

Display information about BGP community lists (standard and expanded).

large-community-list

Display information about BGP large community lists (standard and expanded).

extcommunity-list

Display information about BGP extcommunity lists (standard and expanded).

as-path-access-list

Display information about AS-path access lists.

name <string>: Display information about a certain AS-Path access list.

route-map <string>

Display information about this route map.

ipv4

Display information about BGP IPv4.

ip

Display this address in the BGP routing table.

VALUE

Display this address in the BGP routing table.

VALUE

An IPv4 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

value VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv4 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

flowspec

Display information for flowspec address family.

ip

Display this address in the BGP routing table.

VALUE

Display this address in the BGP routing table.

VALUE

An IPv4 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

value VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv4 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

detail

Display detailed information on flowspec entries.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

unicast

Display information for unicast address family.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

prefix-counts

Display detailed prefix count information.

received

Display information received from a BGP neighbor.

prefix-filter: Display the prefixlist filter.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

ip

Display this address in the BGP routing table.

VALUE

Display this address in the BGP routing table.

VALUE

An IPv4 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

value VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv4 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

multicast

Display information for multicast address family.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

prefix-counts

Display detailed prefix count information.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

ip

Display this address in the BGP routing table.

VALUE

Display this address in the BGP routing table.

VALUE

An IPv4 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

value VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv4 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

labeled-unicast

Display information for labeled unicast address family.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

ip

Display this address in the BGP routing table.

VALUE

Display this address in the BGP routing table.

VALUE

An IPv4 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

value VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv4 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

vpn

Display information for VPN address family.

route-distinguisher ROUTE-DISTINGUISHER

Display information for a route distinguisher.

`ROUTE-DISTINGUISHER` values	Description
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

prefix-counts

Display detailed prefix count information.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

ip

Display this address in the BGP routing table.

VALUE

Display this address in the BGP routing table.

VALUE

An IPv4 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

value VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv4 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

prefix-counts

Display detailed prefix count information.

received

Display information received from a BGP neighbor.

prefix-filter: Display the prefixlist filter.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

neighbors

Display information about all BGP neighbors.

ipv6

Display information about BGP IPv6.

ip

Display this address in the BGP routing table.

value VALUE

Display this address in the BGP routing table.

VALUE

An IPv6 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv6 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

flowspec

Display information for flowspec address family.

ip

Display this address in the BGP routing table.

value VALUE

Display this address in the BGP routing table.

VALUE

An IPv6 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv6 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

detail

Display detailed information on flowspec entries.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

unicast

Display information for unicast address family.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

prefix-counts

Display detailed prefix count information.

received

Display information received from a BGP neighbor.

prefix-filter: Display the prefixlist filter.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

ip

Display this address in the BGP routing table.

value VALUE

Display this address in the BGP routing table.

VALUE

An IPv6 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv6 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

multicast

Display information for multicast address family.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

prefix-counts

Display detailed prefix count information.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

ip

Display this address in the BGP routing table.

value VALUE

Display this address in the BGP routing table.

VALUE

An IPv6 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv6 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

labeled-unicast

Display information for labeled unicast address family.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

ip

Display this address in the BGP routing table.

value VALUE

Display this address in the BGP routing table.

VALUE

An IPv6 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv6 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

vpn

Display information for VPN address family.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

prefix-counts

Display detailed prefix count information.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

ip

Display this address in the BGP routing table.

value VALUE

Display this address in the BGP routing table.

VALUE

An IPv6 address.

bestpath

Display only the best path.

multipath

Display only multipaths.

prefix

Display this network in the BGP routing table.

VALUE

Display this prefix in the BGP routing table.

VALUE

An IPv6 prefix: address and CIDR mask.

bestpath

Display only the best path.

multipath

Display only multipaths.

longer-prefixes

Display route and more specific routes.

cidr-only

Display only routes with non-natural netmask.

statistics

Display BGP RIB advertisement statistics.

summary

Display summary of BGP IPv4/IPv6 neighbors status. Can be filtered by subsequent address family (SAFI).

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

community-list

Display routes matching the community-list.

name <string>: BGP community list name.
exact-match: Exact match of the communities.

community

Display routes matching the communities.

VALUE

BGP community value.

`VALUE` values	Description
local-AS	Local AS.
no-advertise	Do not advertise.
no-export	Do not export.
internet	Internet.
graceful-shutdown	Graceful-shutdown.
accept-own	Accept-own.
route-filter-translated-v4	Route-filter-translated-v4.
route-filter-v4	Route-filter-v4.
route-filter-translated-v6	Route-filter-translated-v6.
route-filter-v6	Route-filter-v6.
llgr-stale	Llgr-stale.
no-llgr	No-llgr.
accept-own-nexthop	Accept-own-nexthop.
blackhole	Blackhole.
no-peer	No-peer.
<string>	Community attribute.

exact-match

Exact match of the communities.

large-community-list

Display routes matching the large-community-list.

name <string>: BGP large community list name.
exact-match: Exact match of the large communities.

large-community

Display routes matching the large communities.

VALUE

BGP large community value.

VALUE

Large community attribute.

exact-match

Exact match of the large communities.

route-map <string>

Display information about this route map.

neighbor

Display information about one BGP neighbor.

id ID

Display information about one BGP neighbor.

`ID` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

prefix-counts

Display detailed prefix count information.

received

Display information received from a BGP neighbor.

prefix-filter: Display the prefixlist filter.

advertised-routes

Display the routes advertised to a BGP neighbor.

dampened-routes

Display the dampened routes received from neighbor.

filtered-routes

Display the filtered routes received from neighbor.

flap-statistics

Display the flap statistics of the routes learned from neighbor.

received-routes

Display the received routes from neighbor.

routes

Display routes learned from neighbor.

neighbors

Display information about all BGP neighbors.

l2vpn

Display Layer 2 Virtual Private Network information.

evpn

Display Ethernet Virtual Private Network information.

vnis

Display all VNIs information.

vni VNI

Display VNI information.

VNI	Type definition representing VXLAN Segment ID / VXLAN Network Identifier value.

NET

Network in the BGP routing table to display.

`NET` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

summary

Display the summary of l2vpn BGP neighbors status.

STATE

The State of BGP neighbor(s).

`STATE` values	Description
established	Summary of BGP established neighbor(s).
failed	Summary of BGP failed neighbor(s).

neighbor NEIGHBOR

Display information about one BGP neighbor.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

remote-as REMOTE-AS

The Summary of BGP remote-as.

`REMOTE-AS` values	Description
external	Summary of BGP external remote-as.
internal	Summary of BGP internal remote-as.
<uint32>	A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

overlay

Display BGP Overlay Information for prefixes.

tags

Display BGP tags for prefixes.

neighbor

Detailed information on TCP and BGP neighbor connections.

NEIGHBOR (mandatory)

Neighbor to display information about.

`NEIGHBOR` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

advertised-routes

Display the routes advertised to a BGP neighbor.

routes

Display routes learned from neighbor.

route-distinguisher ROUTE-DISTINGUISHER

Display information for a route distinguisher.

`ROUTE-DISTINGUISHER` values	Description
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.
<string>	Type definition for extended community attributes. In the case that common communities are utilised, they are represented as a string of the form: - <2b AS>:<4b value> per RFC4360 section 3.1 - <4b IPv4>:<2b value> per RFC4360 section 3.2.

route

Detailed information BPG L2VPN EVPN routes.

type TYPE

Specify route type.

`TYPE` values	Description
macip	MAC-IP (Type-2) route.
multicast	Multicast (Type-3) route.
prefix	Prefix (Type-5) route.

detail

Display detail information.

show bgp bmp¶

vsr> show bgp bmp [vrf <string>]

Show BGP BMP information.

Input Parameters¶

vrf <string>: VRF to look into.

Output Data¶

bmp

BGP BMP operational state.

route-mirroring

BGP BMP route mirroring information.

pending-bytes <uint32>: Number of penting bytes.
pending-messages <uint32>: Number of penting messages.
buffer-used <uint32>: Number of bytes used in buffer.

targets

Target group operational state.

name <string>

Name of the BMP target group.

connect

BGP BMP connection operational state.

host HOST

Monitoring station hostname or address.

`HOST` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
<host-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.

port PORT (mandatory)

TCP port number.

PORT	A 16-bit port number used by a transport protocol such as TCP or UDP.

state STATE

Connection state.

`STATE` values	Description
up	Connection is UP.
retry-wait	Wait before retry connecting.
connecting	Connecting in progress.
resolving	Trying to resolve host name.
unknown	Unknown state.

retry-timer <string>

Time before reconnect to the client if previous try has failed (if state is RetryWait).

uptime <string>

Time since the connection has been established (if state is Up).

monitor-sent <uint32>

Number of monitor packets sent.

mirror-sent <uint32>

Number of mirroring packets sent.

mirror-lost <uint32>

Number of times this peer wasn’t fast enough in consuming the mirror queue.

byte-sent <uint32>

Number of bytes sent to the peer.

byte-queue <uint32>

Number of bytes in the output buffer.

byte-kernel-queue <uint32>

Number of bytes in the kernel output buffer.

show bgp rpki cache-connection¶

Note

requires a Product License.

vsr> show bgp rpki cache-connection [vrf VRF] [l3vrf <string>]

Show which RPKI cache servers have a connection.

Input Parameters¶

vrf VRF

Specify the VRF.

`VRF` values	Description
main	The main vrf.
<string>	The vrf name.

l3vrf <string>

Specify the L3VRF.

show bgp rpki cache-server¶

Note

requires a Product License.

vsr> show bgp rpki cache-server [vrf VRF] [l3vrf <string>]

Show RPKI configured cache server.

Input Parameters¶

vrf VRF

Specify the VRF.

`VRF` values	Description
main	The main vrf.
<string>	The vrf name.

l3vrf <string>

Specify the L3VRF.

show bgp rpki prefix-table¶

Note

requires a Product License.

vsr> show bgp rpki prefix-table [vrf VRF] [l3vrf <string>] [PREFIX] [as AS]

Show validated prefixes which were received from RPKI Cache.

Input Parameters¶

vrf VRF

Specify the VRF.

`VRF` values	Description
main	The main vrf.
<string>	The vrf name.

l3vrf <string>

Specify the L3VRF.

PREFIX

Lookup by IPv4/IPv6 prefix.

`PREFIX` values	Description
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

as AS

Lookup by AS number.

AS

A numeric identifier for an autonomous system (AS). An AS is a single domain, under common administrative control, which forms a unit of routing policy. Autonomous systems can be assigned a 2-byte identifier, or a 4-byte identifier which may have public or private scope. Private ASNs are assigned from dedicated ranges. Public ASNs are assigned from ranges allocated by IANA to the regional internet registries (RIRs).

show evpn¶

Note

requires a Product License.

vsr> show evpn [vrf <string>] [arp-cache] [mac] vni VNI [detail]

Show EVPN information.

Input Parameters¶

vrf <string>

Specify the VRF.

arp-cache

Show ARP and ND cache information.

mac

Show MAC addresses information.

vni VNI (mandatory)

Show EVPN information about a specific VNI or all.

`VNI` values	Description
all	Show all VNIs.
<uint32>	Type definition representing VXLAN Segment ID / VXLAN Network Identifier value.

detail

Detail information on each VNI.

show ospf¶

Note

requires a Product License.

vsr> show ospf [vrf <string>] [l3vrf <string>] [l3vrfs] [route] database [default] \
...            [max-age] router [ADDRESS] [advertising-router ADVERTISING-ROUTER] \
...            asbr-summary [ADDRESS] [advertising-router ADVERTISING-ROUTER] \
...            external [ADDRESS] [advertising-router ADVERTISING-ROUTER] network \
...            [ADDRESS] [advertising-router ADVERTISING-ROUTER] nssa-external \
...            [ADDRESS] [advertising-router ADVERTISING-ROUTER] opaque-area \
...            [ADDRESS] [advertising-router ADVERTISING-ROUTER] opaque-link \
...            [ADDRESS] [advertising-router ADVERTISING-ROUTER] opaque-as [ADDRESS] \
...            [advertising-router ADVERTISING-ROUTER] summary [ADDRESS] [advertising-router ADVERTISING-ROUTER] \
...            neighbor [ADDRESS] [IFNAME] [detail] interface [traffic] [NAME]

Show OSPF information.

