4.2.4. OpenStack¶
This section gathers issues that happen with Turbo Router started in an OpenStack environment.
VM start errors¶
- Symptoms
My VM can’t start, or is in a bad state (
NOSTATE
):$ nova list +--------------------------------------+------+--------+------------+-------------+------------------------------+ | ID | Name | Status | Task State | Power State | Networks | +--------------------------------------+------+--------+------------+-------------+------------------------------+ | 52ad953d-19dd-47a9-b03d-dfe565e655e1 | vm3 | ERROR | - | NOSTATE | | | b28e5aa1-05c9-494b-8f0e-0247d95bde87 | vm2 | ACTIVE | - | Running | private2=12.0.0.3 | | c4a52ed6-775d-45b3-96c2-8c2a6a1530ac | vm1 | ACTIVE | - | Running | private=11.0.0.6, 172.24.4.3 | +--------------------------------------+------+--------+------------+-------------+------------------------------+
- Hints
Check the
/var/log/nova/nova-compute.log
file forERROR
. Considering the output, check the following issues.
Not enough memory¶
- Symptoms
My VM can’t start, or is in a bad state (
NOSTATE
). On the compute node hosting the VM./var/log/nova/nova-compute.log
showsERROR
s andTRACE
s like those:Error launching a defined domain with XML: <domain type='