Input Parameters¶

vrf <string>

Specify the VRF.

l3vrf <string>

Specify the L3VRF.

l3vrfs

Available VRFs.

route

OSPF routing table.

database

Database summary.

default

Database summary.

max-age

Database maximum age.

router

Database Router link states.

ADDRESS

The router address.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
self-originate	Self-originated link states.

advertising-router ADVERTISING-ROUTER

The advertising router address.

ADVERTISING-ROUTER

An IPv4 address.

asbr-summary

Database ASBR summary link states.

ADDRESS

The router address.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
self-originate	Self-originated link states.

advertising-router ADVERTISING-ROUTER

The advertising router address.

ADVERTISING-ROUTER

An IPv4 address.

external

Database External link states.

ADDRESS

The router address.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
self-originate	Self-originated link states.

advertising-router ADVERTISING-ROUTER

The advertising router address.

ADVERTISING-ROUTER

An IPv4 address.

network

Database Network link states.

ADDRESS

The router address.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
self-originate	Self-originated link states.

advertising-router ADVERTISING-ROUTER

The advertising router address.

ADVERTISING-ROUTER

An IPv4 address.

nssa-external

Database NSSA external link states.

ADDRESS

The router address.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
self-originate	Self-originated link states.

advertising-router ADVERTISING-ROUTER

The advertising router address.

ADVERTISING-ROUTER

An IPv4 address.

opaque-area

Database Opaque link state area.

ADDRESS

The router address.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
self-originate	Self-originated link states.

advertising-router ADVERTISING-ROUTER

The advertising router address.

ADVERTISING-ROUTER

An IPv4 address.

opaque-link

Database Opaque link states.

ADDRESS

The router address.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
self-originate	Self-originated link states.

advertising-router ADVERTISING-ROUTER

The advertising router address.

ADVERTISING-ROUTER

An IPv4 address.

opaque-as

Database Opaque AS link states.

ADDRESS

The router address.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
self-originate	Self-originated link states.

advertising-router ADVERTISING-ROUTER

The advertising router address.

ADVERTISING-ROUTER

An IPv4 address.

summary

Database Summary link states.

ADDRESS

The router address.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
self-originate	Self-originated link states.

advertising-router ADVERTISING-ROUTER

The advertising router address.

ADVERTISING-ROUTER

An IPv4 address.

neighbor

Neighbors information.

ADDRESS

Neighbor ID.

ADDRESS

An IPv4 address.

IFNAME

The interface name.

IFNAME

An interface name.

detail

Show detailed neighbor’s information.

interface

Interface information.

traffic

Interface traffic information.

NAME

The interface name. If not specified, show all interfaces.

NAME	An interface name.

show rip¶

Note

requires a Product License.

vsr> show rip [vrf <string>] [status]

Show RIP information.

Input Parameters¶

vrf <string>: Specify the VRF.
status: Show RIP status.

show ospf6¶

Note

requires a Product License.

vsr> show ospf6 [vrf <string>] route [DESTINATION] database [default] [router] \
...            [neighbor] interface [NAME]

Show OSPFv3 information.

Input Parameters¶

vrf <string>

Specify the VRF.

route

OSPFv3 routing table.

DESTINATION

The route destination.

`DESTINATION` values	Description
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.
detail	Detailed information.
external-1	Display Type-1 External routes.
external-2	Display Type-2 External routes.
inter-area	Display Inter-Area routes.
intra-area	Display Intra-Area routes.
summary	Route table summary.

database

Database summary.

default: Database summary.
router: Database Router link states.

neighbor

Neighbor list.

interface

Interface information.

NAME

The interface name. If not specified, show all interfaces.

NAME	An interface name.

show ripng¶

Note

requires a Product License.

vsr> show ripng [status]

Show RIPng information.

Input Parameters¶

status: Show RIPng status.

show mpls ldp¶

Note

requires a Product License.

vsr> show mpls ldp [vrf <string>] discovery [detail] [interface] [capabilities] \
...            neighbor [LSR-ID] [capabilities] [detail] binding [PREFIX] [longer-prefixes] \
...            [local-label <uint32>] [remote-label <uint32>] [neighbor NEIGHBOR] \
...            [detail] [ipv4] [ipv6]

Show MPLS LDP information.

Input Parameters¶

vrf <string>

Specify the VRF.

discovery

Discovery Hello Information.

detail: Show detailed information.

interface

Interface information.

capabilities

Display neighbor capability information.

neighbor

Neighbor information.

LSR-ID

OSPF routing table.

LSR-ID

An IPv4 address.

capabilities

Display neighbor capability information.

detail

Show detailed information.

binding

Label Information Base (LIB) information.

PREFIX

Destination prefix.

`PREFIX` values	Description
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

longer-prefixes

Include longer matches.

local-label <uint32>

Locally assigned label value.

remote-label <uint32>

Match remotely assigned label values.

neighbor NEIGHBOR

Display labels from LDP neighbor.

NEIGHBOR

An IPv4 address.

detail

Show detailed information.

ipv4

IPv4 Address Family.

ipv6

IPv6 Address Family.

show bfd¶

Note

requires a Product License.

vsr> show bfd [vrf VRF] [address ADDRESS] [HOP-TYPE] [source SOURCE] [interface INTERFACE] \
...            [counters]

Show BFD information.

Input Parameters¶

vrf VRF

Specify the VRF.

`VRF` values	Description
main	The main vrf.
<string>	The vrf name.

address ADDRESS

IP address of the peer.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

HOP-TYPE

Show single or multi hop session.

`HOP-TYPE` values	Description
single-hop	Show single-hop session.
multi-hop	Show multi-hop session.

source SOURCE

Local IP address.

`SOURCE` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
any	Accept any source addresses.

interface INTERFACE

Interface used to contact peer.

INTERFACE

An interface name.

counters

Show BFD session counters information.

show path-monitoring¶

Note

requires a Product License.

vsr> show path-monitoring [vrf VRF] [address ADDRESS] [operational]

Show path monitoring information.

Input Parameters¶

vrf VRF

Specify the VRF.

`VRF` values	Description
main	The main vrf.
<string>	The vrf name.

address ADDRESS

IP address of the peer.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

operational

Show session operational information.

show nhrp¶

Note

requires a Product License.

vsr> show nhrp [vrf <string>] [cache] [nhs] [opennhrp] [shortcut] [default]

Show NHRP IPv4 information.

Input Parameters¶

vrf <string>: Specify the VRF.
cache: NHRP forwarding cache information.
nhs: NHRP Next hop server information.
opennhrp: NHRP opennhrpctl style cache dump.
shortcut: NHRP shortcut information.
default: NHRP default information.

show nhrp6¶

Note

requires a Product License.

vsr> show nhrp6 [vrf <string>] [cache] [nhs] [opennhrp] [shortcut] [default]

Show NHRP IPv6 information.

Input Parameters¶

vrf <string>: Specify the VRF.
cache: NHRP forwarding cache information.
nhs: NHRP Next hop server information.
opennhrp: NHRP opennhrpctl style cache dump.
shortcut: NHRP shortcut information.
default: NHRP default information.

show pbr¶

Note

requires a Product License.

vsr> show pbr [family FAMILY] [vrf <string>]

Show policy based routing information.

Input Parameters¶

family FAMILY

Display the policy based routing rules for this family type.

`FAMILY` values	Description
ipv4	IPV4 rules only.
ipv6	IPV6 rules only.
<string>	No description.

vrf <string>

The VRF in which to show the policy based routing.

Output Data¶

ipv4-rule

IPv4 rule state.

priority <string>

Priority of the rule. High number means lower priority.

not

Invert the match.

match

Configure the packet selector.

inbound-interface INBOUND-INTERFACE

Match this incoming interface.

INBOUND-INTERFACE

An interface name.

mark MARK

Match this mark filter.

`MARK` values	Description
<0x0-0xffffffff>	Firewall mark.
<0x0-0xffffffff/0x0-0xffffffff>	Firewall mark filter.

source SOURCE

Match this source address or prefix.

`SOURCE` values	Description
<A.B.C.D>	An IPv4 address.
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.

destination DESTINATION

Match this destination address or prefix.

`DESTINATION` values	Description
<A.B.C.D>	An IPv4 address.
<A.B.C.D/M>	An IPv4 prefix: address and CIDR mask.

outbound-interface OUTBOUND-INTERFACE

Match this outgoing interface.

OUTBOUND-INTERFACE

An interface name.

tos <uint32>

Match this tos.

l3vrf

Match any l3vrf.

other

Match a specific attribute.

attr <string>: The attribute to match.
value <string>: The value to match.

action

Configure the action for packets matching the selector.

lookup LOOKUP

Lookup in this table.

`LOOKUP` values	Description
<uint32>	Table type.
local	High priority control routes for local and broadcast addresses (table 255).
main	Normal routing table, containing all non-policy routes (table 254).
default	Reserved for some post-processing if no previous default rules selected the packet (table 253).
l3vrf-table	Lookup in a l3vrf table (table 0 and l3vrf match).

goto <uint32>

Jump to the specified priority rule.

other OTHER

Other actions.

`OTHER` values	Description
unknown	Unknown action.
blackhole	Indicates that the rule requires a silent drop.
prohibit	Indicates that the rule requires a ‘Communication is administratively prohibited’ error.
unreachable	Indicates that the rule requires a ‘Network is unreachable’ error.
nat	Indicates that a nat operation is requested.

ipv6-rule

IPv6 rule state.

priority <string>

Priority of the rule. High number means lower priority.

not

Invert the match.

match

Configure the packet selector.

inbound-interface INBOUND-INTERFACE

Match this incoming interface.

INBOUND-INTERFACE

An interface name.

mark MARK

Match this mark filter.

`MARK` values	Description
<0x0-0xffffffff>	Firewall mark.
<0x0-0xffffffff/0x0-0xffffffff>	Firewall mark filter.

source SOURCE

Match this source address or prefix.

`SOURCE` values	Description
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

destination DESTINATION

Match this destination address or prefix.

`DESTINATION` values	Description
<X:X::X:X>	An IPv6 address.
<X:X::X:X/M>	An IPv6 prefix: address and CIDR mask.

outbound-interface OUTBOUND-INTERFACE

Match this outgoing interface.

OUTBOUND-INTERFACE

An interface name.

tos <uint32>

Match this tos.

l3vrf

Match any l3vrf.

other

Match a specific attribute.

attr <string>: The attribute to match.
value <string>: The value to match.

action

Configure the action for packets matching the selector.

lookup LOOKUP

Lookup in this table.

`LOOKUP` values	Description
<uint32>	Table type.
local	High priority control routes for local and broadcast addresses (table 255).
main	Normal routing table, containing all non-policy routes (table 254).
default	Reserved for some post-processing if no previous default rules selected the packet (table 253).
l3vrf-table	Lookup in a l3vrf table (table 0 and l3vrf match).

goto <uint32>

Goto to the specified priority rule.

other OTHER

Other actions.

`OTHER` values	Description
unknown	Unknown action.
blackhole	Indicates that the rule requires a silent drop.
prohibit	Indicates that the rule requires a ‘Communication is administratively prohibited’ error.
unreachable	Indicates that the rule requires a ‘Network is unreachable’ error.
nat	Indicates that a nat operation is requested.

show license¶

vsr> show license

Show license information.

show boot-params¶

vsr> show boot-params

Show boot parameters. Image must be installed on disk.

Output Data¶

current

Current boot parameters.

intel-iommu true|false

Enable intel iommu driver. Control intel_iommu=on|off kernel option.

iommu-allow-unsafe-interrupts true|false

Enable PCI passthrough on hardware that does not support interrupt remapping, when VM are trusted. Control vfio_iommu_type1.allow_unsafe_interrupts=0|1 kernel option.

ixgbe-allow-unsupported-sfp true|false

Bypass SFPs types restrictions on Intel ixgbe NICs. Control ixgbe.allow_unsupported_sfp=0|1 kernel option.

isolate-cpus ISOLATE-CPUS

Isolate cpus from kernel threads, rcu callbacks, and reduce the scheduler ticks. A good value for this parameter is the fast path coremask.

`ISOLATE-CPUS` values	Description
<cores-list>	A comma-separated list of cores or core ranges. Example: ‘1,4-7,10-12’.
none	Unset the coremask.

next

Next boot parameters.

intel-iommu true|false

Enable intel iommu driver. Control intel_iommu=on|off kernel option.

iommu-allow-unsafe-interrupts true|false

Enable PCI passthrough on hardware that does not support interrupt remapping, when VM are trusted. Control vfio_iommu_type1.allow_unsafe_interrupts=0|1 kernel option.

ixgbe-allow-unsupported-sfp true|false

Bypass SFPs types restrictions on Intel ixgbe NICs. Control ixgbe.allow_unsupported_sfp=0|1 kernel option.

isolate-cpus ISOLATE-CPUS

Isolate cpus from kernel threads, rcu callbacks, and reduce the scheduler ticks. A good value for this parameter is the fast path coremask.

`ISOLATE-CPUS` values	Description
<cores-list>	A comma-separated list of cores or core ranges. Example: ‘1,4-7,10-12’.
none	Unset the coremask.

show log¶

vsr> show log [max-lines <uint16>] [service <identityref>] [vrf <string>] [facility FACILITY] \
...            level [EQUAL] [greater-or-equal GREATER-OR-EQUAL] not [LEVEL]

Print log.

Input Parameters¶

max-lines <uint16>

Log max lines.

service <identityref>

Filter logs by service.

vrf <string>

Filter logs by VRF.

facility FACILITY

Filter logs by facility.

`FACILITY` values	Description
kernel	Filter kernel messages.
mail	Filter mail system messages.
news	Filter network news subsystem messages.
user	Filter random user-level messages.
auth	Filter security/authorization messages.
authpriv	Filter security/authorization messages (private).
cron	Filter clock daemon messages.
daemon	Filter system daemons messages.
line-printer	Filter line printer subsystem messages.
FTP	Filter FTP daemon messages.
syslog	Filter messages generated internally by the syslog daemon.
uucp	Filter UUCP subsystem messages.
local0	Filter messages from local0.
local1	Filter messages from local1.
local2	Filter messages from local2.
local3	Filter messages from local3.
local4	Filter messages from local4.
local5	Filter messages from local5.
local6	Filter messages from local6.
local7	Filter messages from local7.
any	Filter messages from any facilities.

level

Filter logs by level.

EQUAL

Select levels to show.

`EQUAL` values	Description
emergency	System is unusable.
alert	Action must be taken immediately.
critical	Critical conditions.
error	Error conditions.
warning	Warning conditions.
notice	Normal but significant condition.
info	Informational messages.
debug	Debug-level messages.
any	Show all messages from this facility.

greater-or-equal GREATER-OR-EQUAL

Filter messages with a greater or equal level than the selected one.

`GREATER-OR-EQUAL` values	Description
emergency	System is unusable.
alert	Action must be taken immediately.
critical	Critical conditions.
error	Error conditions.
warning	Warning conditions.
notice	Normal but significant condition.
info	Informational messages.
debug	Debug-level messages.

not

Select levels to not show.

LEVEL

Do not show messages with this level.

`LEVEL` values	Description
emergency	System is unusable.
alert	Action must be taken immediately.
critical	Critical conditions.
error	Error conditions.
warning	Warning conditions.
notice	Normal but significant condition.
info	Informational messages.
debug	Debug-level messages.

show ntp¶

vsr> show ntp [vrf <string>] [details]

Show NTP information.

Input Parameters¶

vrf <string>: VRF to look into.
details: Show per server details.

Output Data¶

enabled true|false

Enable or disable the NTP protocol and indicates that the system should attempt to synchronize the system clock with an NTP server from the servers defined in the ‘ntp/server’ list.

server

List of NTP servers to use for system clock synchronization. If ‘/system/ntp/enabled’ is ‘true’, then the system will attempt to contact and utilize the specified NTP servers.

address ADDRESS

The address or hostname of the NTP server.

`ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
<host-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.

version <uint8>

Version number to put in outgoing NTP packets.

association-type ASSOCIATION-TYPE

The desired association type for this NTP server.

`ASSOCIATION-TYPE` values	Description
SERVER	Use client association mode. This device will not provide synchronization to the configured NTP server.
PEER	Use symmetric active association mode. This device may provide synchronization to the configured NTP server.
POOL	Use client association mode with one or more of the NTP servers found by DNS resolution of the domain name given by the ‘address’ leaf. This device will not provide synchronization to the servers.
LOCAL-CLOCK	Use a local reference clock.
INVALID	Invalid use of the client/symmetric active association mode. This device can not be synchronized or provide synchronization to the servers.

iburst true|false

Indicates whether this server should enable burst synchronization or not.

prefer true|false

Indicates whether this server should be preferred or not.

stratum <uint8>

Indicates the level of the server in the NTP hierarchy. As stratum number increases, the accuracy is degraded. Primary servers are stratum while a maximum value of 16 indicates unsynchronized. The values have the following specific semantics: | 0 | unspecified or invalid | 1 | primary server (e.g., equipped with a GPS receiver) | 2-15 | secondary server (via NTP) | 16 | unsynchronized | 17-255 | reserved.

root-delay <uint32>

The round-trip delay to the server, in milliseconds.

root-dispersion <uint64>

Dispersion (epsilon) represents the maximum error inherent in the measurement.

offset <uint64>

Estimate of the current time offset from the peer. This is the time difference between the local and reference clock.

poll-interval <uint32>

Polling interval of the peer.

synchronized true|false

True if we are synchronized with this server.

state STATE

The server status in the clock selection process.

`STATE` values	Description
rejected	Not synchronized. Indicates sources to which connectivity has been lost or whose packets do not pass all tests.
falsetick	Not synchronized. Indicates a clock which chronyd thinks is a falseticker (i.e. its time is inconsistent with a majority of other sources).
candidate	Not synchronized. Indicates acceptable sources which are combined with the selected source.
system-peer	Synchronized. Indicates the source to which chronyd is currently synchronized.
excluded	Not synchronized. Indicates acceptable sources which are excluded by the combining algorithm.
inconsistent	Not synchronized. Indicates a source whose time appears to have too much variability.

auth-key-id <uint16>

Integer identifier used by the client and server to designate a secret key. The client and server must use the same key id.

show ntp clients¶

vsr> show ntp clients [vrf <string>] [l3vrf <string>]

Show connected NTP clients.

Input Parameters¶

vrf <string>: VRF to look into.
l3vrf <string>: Specify the l3vrf.

Output Data¶

client

NTP client records.

host HOST

Client host.

`HOST` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.
<host-name>	The domain-name type represents a DNS domain name. Fully quallified left to the models which utilize this type. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section 2.1 of RFC 1123). The pattern above is intended to allow for current practice in domain name use, and some possible future expansion. It is designed to hold various types of domain names, including names used for A or AAAA records (host names) and other records, such as SRV records. Note that Internet host names have a stricter syntax (described in RFC 952) than the DNS recommendations in RFCs 1034 and 1123, and that systems that want to store host names in schema nodes using the domain-name type are recommended to adhere to this stricter standard to ensure interoperability. The encoding of DNS names in the DNS protocol is limited to 255 characters. Since the encoding consists of labels prefixed by a length bytes and there is a trailing NULL byte, only 253 characters can appear in the textual dotted notation. Domain-name values use the US-ASCII encoding. Their canonical format uses lowercase US-ASCII characters. Internationalized domain names MUST be encoded in punycode as described in RFC 3492.

ntp-packets <uint32>

Number of NTP packets sent to the server.

dropped-ntp-packets <uint32>

Number of dropped NTP packets to limit response rate.

last-ntp-packet-time <uint32>

Time since the last NTP packet was received.

cmd-packets <uint32>

Number of command packets received from the client.

dropped-cmd-packets <uint32>

Number of command packets dropped to limit response rate.

last-cmd-packet-time <uint32>

Time since the last command packet was received.

show dhcp-server¶

Note

requires a Product License.

vsr> show dhcp-server [vrf <string>] [l3vrf <string>]

Show DHCP server leases.

Input Parameters¶

vrf <string>: Specify the VRF.
l3vrf <string>: Specify the l3vrf.

show neighbors¶

Note

requires a Product License.

vsr> show neighbors [FAMILY] [vrf <string>] [interface <ifname>]

Show neighbors information.

Input Parameters¶

FAMILY

Display only this layer 3 family.

`FAMILY` values	Description
ipv4	IPv4 only.
ipv6	IPv6 only.
<string>	No description.

vrf <string>

The VRF in which to show the neighbors.

interface <ifname>

Interface name.

Output Data¶

neighbor

Neighbor entries in ARP table.

neighbor <string>: IPv4 or IPv6 address.
interface <string>: Interface name.
state <string>: System state (REACHABLE/PERMANENT/STATE/DELAY).
link-layer-address <string>: The link-layer address.

show conntracks¶

vsr> show conntracks [vrf <string>] [family FAMILY] [protocol PROTOCOL]

Show conntracks.

Input Parameters¶

vrf <string>

The VRF in which to show the conntracks.

family FAMILY

Display only this layer 3 family.

`FAMILY` values	Description
ipv4	IPv4 only.
ipv6	IPv6 only.
<string>	No description.

protocol PROTOCOL

Display only this layer 4 protocol.

`PROTOCOL` values	Description
tcp	TCP only.
udp	UDP only.
<string>	No description.

show product¶

vsr> show product [name] [version]

Show the product name and version.

Input Parameters¶

name: Display the product name.
version: Display the product version.

show fast-path cpu-usage¶

Note

requires a Product License.

vsr> show fast-path cpu-usage

Show the fast path CPU usage.

show fast-path table-usage¶

Note

requires a Product License.

vsr> show fast-path table-usage

Show the fastpath table usage.

show fast-path statistics¶

Note

requires a Product License.

vsr> show fast-path statistics [all] [TYPE]

Show fast-path statistics.

Input Parameters¶

all

Show all fast-path services statistics.

TYPE

Show fast-path services statistics.

`TYPE` values	Description
ipv4	Show ipv4 fast-path service statistics.
ipv6	Show ipv6 fast-path service statistics.
vxlan	Show vxlan fast-path service statistics.
vlan	Show vlan fast-path service statistics.
bridge	Show bridge fast-path service statistics.
lag	Show lag fast-path service statistics.
gre	Show GRE fast-path service statistics.
pppoe	Show PPPoE fast-path service statistics.
mpls	Show MPLS fast-path service statistics.
global	Show global fast-path service statistics.
interface	Show interface fast-path service statistics.
exception	Show exception fast-path service statistics.
qos-sched	Show QoS scheduler fast-path service statistics.
qos-rate-limit	Show QoS rate limit fast-path service statistics.

Output Data¶

ipv4

IPv4 service statistics.

ip-forwarded-datagrams <uint64>: Number of IP packets forwarded (IpForwDatagrams).
ip-in-delivered <uint64>: Number of IP packets delivered to user-protocols (IpInDelivers).
ip-in-received <uint64>: Number of IP packets received (IpInReceives).
ip-in-truncated-packets <uint64>: Number of IP packets discarded due to a truncate IP header (IpInTruncatedPkts).
ip-in-address-errors <uint64>: Number of IP packets discarded due to invalid IP address (IpInAddrErrors).
ip-in-header-errors <uint64>: Number of IP packets discarded due to errors in header (IpInHdrErrors).
ip-fragment-created <uint64>: Number of IP fragment packets created on fragmentation processing (IpFragCreates).
ip-fragment-ok <uint64>: Number of IP fragment packets sent successfully (IpFragOKs).
ip-fragment-failures <uint64>: Number of IP packets discarded due to failures during fragmentation processing (IpFragFails).
ip-reassembly-ok <uint64>: Number of IP packets successfully reassembled (IpReasmOKs).
ip-reassembly-required <uint64>: Number of IP fragments packets submitted to reassembly processing (IpReasmReqds).
ip-reassembly-exceptions <uint64>: Number of IP fragment packets sent in exception path (IpReasmExceptions).
ip-reassembly-failures <uint64>: Number of IP packets discarded due to failures during reassembly processing (IpReasmFails).
ip-reassembly-dropped-duplicate <uint64>: Number of IP packets dropped during reassembly considered as duplicate (IpReasmDroppedDuplicate).
ip-reassembly-dropped-session-complete <uint64>: Number of IP packets dropped during reassembly because the session is complete (IpReasmDroppedSessionComplete).
ip-reassembly-dropped-session-full <uint64>: Number of IP packets dropped during reassembly because the session is already full (IpReasmDroppedSessionAlreadyFull).
ip-reassembly-error-header-encapsulation <uint64>: Number of IP packets discarded during reassembly due to header encapsulation error (IpReasmErrorHeaderEncap).
ip-reassembly-error-ip-option-unsupported <uint64>: Number of IP packets discarded during reassembly due to unsupported IP option (IpReasmErrorIPOptionUnsupported).
ip-reassembly-error-last-already-received <uint64>: Number of IP packets discarded during reassembly due to receive twice the last fragment (IpReasmErrorLastAlreadyReceived).
ip-reassembly-error-offset-too-large <uint64>: Number of IP packets discarded during reassembly with offset due to an offset too big (IpReasmErrorOffsetTooLarge).
ip-reassembly-error-overlap-next <uint64>: Number of IP packets discarded during reassembly due to receive overlapping fragment with next one (IpReasmErrorOverlapNext).
ip-reassembly-error-overlap-previous <uint64>: Number of IP packets discarded during reassembly due to receive overlapping fragment with previous one (IpReasmErrorOverlapPrevious).
ip-reassembly-error-packet-too-short <uint64>: Number of IP packets discarded during reassembly due to reception of a too short fragment (IpReasmErrorPacketTooShort).
ip-reassembly-error-queue-allocation <uint64>: Number of IP packets discarded during reassembly due to reassembly queue allocation failure (IpReasmErrorQueueAlloc).
ip-reassembly-error-queue-full <uint64>: Number of IP packets discarded during reassembly due to reassembly queue full (too many fragments have been received) (IpReasmErrorQueueFull).
ip-reassembly-error-size-exceed <uint64>: Number of IP packets discarded during reassembly due to total received bytes greater than the maximal authorized value (65535) (IpReasmErrorSizeExceed).
ip-reassembly-error-size-overflow <uint64>: Number of IP packets discarded during reassembly due to total received bytes greater than the expected value (IpReasmErrorSizeOverflow).
ip-reassembly-error-too-many-segments <uint64>: Number of IP packets discarded during reassembly due to too many segments in IP packets (IpReasmErrorTooManySegments).
ip-reassembly-timeout <uint64>: Number of IP packets discarded due to timeout in reassembly processing (IpReasmTimeout).
ip-checksum-errors <uint64>: Number of IP packets discarded due to an invalid checksum (IpCsumErrors).
ip-dropped-blackhole <uint64>: Number of IP packets discarded due to matching blackhole route (IpDroppedBlackhole).
ip-dropped-filtering <uint64>: Number of IP packets discarded by filtering processing (IpDroppedNetfilter).
ip-dropped-forwarding <uint64>: Number of IP packets discarded due to forwarding being disabled (IpDroppedForwarding).
ip-dropped-invalid-interface <uint64>: Number of IP packets discarded due to invalid outgoing interface (IpDroppedInvalidInterface).
ip-dropped-ipsec <uint64>: Number of IP packets discarded by IPsec processing (IpDroppedIPsec).
ip-dropped-no-arp <uint64>: Number of IP packets discarded due to missing ARP resolution (IpDroppedNoArp).
ip-dropped-no-memory <uint64>: Number of IP packets discarded due to memory allocation errors (IpDroppedNoMemory).
ip-dropped-out-operative <uint64>: Number of IP packets discarded because the outgoing interface is down (IPDroppedOutOperative).
ip-dropped-route-exception <uint64>: Number of IP packets sent to exception due to specific route (IpDroppedRouteException).
ip-nhrp-packet <uint64>: Number of IP NHRP packets (IpNhrpPacket).
ip-nhrp-error-send <uint64>: Number of discarded sent IP NHRP packets (IpNhrpErrorSend).

ipv6

IPv6 service statistics.

ip6-forwarded-datagrams <uint64>: Number of IPv6 packets forwarded (IpForwDatagrams).
ip6-in-delivered <uint64>: Number of IPv6 packets delivered to user-protocols (IpInDelivers).
ip6-in-received <uint64>: Number of IPv6 packets received (IpInReceives).
ip6-in-truncated-packets <uint64>: Number of IPv6 packets discarded due to a truncate IP header (IpInTruncatedPkts).
ip6-in-address-errors <uint64>: Number of IPv6 packets discarded due to invalid IPv6 address (IpInAddrErrors).
ip6-in-header-errors <uint64>: Number of IPv6 packets discarded due to errors in header (IpInHdrErrors).
ip6-fragment-created <uint64>: Number of IPv6 fragment packets created on fragmentation processing (IpFragCreates).
ip6-fragment-ok <uint64>: Number of IPv6 fragment packets sent successfully (IpFragOKs).
ip6-fragment-failures <uint64>: Number of IPv6 packets discarded due to failures during fragmentation processing (IpFragFails).
ip6-fragment-reassembly-exceptions <uint64>: Number of IP fragment packets sent in exception path.
ip6-reassembly-ok <uint64>: Number of IPv6 packets successfully reassembled (IpReasmOKs).
ip6-reassembly-required <uint64>: Number of IPv6 fragments packets submitted to reassembly processing (IpReasmReqds).
ip6-reassembly-exceptions <uint64>: Number of IPv6 fragment packets sent in exception path (IpReasmExceptions).
ip6-reassembly-failures <uint64>: Number of IPv6 packets discarded due to failures during reassembly processing (IpReasmFails).
ip6-reassembly-dropped-session-complete <uint64>: Number of IPv6 packets dropped during reassembly because the session is complete (IpReasmDroppedSessionComplete).
ip6-reassembly-dropped-session-full <uint64>: Number of IPv6 packets dropped during reassembly because the session is already full (IpReasmDroppedSessionAlreadyFull).
ip6-reassembly-error-fragment-header <uint64>: Number of IPv6 packets discarded during reassembly due to header reading error (IpReasmErrorFragmentHeader).
ip6-reassembly-error-header-encapsulation <uint64>: Number of IPv6 packets discarded during reassembly due to header encapsulation error (IpReasmErrorHeaderEncap).
ip6-reassembly-error-ip6-option-too-large <uint64>: Number of IPv6 packets discarded during reassembly due to IPv6 option too large (IpReasmErrorIPOptionTooLarge).
ip6-reassembly-error-last-already-received <uint64>: Number of IPv6 packets discarded during reassembly due to receive twice the last fragment (IpReasmErrorLastAlreadyReceived).
ip6-reassembly-error-offset-too-large <uint64>: Number of IPv6 packets discarded during reassembly with offset due to an offset too big (IpReasmErrorOffsetTooLarge).
ip6-reassembly-error-overlap-next <uint64>: Number of IPv6 packets discarded during reassembly due to receive overlapping fragment with next one (IpReasmErrorOverlapNext).
ip6-reassembly-error-overlap-previous <uint64>: Number of IPv6 packets discarded during reassembly due to receive overlapping fragment with previous one (IpReasmErrorOverlapPrevious).
ip6-reassembly-error-packet-too-short <uint64>: Number of IPv6 packets discarded during reassembly due to reception of a too short fragment (IpReasmErrorPacketTooShort).
ip6-reassembly-error-queue-allocation <uint64>: Number of IPv6 packets discarded during reassembly due to reassembly queue allocation failure (IpReasmErrorQueueAlloc).
ip6-reassembly-error-queue-full <uint64>: Number of IPv6 packets discarded during reassembly due to reassembly queue full (too many fragments have been received) (IpReasmErrorQueueFull).
ip6-reassembly-error-size-exceed <uint64>: Number of IPv6 packets discarded during reassembly due to total received bytes greater than the maximal authorized value (65535) (IpReasmErrorSizeExceed).
ip6-reassembly-error-size-overflow <uint64>: Number of IPv6 packets discarded during reassembly due to total received bytes greater than the expected value (IpReasmErrorSizeOverflow).
ip6-reassembly-error-too-many-segments <uint64>: Number of IPv6 packets discarded during reassembly due to too many segments in IP packets (IpReasmErrorTooManySegments).
ip6-reassembly-timeout <uint64>: Number of IPv6 packets discarded due to timeout in reassembly processing (IpReasmTimeout).
ip6-dropped-blackhole <uint64>: Number of IPv6 packets discarded due to matching blackhole route (IpDroppedBlackhole).
ip6-dropped-filtering <uint64>: Number of IPv6 packets discarded by filtering processing (IpDroppedNetfilter).
ip6-dropped-forwarding <uint64>: Number of IPv6 packets discarded due to forwarding being disabled (IpDroppedForwarding).
ip6-dropped-invalid-interface <uint64>: Number of IPv6 packets discarded due to invalid outgoing interface (IpDroppedInvalidInterface).
ip6-dropped-ipsec <uint64>: Number of IPv6 packets discarded by IPsec processing (IpDroppedIPsec).
ip6-dropped-no-arp <uint64>: Number of IPv6 packets discarded due to missing ARP resolution (IpDroppedNoArp).
ip6-dropped-no-memory <uint64>: Number of IPv6 packets discarded due to memory allocation errors (IpDroppedNoMemory).
ip6-dropped-out-operative <uint64>: Number of IPv6 packets discarded because the outgoing interface is down (IPDroppedOutOperative).
ip6-dropped-route-exception <uint64>: Number of IPv6 packets sent to exception due to specific route (IpDroppedRouteException).
ip6-nhrp-packet <uint64>: Number of IPv6 NHRP packets (IpNhrpPacket).
ip6-nhrp-error-send <uint64>: Number of discarded sent IPv6 NHRP packets (IpNhrpErrorSend).

vxlan

VXLAN service statistics.

vxlan-dropped-header-too-short <uint64>: Number of input packets dropped in VXLAN due to a VXLAN header too short (VxlanDroppedHeaderTooShort).
vxlan-dropped-in-operative <uint64>: Number of input packets dropped in VXLAN because the incoming interface is down (VxlanDroppedInOperative).
vxlan-dropped-invalid-ip-family <uint64>: Number of output packets dropped in VXLAN due to a failure to get the VXLAN header (VxlanDroppedInvalidIpFamily).
vxlan-dropped-invalid-ipv4-checksum <uint64>: Number of input packets dropped in IPv4 VXLAN due to an invalid checksum (VxlanDroppedInvalidIPv4Csum).
vxlan-dropped-invalid-ipv4-header <uint64>: Number of input packets dropped in IPv4 VXLAN due to a failure to get the VXLAN header (VxlanDroppedInvalidIPv4Header).
vxlan-dropped-invalid-ipv6-checksum <uint64>: Number of input packets dropped in IPv4 VXLAN due to an invalid checksum (VxlanDroppedInvalidIPv6Csum).
vxlan-dropped-invalid-ipv6-header <uint64>: Number of input packets dropped in IPv6 VXLAN due to a failure to get the VXLAN header (VxlanDroppedInvalidIPv6Header).
vxlan-dropped-ipv4-no-destination <uint64>: Number of output packets dropped in IPv4 VXLAN due to a null destination address (VxlanDroppedIPv4NoDst).
vxlan-dropped-ipv6-no-destination <uint64>: Number of output packets dropped in IPv6 VXLAN due to a null destination address (VxlanDroppedIPv6NoDst).
vxlan-dropped-ovs-no-destination <uint64>: Number of output packets dropped in OVS VXLAN due to a null destination address (VxlanDroppedOvsNoDst).
vxlan-dropped-prepend-ipv4-failure <uint64>: Number of output packets dropped in IPv4 VXLAN due to add IP header (VxlanDroppedPrependIPv4Failure).
vxlan-dropped-prepend-ipv6-failure <uint64>: Number of output packets dropped in IPv6 VXLAN due to add IP header (VxlanDroppedPrependIPv6Failure).
vxlan-dropped-prepend-ovs-failure <uint64>: Number of output packets dropped in OVS VXLAN due to add IP header (VxlanDroppedPrependOvsFailure).
vxlan-dropped-unknown-iface <uint64>: Number of input packets dropped in VXLAN due to an invalid interface (VxlanDroppedUnknownIface).
vxlan-dropped-unknown-vni <uint64>: Number of input packets dropped in VXLAN due to an invalid VNI (VxlanDroppedUnknownVNI).
vxlan-exception-i-flag-not-set <uint64>: Number of input packets sent to exception by VXLAN due a I flags not set (see rfc 7348) (VxlanExceptionIFlagNotSet).
vxlan-exception-ipv4-mtu-exceeded <uint64>: Number of output packets sent to exception by IPv4 VXLAN due a MTU exceeded the authorized value (VxlanExceptionIPv4MtuExceeded).
vxlan-exception-ipv4-no-multicast-source <uint64>: Number of output packets sent to exception by IPv4 VXLAN due to no valid src address found for a multicast packet (VxlanExceptionIPv4NoMcastSrc).
vxlan-exception-ipv4-route <uint64>: Number of output packets sent to exception by IPv4 VXLAN due to specific route (VxlanExceptionIPv4Route).
vxlan-exception-ipv6-mtu-exceeded <uint64>: Number of output packets sent to exception by IPv6 VXLAN due a MTU exceeded the authorized value (VxlanExceptionIPv6MtuExceeded).
vxlan-exception-ipv6-no-multicast-source <uint64>: Number of output packets sent to exception by IPv6 VXLAN due to no valid src address found for a multicast packet (VxlanExceptionIPv6NoMcastSrc).
vxlan-exception-ipv6-route <uint64>: Number of output packets sent to exception by IPv6 VXLAN due to specific route (VxlanExceptionIPv6Route).
vxlan-exception-no-input-fdb <uint64>: Number of input packets sent to exception by VXLAN due to no valid fdb found (VxlanExceptionNoInputFdb).
vxlan-exception-no-output-fdb <uint64>: Number of output packets sent to exception by VXLAN due to no valid fdb found (VxlanExceptionNoOutputFdb).
vxlan-exception-no-remote <uint64>: Number of output packets sent to exception by VXLAN due to no remote found (VxlanExceptionNoRemote).
vxlan-exception-ovs-mtu-exceeded <uint64>: Number of output packets sent to exception by Ovs VXLAN due a MTU exceeded the authorized value (VxlanExceptionOvsMtuExceeded).
vxlan-exception-ovs-route <uint64>: Number of output packets sent to exception by Ovs VXLAN due to specific route (VxlanExceptionOvsRoute).
vxlan-exception-too-many-flags <uint64>: Number of input packets sent to exception by VXLAN due to a presence of an unsupported flag (neither I and G ones, see rfc 7348) (VxlanExceptionTooManyFlags).
vxlan-fdb-forwarding-duplicate-error <uint64>: Number of failure to duplicate a packet for fdb forwarding (VxlanFdbForwDuplicateError).

vlan

VLAN service statistics.

vlan-dropped-in-operative <uint64>: Number of input packets dropped in VLAN because the incoming interface is down (VlanDroppedInOperative).
vlan-dropped-input-unknown-interface <uint64>: Number of input packets dropped in VLAN due to unknown interface (VlanDroppedInputUnknownIf).
vlan-dropped-invalid-tag <uint64>: Number of input packets dropped in VLAN due to an invalid tag (VlanDroppedInvalidTag).
vlan-dropped-out-operative <uint64>: Number of output packets dropped in VLAN because the outgoing interface is down (VlanDroppedOutOperative).
vlan-dropped-prepend-failure <uint64>: Number of output packets dropped in VLAN due to a failure to add VLAN tag (VlanDroppedPrependFailure).
vlan-output-unknown-interface <uint64>: Number of output packets with unknown interface (VlanOutputUnknownIf).
vlan-unknown-tag <uint64>: Number of packets with unknown VLAN tag (VlanUnknownTag).

bridge

Bridge service statistics.

l2-forwarded-frames <uint64>: Number of packets forwarded at layer 2 (bridging processing) (L2ForwFrames).
bridge-dropped-forwarding-invalid <uint64>: Number of output packets dropped in bridge due to forbidden forwarding (forwarding disable or originating port) (BridgeDroppedFwdInvalid).
bridge-dropped-input-lookup-error <uint64>: Number of input packets dropped in bridge due to a lookup error (BridgeDroppedInputLookupError).
bridge-dropped-invalid-output-port <uint64>: Number of output packets dropped in bridge because output port index is invalid (BridgeDroppedInvalidOutPort).
bridge-dropped-invalid-source <uint64>: Number of input packets dropped in bridge due to invalid mac source (BridgeDroppedInvalidSrc).
bridge-dropped-invalid-state <uint64>: Number of input packets dropped in bridge due to invalid state (not learning or forwarding) of the bridge (BridgeDroppedInvalidState).
bridge-dropped-learning <uint64>: Number of output packets dropped in bridge while it is in learning state (BridgeDroppedLearning).
bridge-dropped-mtu-exceeded <uint64>: Number of output packets dropped in bridge due to MTU greater than the authorized one (BridgeDroppedMtuExceeded).
bridge-dropped-no-output-port <uint64>: Number of output packets dropped in bridge due to no valid output (BridgeDroppedNoOutputPort).
bridge-dropped-output-lookup-error <uint64>: Number of output packets dropped in bridge due to a lookup error (BridgeDroppedOutputLookupError).
bridge-dropped-out-operative <uint64>: Number of output packets dropped in bridge because the outgoing interface is down (BridgeDroppedOutOperative).
bridge-dropped-output-unknown <uint64>: Number of output packets dropped in bridge due to an unknown output (BridgeDroppedOutputUnknown).
bridge-dropped-pause-frame <uint64>: Number of input packets dropped in bridge because it is a pause frame (BridgeDroppedPauseFrame).
bridge-dropped-unknown-interface <uint64>: Number of input packets dropped in bridge due to an invalid interface (BridgeDroppedUnknownIface).
bridge-fdb-synchronization-error <uint64>: Number of packets dropped in bridge due to fdb synchronization error (BridgeFdbSyncError).

lag

Lag service statistics.

lag-dropped-inactive-port <uint64>: Number of LAG dropped inactive ports (LagDroppedInactivePort).

gre

GRE service statistics.

gre-dropped-init-gre-ipv4-header-failure <uint64>: Number of output packets dropped in GRE due to a failure to add the GRE header (GREDroppedInitGreIPv4HeaderFailure).
gre-dropped-init-gre-ipv6-header-failure <uint64>: Number of output packets dropped in GRE6 due to a failure to add the GRE header (GREDroppedInitGreIPv6HeaderFailure).
gre-dropped-init-ipv4-header-failure <uint64>: Number of output packets dropped in GRE due to a failure to add the IPv4 header (GREDroppedInitIPv4HeaderFailure).
gre-dropped-init-ipv6-header-failure <uint64>: Number of output packets dropped in GRE due to a failure to add the IPv4 header (GREDroppedInitIPv6HeaderFailure).
gre-dropped-in-operative <uint64>: Number of input packets dropped in GRE because the ingoing interface is down (GREDroppedInOperative).
gre-dropped-missing-checksum <uint64>: Number of input packets dropped in GRE due to a missing checksum (GREDroppedMissingChecksum).
gre-dropped-out-operative <uint64>: Number of output packets dropped in GRE because the outgoing interface is down (GREDroppedOutOperative).
gre-dropped-parse-ipv4-header-failure <uint64>: Number of input packets dropped in GRE due to failure to parse IPv4 header (GREDroppedParseIPv4HeaderFailure).
gre-dropped-parse-ipv6-header-failure <uint64>: Number of input packets dropped in GRE due to failure to parse IPv6 header (GREDroppedParseIPv6HeaderFailure).
gre-dropped-pullup-ipv4-header-failure <uint64>: Number of input packets dropped in IPv4 GRE due to pullup failure on gre header (GREDroppedPullupIPv4HeaderFailure).
gre-dropped-pullup-ipv6-header-failure <uint64>: Number of input packets dropped in IPv6 GRE due to pullup failure on gre header (GREDroppedPullupIPv6HeaderFailure).
gre-dropped-unexpected-checksum <uint64>: Number of input packets dropped in GRE due to an unexpected checksum (GREDroppedUnexpectedChecksum).
gre-dropped-wrong-checksum <uint64>: Number of input packets dropped in GRE due to an incorrect checksum (GREDroppedWrongChecksum).
gre-exception-input-unsupported-protocol <uint64>: Number of input packets sent to exception by GRE due to unsupported GRE protocol (GREExceptionInputUnsupportedProtocol).
gre-exception-ipv4-route <uint64>: Number of output packets sent to exception by GRE due to specific route (for IPv4 packet) (GREExceptionIPv4Route).
gre-exception-ipv4-source-select-failed <uint64>: Number of output packets sent to exception by GRE due to no src address can be set (for IPv4 packet) (GREExceptionIPv4SourceSelectFailed).
gre-exception-ipv6-route <uint64>: Number of output packets sent to exception by GRE due to specific route (for IPv6 packet) (GREExceptionIPv6Route).
gre-exception-output-unsupported-protocol <uint64>: Number of output packets sent to exception by GRE due to unsupported GRE protocol (GREExceptionOutputUnsupportedProtocol).
gre-exception-unknown-iface <uint64>: Number of output packets sent to exception by GRE due to an invalid GRE interface id (GREExceptionUnknownIface).
gre-exception-unsupported-ethernet-type <uint64>: Number of output packets sent to exception by GRE due to unsupported ethernet type (GREExceptionUnsupportedEtherType).
gre-invalid-header <uint64>: Number of input packets not managed by GRE due to routing flags set (see rfc 1701) or version number different to 0. The packet can be dropped or sent to exception later in other fast path processing part (GREInvalidHeader).
gre-protocol-not-supported <uint64>: Number of input packets not supported by GRE (GREProtocolNotSupported).
gretap-dropped-out-operative <uint64>: Number of output packets dropped in GRETAP because the outgoing interface is down (GRETAPDroppedOutOperative).
gretap-exception-unknown-iface <uint64>: Number of output packets sent to exception by GRETAP due to an invalid GRE interface id (GRETAPExceptionUnknownIface).

mpls

MPLS service statistics.

mpls-forwarding <uint64>: Number of forwarding packets in MPLS (MplsForwarding).
mpls-input <uint64>: Number of input packets in MPLS (MplsInput).
mpls-no-route <uint64>: Number of packets in MPLS with no route (MplsNoRoute).
mpls-push <uint64>: Number of push packets in MPLS (MplsPush).
mpls-in-header-errors <uint64>: Number of packets in MPLS discarded due to errors in header (MplsInHdrErrors).
mpls-received-dropped <uint64>: Number of received dropped packets in MPLS (MplsRxDrop).
mpls-dropped-invalid-interface <uint64>: Number of packets dropped in MPLS due to invalid outgoing interface (MplsDroppedInvalidInterface).
mpls-dropped-mtu <uint64>: Number of packets dropped in MPLS due to MTU greater than the authorized one (MplsDroppedMtu).
mpls-dropped-no-memory <uint64>: Number of packets dropped in MPLS due to memory allocation errors (MplsDroppedNoMem).
mpls-dropped-no-neighbor <uint64>: Number of dropped packets in MPLS due to no neighbor is found (MplsDroppedNoNeigh).
mpls-dropped-ttl-exceed <uint64>: Number of packets dropped in MPLS due to ttl exceeded (MplsDroppedTtlExceed).

global

Global service statistics.

fast-path-dropped <uint64>: Number of packets dropped by fast path (fp_dropped).
fast-path-dropped-arp <uint64>: Number of packets dropped by fast path in ARP (fp_dropped_arp).
fast-path-dropped-bonding <uint64>: Number of packets dropped by fast path in bonding (fp_dropped_bonding).
fast-path-dropped-bridge <uint64>: Number of packets dropped by fast path in bridge (fp_dropped_bridge).
fast-path-dropped-ebtables <uint64>: Number of packets dropped by fast path in layer 2 filtering (fp_dropped_ebtables).
fast-path-dropped-ethernet <uint64>: Number of packets dropped by fast path at the generic ethernet layer (fp_dropped_ether).
fast-path-dropped-exception <uint64>: Number of packets dropped by fast path in exception path (fp_dropped_excp).
fast-path-dropped-exception-loop <uint64>: Number of packets dropped by fast path due to exception loop (fp_dropped_excloop).
fast-path-dropped-filtering <uint64>: Number of packets dropped by fast path in IPv4 filtering (fp_dropped_netfilter).
fast-path-dropped-filtering-ipv6 <uint64>: Number of packets dropped by fast path in IPv6 filtering (fp_dropped_netfilter6).
fast-path-dropped-gre <uint64>: Number of packets dropped by fast path in GRE (fp_dropped_gre).
fast-path-dropped-ip <uint64>: Number of packets dropped by fast path in generic IPv4 (fp_dropped_ip).
fast-path-dropped-ipsec <uint64>: Number of packets dropped by fast path in IPv4 IPsec (fp_dropped_ipsec).
fast-path-dropped-ipsec-ipv6 <uint64>: Number of packets dropped by fast path in IPv6 IPsec (fp_dropped_ipsec6).
fast-path-dropped-ipv6 <uint64>: Number of packets dropped by fast path in generic IPv6 (fp_dropped_ipv6).
fast-path-dropped-macvlan <uint64>: Number of packets dropped by fast path in MACVLAN (fp_dropped_macvlan).
fast-path-dropped-mpls <uint64>: Number of packets dropped by fast path in MultiProtocol Label Switching (fp_dropped_mpls).
fast-path-dropped-multicast <uint64>: Number of packets dropped by fast path in IPv4 multicast (fp_dropped_mcast).
fast-path-dropped-multicast-ipv6 <uint64>: Number of packets dropped by fast path in IPv6 multicast (fp_dropped_mcast6).
fast-path-dropped-npf <uint64>: Number of packets dropped by fast path in Network Address Translation and Carrier-grade NAT (fp_dropped_npf).
fast-path-dropped-ovs <uint64>: Number of packets dropped by fast path in Open vSwitch (fp_dropped_ovs).
fast-path-dropped-plugins <uint64>: Number of packets dropped by fast path in plugin (fp_dropped_plugins).
fast-path-dropped-qos <uint64>: Number of packets dropped by fast path in QoS (fp_dropped_qos).
fast-path-dropped-reassembly <uint64>: Number of packets dropped by fast path in IPv4 reassembly (fp_dropped_reasm).
fast-path-dropped-reassembly-ipv6 <uint64>: Number of packets dropped by fast path in IPv6 reassembly (fp_dropped_reasm6).
fast-path-dropped-system <uint64>: Number of packets dropped by fast path in internal processing (fp_dropped_system).
fast-path-dropped-tc <uint64>: Number of packets dropped by fast path in generic traffic conditioning (fp_dropped_tc).
fast-path-dropped-tc-erl <uint64>: Number of packets dropped by fast path in traffic conditioning by exception rate limitation (fp_dropped_tc_erl).
fast-path-dropped-tunnel <uint64>: Number of packets dropped by fast path in IPinIP tunnel (fp_dropped_tunnel).
fast-path-dropped-vethernet <uint64>: Number of packets dropped by fast path in vEthernet (fp_dropped_veth).
fast-path-dropped-vlan <uint64>: Number of packets dropped by fast path in VLAN (fp_dropped_vlan).
fast-path-dropped-vxlan <uint64>: Number of packets dropped by fast path in VXLAN (fp_dropped_vxlan).
fast-path-missing-ipsec-license <uint64>: Number of packets dropped in fast path due to missing ipsec license (fp_missing_ipsec_license).
fast-path-missing-product-license <uint64>: Number of packets dropped in fast path due to missing product license (fp_missing_product_license).

interface

Interface statistics.

name <string>: Interface name.
accelerated true|false: True if the interface is managed by the fast-path, else false.
input-bytes <uint64>: The number of input received bytes (ifs_ibytes).
input-errors <uint64>: The number of input received errors (ifs_ierrors).
input-last-error <uint64>: The number of input received last errors (ifs_ilasterror).
input-multicasts <uint64>: The number of input received multicast packets (ifs_imcasts).
input-no-mbuf <uint64>: The number of input packets dropped because no mbuf was available (ifs_inombuf).
input-packets <uint64>: The number of input received packets (ifs_ipackets).
missed-input-packets <uint64>: The number of missed input packets (ifs_imissed).
multicasts <uint64>: The number of multicasts (ifs_mcasts).
output-bytes <uint64>: The number of output sent bytes (ifs_obytes).
output-errors <uint64>: The number of output sent errors (ifs_oerrors).
output-packets <uint64>: The number of ouput sent packets (ifs_opackets).

exception

Exception service statistics.

exception-by-module

Exceptions by module statistics.

fast-path-exception-bonding <uint64>: Number of packets send in exception in bonding (fp_exception_bonding).
fast-path-exception-bridge <uint64>: Number of packets send in exception in bridge (fp_exception_bridge).
fast-path-exception-ebtables <uint64>: Number of packets send in exception in layer 2 filtering (fp_exception_ebtables).
fast-path-exception-ethernet <uint64>: Number of packets send in exception in generic layer 2 (fp_exception_ether).
fast-path-exception-filtering <uint64>: Number of packets send in exception in IPv4 filtering (fp_exception_netfilter).
fast-path-exception-filtering-ipv6 <uint64>: Number of packets send in exception in IPv6 filtering (fp_exception_netfilter6).
fast-path-exception-gre <uint64>: Number of packets send in exception in GRE (fp_exception_gre).
fast-path-exception-ifnet <uint64>: Number of packets send in exception by a virtual interface (fp_exception_ifnet).
fast-path-exception-ip <uint64>: Number of packets send in exception in generic IPv4 (fp_exception_ip).
fast-path-exception-ipsec <uint64>: Number of packets send in exception in IPv4 IPsec (fp_exception_ipsec).
fast-path-exception-ipsec-ipv6 <uint64>: Number of packets send in exception in IPv6 IPsec (fp_exception_ipsec6).
fast-path-exception-ipv6 <uint64>: Number of packets send in exception in generic IPv6 (fp_exception_ipv6).
fast-path-exception-macvlan <uint64>: Number of packets send in exception in MACVLAN (fp_exception_macvlan).
fast-path-exception-mpls <uint64>: Number of packets send in exception in MPLS (fp_exception_mpls).
fast-path-exception-npf <uint64>: Number of packets send in exception in NPF (fp_exception_npf).
fast-path-exception-reassembly <uint64>: Number of packets send in exception in IPv4 reassembly (fp_exception_reass).
fast-path-exception-sflow <uint64>: Number of packets sent in exception in sflow (fp_exception_sflow).
fast-path-exception-syslog <uint64>: Number of packets send in exception for logging (for system without syslog) (fp_exception_syslog).
fast-path-exception-tap <uint64>: Number of packets send in exception in eBPF (Enhanced Berkeley Packet Filtering), typically when there is a tcpdump or sflow (fp_exception_tap).
fast-path-exception-tunnel <uint64>: Number of packets send in exception in IPinIP tunnel (fp_exception_tunnel).
fast-path-exception-unknown-ifnet <uint64>: Number of packets sent in exception due to unknown ifnet (fp_exception_unknown_ifnet).
fast-path-exception-vethernet <uint64>: Number of packets sent in exception in vEthernet (fp_exception_veth).
fast-path-exception-vlan <uint64>: Number of packets sent in exception in VLAN (fp_exception_vlan).
fast-path-exception-vxlan <uint64>: Number of packets send in exception in VXLAN (fp_exception_vxlan).

exception-dropped-fp-to-linux-add-mark-failure <uint64>

Number of exception packets to Linux dropped due to a tag addition failure (ExcpDroppedFpToLinuxAddMarkFailure).

exception-dropped-fp-to-linux-fptun-failure <uint64>

Number of ExcpDroppedFpToLinuxFptunFailure exceptions (ExcpDroppedFpToLinuxFptunFailure).

exception-dropped-fp-to-linux-no-ipv4-route-local <uint64>

Number of exception packets to Linux dropped due to a failure to find the IPv4 route (ExcpDroppedFpToLinuxNoIPv4RouteLocal).

exception-dropped-fp-to-linux-no-ipv6-route-local <uint64>

Number of exception packets to Linux dropped due to a failure to find the IPv6 route (ExcpDroppedFpToLinuxNoIPv6RouteLocal).

exception-dropped-fp-to-linux-prepend-failure <uint64>

Number of ExcpDroppedFpToLinuxPrependFailure exceptions (ExcpDroppedFpToLinuxPrependFailure).

exception-dropped-fp-to-linux-prepend-failure-detailed

Detailed exceptions of the packets dropped from fast-path to linux with prepend failure.

exception-dropped-fp-to-linux-ecmp-prepend-failure <uint64>: Number of ExcpDroppedFpToLinuxEcmpPrependFailure exceptions (ExcpDroppedFpToLinuxEcmpPrependFailure).
exception-dropped-fp-to-linux-ecmp6-prepend-failure <uint64>: Number of ExcpDroppedFpToLinuxEcmp6PrependFailure exceptions (ExcpDroppedFpToLinuxEcmp6PrependFailure).
exception-dropped-fp-to-linux-eth-fptun-prepend-failure <uint64>: Number of ExcpDroppedFpToLinuxEthFptunPrependFailure exceptions (ExcpDroppedFpToLinuxEthFptunPrependFailure).
exception-dropped-fp-to-linux-eth-prepend-failure <uint64>: Number of ExcpDroppedFpToLinuxEthPrependFailure exceptions (ExcpDroppedFpToLinuxEthPrependFailure).
exception-dropped-fp-to-linux-ipsec-prepend-failure <uint64>: Number of ExcpDroppedFpToLinuxIPsecPrependFailure exceptions (ExcpDroppedFpToLinuxIPsecPrependFailure).
exception-dropped-fp-to-linux-restore-failure <uint64>: Number of ExcpDroppedFpToLinuxRestoreFailure exceptions (ExcpDroppedFpToLinuxRestoreFailure).
exception-dropped-fp-to-linux-tuple-prepend-failure <uint64>: Number of ExcpDroppedFpToLinuxTuplePrependFailure exceptions (ExcpDroppedFpToLinuxTuplePrependFailure).

exception-dropped-invalid-mtag <uint64>

Number of ExcpDroppedInvalidMtag exceptions (ExcpDroppedInvalidMtag).

exception-dropped-linux-to-fp-generic-command-failure <uint64>

Number of packets from Linux dropped due to a FPTUN internal error (ExcpDroppedLinuxToFpGenericCommandFailure).

exception-dropped-linux-to-fp-invalid-port-id <uint64>

Number of packets from Linux dropped due to a reception of a FPTUN message on an unexpected port (ExcpDroppedLinuxToFpInvalidPortId).

exception-dropped-linux-to-fp-invalid-version <uint64>

Number of packets from Linux dropped due to an invalid FPTUN version (ExcpDroppedLinuxToFpInvalidVersion).

exception-dropped-linux-to-fp-ipv4-pullup-failure <uint64>

Number of packets from Linux dropped due to a failure when getting the IPv4 header of the FPTUN message (ExcpDroppedLinuxToFpIPv4PullupFailure).

exception-dropped-linux-to-fp-ipv6-pullup-failure <uint64>

Number of packets from Linux dropped due to a failure when getting the IPv6 header of the FPTUN message (ExcpDroppedLinuxToFpIPv6PullupFailure).

exception-dropped-linux-to-fp-msg-too-short <uint64>

Number of packets from Linux dropped due to an incomplete FPTUN message (ExcpDroppedLinuxToFpMsgTooShort).

exception-dropped-linux-to-fp-no-output-function <uint64>

Number of packets from Linux dropped because no TX function has been registered (ExcpDroppedLinuxToFpNoOutputFunction).

exception-dropped-linux-to-fp-other-host <uint64>

Number of packets from Linux dropped due to a reception of a FPTUN message marked as PACKET_OTHERHOST (ExcpDroppedLinuxToFpOtherHost).

exception-dropped-linux-to-fp-out-operative <uint64>

Number of packets from Linux dropped because the destination interface is down (ExcpDroppedLinuxToFpOutOperative).

exception-dropped-linux-to-fp-tproxy-failure <uint64>

Number of ExcpDroppedLinuxToFpTproxyFailure exceptions (ExcpDroppedLinuxToFpTproxyFailure).

exception-dropped-linux-to-fp-unknown-command <uint64>

Number of packets from Linux dropped due to an invalid FPTUN command (ExcpDroppedLinuxToFpUnknownCommand).

exception-dropped-linux-to-fp-unknown-interface-uid <uint64>

Number of packets from Linux dropped due to an invalid interface id for FPTUN (ExcpDroppedLinuxToFpUnknownIfUid).

exception-dropped-no-conntrack <uint64>

Number of ExcpDroppedNoConntrack exceptions (ExcpDroppedNoConntrack).

local-basic-exceptions <uint64>

The number of local basic exceptions (LocalBasicExceptions).

local-exception-class

Local exception class statistics.

fptun-exception-ecmp-ndisc-needed <uint64>: The number of FPTUN_EXC_ECMP_NDISC_NEEDED exceptions (FPTUN_EXC_ECMP_NDISC_NEEDED).
fptun-exception-ether-dst <uint64>: The number of FPTUN_EXC_ETHER_DST exceptions (FPTUN_EXC_ETHER_DST).
fptun-exception-fpc <uint64>: The number of FPTUN_EXC_FPC exceptions (FPTUN_EXC_FPC).
fptun-exception-icmp-needed <uint64>: The number of FPTUN_EXC_ICMP_NEEDED exceptions (FPTUN_EXC_ICMP_NEEDED).
fptun-exception-ike-needed <uint64>: The number of FPTUN_EXC_IKE_NEEDED exceptions (FPTUN_EXC_IKE_NEEDED).
fptun-exception-ip-dst <uint64>: The number of FPTUN_EXC_IP_DST exceptions (FPTUN_EXC_IP_DST).
fptun-exception-ip-pmtu <uint64>: The number of FPTUN_EXC_IP_PMTU exceptions (FPTUN_EXC_IP_PMTU).
fptun-exception-ndisc-needed <uint64>: The number of FPTUN_EXC_NDISC_NEEDED exceptions (FPTUN_EXC_NDISC_NEEDED).
fptun-exception-nf-func <uint64>: The number of FPTUN_EXC_NF_FUNC exceptions (FPTUN_EXC_NF_FUNC).
fptun-exception-replaywin <uint64>: The number of FPTUN_EXC_REPLAYWIN exceptions (FPTUN_EXC_REPLAYWIN).
fptun-exception-socket <uint64>: The number of FPTUN_EXC_SOCKET exceptions (FPTUN_EXC_SOCKET).
fptun-exception-sp-func <uint64>: The number of FPTUN_EXC_SP_FUNC exceptions (FPTUN_EXC_SP_FUNC).
fptun-exception-tap <uint64>: The number of FPTUN_EXC_TAP exceptions (FPTUN_EXC_TAP).
fptun-exception-undef <uint64>: The number of FPTUN_EXC_UNDEF exceptions (FPTUN_EXC_UNDEF).
fptun-exception-vnb-to-vnb <uint64>: The number of FPTUN_EXC_VNB_TO_VNB exceptions (FPTUN_EXC_VNB_TO_VNB).

local-exception-type

Local exception types statistics.

fptun-basic-exception <uint64>: Number of basic exception packets for Linux reception processing (FPTUN_BASIC_EXCEPT).
fptun-eth-input-exception <uint64>: Number of FPTUN exception packets for Linux ethernet input processing (FPTUN_ETH_INPUT_EXCEPT).
fptun-eth-novnb-input-exception <uint64>: Number of FPTUN exception packets for Linux processing skipping VNB (FPTUN_ETH_NOVNB_INPUT_EXCEPT).
fptun-eth-sp-output-req <uint64>: Number of FPTUN exception packets from Linux for fast path ethernet processing (FPTUN_ETH_SP_OUTPUT_REQ).
fptun-iface-input-exception <uint64>: Number of FPTUN exception packets for Linux VNB iface processing (FPTUN_IFACE_INPUT_EXCEPT).
fptun-ipsec-sp-output-req <uint64>: Number of FPTUN exception packets from Linux for fast path IPsec processing (FPTUN_IPSEC_SP_OUTPUT_REQ).
fptun-ipv4-ipsecdone-input-exception <uint64>: Number of FPTUN exception packets for Linux IPv4 input after IPsec processing (FPTUN_IPV4_IPSECDONE_INPUT_EXCEPT).
fptun-ipv4-ipsecdone-output-exception <uint64>: Number of FPTUN exception packets for Linux IPv4 output after IPsec processing (FPTUN_IPV4_IPSECDONE_OUTPUT_EXCEPT).
fptun-ipv4-natdone-input-exception <uint64>: Number of FPTUN exception packets for Linux IPv4 input after NAT processing (FPTUN_IPV4_NATDONE_INPUT_EXCEPT).
fptun-ipv4-output-exception <uint64>: Number of FPTUN exception packets for Linux IPv4 output (FPTUN_IPV4_OUTPUT_EXCEPT).
fptun-ipv4-sp-output-req <uint64>: Number of FPTUN exception packets from Linux for fast path IPv4 processing (FPTUN_IPV4_SP_OUTPUT_REQ).
fptun-ipv6-ipsecdone-input-exception <uint64>: Number of FPTUN exception packets for Linux IPv6 input after IPsec processing (FPTUN_IPV6_IPSECDONE_INPUT_EXCEPT).
fptun-ipv6-ipsecdone-output-exception <uint64>: Number of FPTUN exception packets for Linux IPv6 output after IPsec processing (FPTUN_IPV6_IPSECDONE_OUTPUT_EXCEPT).
fptun-ipv6-output-exception <uint64>: Number of FPTUN exception packets for Linux IPv6 output (FPTUN_IPV6_OUTPUT_EXCEPT).
fptun-ipv6-sp-output-req <uint64>: Number of FPTUN exception packets from Linux for fast path IPv6 processing (FPTUN_IPV6_SP_OUTPUT_REQ).
fptun-output-exception <uint64>: Number of FPTUN exception packets for Linux interface output processing (FPTUN_OUTPUT_EXCEPT).
fptun-rfps-update <uint64>: Number of FPTUN exception packets for fast path statistics processing (FPTUN_RFPS_UPDATE).
fptun-tap <uint64>: Number of FPTUN exception packets for Linux TAP (tcpdump) (FPTUN_TAP).
fptun-traffic-generator-msg <uint64>: Number of FPTUN exception packets for fast path traffic generator processing (FPTUN_TRAFFIC_GEN_MSG).
fptun-vnb2vnb-fp-to-linux-exception <uint64>: Number of FPTUN VNB exception packets for Linux VNB input processing (FPTUN_VNB2VNB_FP_TO_LINUX_EXCEPT).
fptun-vnb2vnb-linux-to-fp-exception <uint64>: Number of FPTUN exception packets for Linux VNB processing (FPTUN_VNB2VNB_LINUX_TO_FP_EXCEPT).

local-fptun-exceptions <uint64>

The number of local fptun exceptions (LocalFPTunExceptions).

qos-sched

QoS scheduler service statistics.

interface

Interface QoS statistics.

name <string>

Interface name.

index <uint64>

Interface index.

vrfid <uint64>

Vrf Id.

enqueue-drop-no-class-packets <uint64>

The number of packets that were dropped because they matched no class (enq_drop_noclass_pkts).

enqueue-drop-policer-packets <uint64>

The number of packets that were dropped by a policer (enq_drop_meter_pkts).

enqueue-drop-queue-full-packets <uint64>

The number of packets that were dropped because a queue was full (enq_drop_qfull_pkts).

enqueue-success-packets <uint64>

The number of packets that were enqueued (enq_ok_pkts).

transmit-drop-packets <uint64>

The number of packets that were dropped during transmission (xmit_drop_pkts).

transmit-success-packets <uint64>

The number of packets that were transmitted (xmit_ok_pkts).

class

Fast-path class statistics.

class-id <uint64>: Class Id.
index <uint64>: Class index.
enqueue-drop-policer-packets <uint64>: The number of packets that were dropped by a policer (enq_drop_meter_pkts).
enqueue-drop-queue-full-packets <uint64>: The number of packets that were dropped because a queue was full (enq_drop_qfull_pkts).
enqueue-success-packets <uint64>: The number of packets that were enqueued (enq_ok_pkts).
transmit-drop-packets <uint64>: The number of packets that were dropped during transmission (xmit_drop_pkts).
transmit-success-packets <uint64>: The number of packets that were transmitted (xmit_ok_pkts).

qos-rate-limit

QoS rate limit service statistics.

green

Green statistics.

packets <uint64>: Number of green packets.
bytes <uint64>: Number of green bytes.

yellow

Yellow statistics.

packets <uint64>: Number of yellow packets.
bytes <uint64>: Number of yellow bytes.

red

Red statistics.

packets <uint64>: Number of red packets.
bytes <uint64>: Number of red bytes.

pppoe

PPPoE service statistics.

exc-in-unknown-channel <uint64>: Number of input packets sent in exception due to an unknown channel (PppoeExcInUnknownChannel).
exc-out-unknown-ethernet <uint64>: Number of output packets sent in exception due to an unknown ethernet interface (PppoeExcOutUnknownEthernet).
dropped-in-malformed-ppp-frame <uint64>: Number of input packets dropped due to a malformed PPP frame (PppoeDroppedInMalformedPppFrame).
dropped-out-prepend-failure <uint64>: Number of output packets dropped due to an mbuf prepend failure (PppoeDroppedOutPrependFailure).
dropped-in-operative <uint64>: Number of input packets dropped due to an inoperative interface (PppoeDroppedInOperative).
dropped-out-operative <uint64>: Number of output packets dropped due to an inoperative interface (PppoeDroppedOutOperative).

show ike¶

Note

requires a IPsec Application License.

vsr> show ike [vrf VRF] counters [vpn <string>] ike-sa [details] [vpn <string>] \
...            [remote-ip <string>] [remote-id <string>] [state STATE] ike-sa-count \
...            [state STATE] ipsec-sa-count [fastpath]

Show filtered SA state or general information.

Input Parameters¶

vrf VRF

Show objects in selected netns only.

`VRF` values	Description
main	The main vrf.
<string>	The vrf name.

counters

Show IKE counters.

vpn <string>: Show counters for selected VPN.

ike-sa

Show SA state.

details

Show detailed output.

vpn <string>

Show SA for selected VPN.

remote-ip <string>

Show SAs to selected remote-ip.

remote-id <string>

Show SAs to selected remote-id.

state STATE

Show SAs in selected state.

`STATE` values	Description
created	IKE SA just got created, but is not initiating nor responding yet.
connecting	IKE SA gets initiated actively or passively.
established	IKE SA is fully established.
passive	IKE SA is managed externally and does not process messages.
rekeying	IKE SA rekeying in progress.
rekeyed	IKE SA has been rekeyed (or is redundant).
deleting	IKE SA deletion in progress.
destroying	IKE SA object gets destroyed.

ike-sa-count

Show SA count.

state STATE

Only count SAs in selected state.

`STATE` values	Description
created	IKE SA just got created, but is not initiating nor responding yet.
connecting	IKE SA gets initiated actively or passively.
established	IKE SA is fully established.
passive	IKE SA is managed externally and does not process messages.
rekeying	IKE SA rekeying in progress.
rekeyed	IKE SA has been rekeyed (or is redundant).
deleting	IKE SA deletion in progress.
destroying	IKE SA object gets destroyed.

ipsec-sa-count

Show IPsec SA count (default is from Linux).

fastpath: Show IPsec SA count from Fast-Path.

show cg-nat pool-usage¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat pool-usage [vrf <string>] pool-name <string> [address ADDRESS]

Show address usage of a CG-NAT pool.

Input Parameters¶

vrf <string>

VRF.

pool-name <string> (mandatory)

IP address pool name.

address ADDRESS

IP address in the pool.

ADDRESS

An IPv4 address.

show cg-nat port-usage¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat port-usage [vrf <string>] rule-id <uint16> user-address USER-ADDRESS

Show port usage of a CG-NAT user.

Input Parameters¶

vrf <string>

VRF.

rule-id <uint16> (mandatory)

Rule id.

user-address USER-ADDRESS (mandatory)

User IP address.

`USER-ADDRESS` values	Description
<ip-address>	An IPv4 address.
<ip-address>	An IPv6 address.

show cg-nat user¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat user [vrf <string>] rule-id <uint16> [user-address USER-ADDRESS] [threshold-errors <uint32>] \
...            [usage-min <uint8>]

Show user(s) of a CG-NAT rule.

Input Parameters¶

vrf <string>

VRF.

rule-id <uint16> (mandatory)

Rule id.

user-address USER-ADDRESS

User IP address.

`USER-ADDRESS` values	Description
<ip-address>	An IPv4 address.
<ip-address>	An IPv6 address.

threshold-errors <uint32>

Users having more errors than a given threshold.

usage-min <uint8>

Users usage by at least the given rate.

show cg-nat blocks¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat blocks [vrf <string>] rule-id <uint16> user-address USER-ADDRESS

Show blocks of a CG-NAT user.

Input Parameters¶

vrf <string>

VRF.

rule-id <uint16> (mandatory)

Rule id.

user-address USER-ADDRESS (mandatory)

User IP address.

`USER-ADDRESS` values	Description
<ip-address>	An IPv4 address.
<ip-address>	An IPv6 address.

show cg-nat conntracks¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat conntracks [vrf <string>] rule-id <uint16> user-address USER-ADDRESS forward \
...            [peer-address PEER-ADDRESS] backward [peer-address PEER-ADDRESS] \
...            protocol tcp [peer-port PEER-PORT] udp [peer-port PEER-PORT] \
...            icmp [peer-id <uint16>] icmpv6 [peer-id <uint16>] gre-pptp [key <uint16>]

Show conntracks of a CG-NAT user.

Input Parameters¶

vrf <string>

VRF.

rule-id <uint16> (mandatory)

Rule id.

user-address USER-ADDRESS (mandatory)

User IP address.

`USER-ADDRESS` values	Description
<ip-address>	An IPv4 address.
<ip-address>	An IPv6 address.

forward

Filter by IP and/or port using the forward tuple (the default).

peer-address PEER-ADDRESS

Forward peer IPv4/IPv6 address.

`PEER-ADDRESS` values	Description
<A.B.C.D>	An IPv4 address.
<X:X::X:X>	An IPv6 address.

backward

Filter by IP and/or port using the backward tuple.

peer-address PEER-ADDRESS

Backward peer IPv4 address.

PEER-ADDRESS

An IPv4 address.

protocol

Filter contracks per protocol.

tcp

Show only conntracks using the TCP protocol.

peer-port PEER-PORT

Peer port.

PEER-PORT

A 16-bit port number used by a transport protocol such as TCP or UDP.

udp

Show only conntracks using the UDP protocol.

peer-port PEER-PORT

Peer port.

PEER-PORT

A 16-bit port number used by a transport protocol such as TCP or UDP.

icmp

Show only conntracks using the ICMP protocol.

peer-id <uint16>: ICMP peer identifier.

icmpv6

Show only conntracks using the ICMPv6 protocol.

peer-id <uint16>: ICMPv6 peer identifier.

gre-pptp

Show only conntracks using the GRE-PPTP protocol.

key <uint16>: GRE key.

show cg-nat conntrack-statistics¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat conntrack-statistics [vrf <string>] rule-id <uint16>

Show conntracks usage statistics of a CG-NAT rule.

Input Parameters¶

vrf <string>: VRF.
rule-id <uint16> (mandatory): Rule id.

show cg-nat port-statistics¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat port-statistics [vrf <string>] rule-id <uint16> [protocol PROTOCOL]

Show port usage statistics of a CG-NAT rule.

Input Parameters¶

vrf <string>

VRF.

rule-id <uint16> (mandatory)

Rule id.

protocol PROTOCOL

Protocol.

`PROTOCOL` values	Description
tcp	Transmission Control Protocol.
udp	User Datagram Protocol.
icmp	Internet Control Message Protocol.
gre-pptp	Generic Routing Encapsulation for Point-to-Point Tunneling Protocol.

show cg-nat block-statistics¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat block-statistics [vrf <string>] rule-id <uint16> [protocol PROTOCOL]

Show block usage statistics of a CG-NAT rule.

Input Parameters¶

vrf <string>

VRF.

rule-id <uint16> (mandatory)

Rule id.

protocol PROTOCOL

Protocol.

`PROTOCOL` values	Description
tcp	Transmission Control Protocol.
udp	User Datagram Protocol.
icmp	Internet Control Message Protocol.
gre-pptp	Generic Routing Encapsulation for Point-to-Point Tunneling Protocol.

show cg-nat hash-table-statistics¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat hash-table-statistics

Show hash table statistics.

show cg-nat mempool-usage¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat mempool-usage

Show memory pool usage.

show cg-nat statistics¶

Note

requires a CG-NAT Application License.

vsr> show cg-nat statistics

Show global statistics.

show ha-neighbor¶

Note

requires a Product License.

vsr> show ha-neighbor [vrf VRF] state

Show high-availability neighbor state.

Input Parameters¶

vrf VRF

Specify the VRF.

`VRF` values	Description
main	The main vrf.
<string>	The vrf name.

state (mandatory)

Show high-availability neighbor state.

show ha-conntrack¶

Note

requires a Product License.

vsr> show ha-conntrack [vrf VRF] [state] [cache CACHE]

Show high-availability conntrack state.

Input Parameters¶

vrf VRF

Specify the VRF.

`VRF` values	Description
main	The main vrf.
<string>	The vrf name.

state

Show high-availability conntrack state.

cache CACHE

Display cache content.

`CACHE` values	Description
internal	Display content of the internal cache.
external	Display content of the external cache.

show vxlan fdb¶

vsr> show vxlan fdb [vrf <string>] [name NAME]

Show VXLAN FDB information.

Input Parameters¶

vrf <string>

VRF to look into.

name NAME

Show FDB per interface.

NAME	An interface name.

Output Data¶

vxlan

VXLAN interface list.

name NAME

VXLAN interface name.

NAME	An interface name.

ipv4

IPv4 FDB operational state data.

fdb

IPv4 FDB operational state data.

link-layer-address LINK-LAYER-ADDRESS

The link-layer address of the FDB node.

LINK-LAYER-ADDRESS

An IEEE 802 MAC address.

ip IP (mandatory)

The IP address of the destination VXLAN tunnel endpoint where the Ethernet MAC ADDRESS resides.

IP	An IPv4 address.

link-interface LINK-INTERFACE

The outgoing interface for the VXLAN device driver to reach the remote VXLAN tunnel endpoint.

LINK-INTERFACE

An interface name.

port PORT

The UDP destination PORT number to use to connect to the remote VXLAN tunnel endpoint (default: the VXLAN dst).

PORT	A 16-bit port number used by a transport protocol such as TCP or UDP.

vni VNI

The VXLAN VNI Network Identifier (or VXLAN Segment ID) to use to connect to the remote VXLAN tunnel endpoint (default: the VXLAN vni).

VNI	Type definition representing VXLAN Segment ID / VXLAN Network Identifier value.

state STATE

FDB operational state.

`STATE` values	Description
reachable	The neighbor is known to have been reachable recently (within tens of seconds ago).
stale	The neighbor is no longer known to be reachable, but until traffic is sent to the neighbor no attempt should be made to verify its reachability.
permanent	The FDB has been permanently configured.
static	The FDB has been statically configured.
other	The FDB state is none of the above.

ipv6

IPv4 FDB operational state data.

fdb

IPv6 FDB operational state data.

link-layer-address LINK-LAYER-ADDRESS

The link-layer address of the FDB node.

LINK-LAYER-ADDRESS

An IEEE 802 MAC address.

ip IP (mandatory)

The IP address of the destination VXLAN tunnel endpoint where the Ethernet MAC ADDRESS resides.

IP	An IPv6 address.

link-interface LINK-INTERFACE

The outgoing interface for the VXLAN device driver to reach the remote VXLAN tunnel endpoint.

LINK-INTERFACE

An interface name.

port PORT

The UDP destination PORT number to use to connect to the remote VXLAN tunnel endpoint (default: the VXLAN dst).

PORT	A 16-bit port number used by a transport protocol such as TCP or UDP.

vni VNI

The VXLAN VNI Network Identifier (or VXLAN Segment ID) to use to connect to the remote VXLAN tunnel endpoint (default: the VXLAN vni).

VNI	Type definition representing VXLAN Segment ID / VXLAN Network Identifier value.

state STATE

FDB operational state.

`STATE` values	Description
reachable	The neighbor is known to have been reachable recently (within tens of seconds ago).
stale	The neighbor is no longer known to be reachable, but until traffic is sent to the neighbor no attempt should be made to verify its reachability.
permanent	The FDB has been permanently configured.
static	The FDB has been statically configured.
other	The FDB state is none of the above.

show bridge fdb¶

vsr> show bridge fdb [vrf <string>] [name NAME]

Show bridge FDB information.

Input Parameters¶

vrf <string>

The VRF to look into.

name NAME

The name of the interface for which the FDB will be displayed.

NAME	An interface name.

Output Data¶

bridge

Bridge interface list.

name NAME

The bridge interface name.

NAME	An interface name.

fdb

FDB operational state data.

link-layer-address LINK-LAYER-ADDRESS

The link-layer address of the FDB node.

LINK-LAYER-ADDRESS

An IEEE 802 MAC address.

link-interface LINK-INTERFACE

The slave interface of this bridge.

LINK-INTERFACE

An interface name.

state STATE

The FDB operational state.

`STATE` values	Description
reachable	The neighbor is known to have been reachable recently (within tens of seconds ago).
stale	The neighbor is no longer known to be reachable, but until traffic is sent to the neighbor no attempt should be made to verify its reachability.
permanent	The FDB has been permanently configured.
static	The FDB has been statically configured.
other	The FDB state is none of the above.

show dns-server¶

Note

requires a Product License.

vsr> show dns-server [vrf <string>] [l3vrf <string>]

Show DNS server information.

Input Parameters¶

vrf <string>: VRF to look into.
l3vrf <string>: Specify the l3vrf.

Output Data¶

cache

DNS server cache operational state data.

size <uint32>: DNS server cache size in bytes.
freed <uint32>: Number of records that have been removed from the cache.
inserted <uint32>: Number of records that have been inserted into the cache.

query

DNS server query operation state data.

forwarded <uint32>: Number of forwarded queries.
local <uint32>: Number of queries answered locally.

server

List of known upstream servers with operational state data.

name <string>

Server name.

port PORT

Server port.

PORT	A 16-bit port number used by a transport protocol such as TCP or UDP.

sent-queries <uint32>

Number of queries sent to this server.

failed-queries <uint32>

Number of queries sent to this server resulting in a retry or in a failure.

show certificate list¶

Note

requires a Product License.

vsr> show certificate list

Show X509 certificates list.

show certificate¶

vsr> show certificate name NAME [base64]

Show X509 certificate details.

Input Parameters¶

name NAME (mandatory)

The name of the certificate.

NAME	Certificate name.

base64

Show the certificate in base64 format.

show certificate key¶

Note

requires a Product License.

vsr> show certificate key name NAME

Show X509 certificate private key.

Input Parameters¶

name NAME (mandatory)

The name of the certificate.

NAME	Certificate name.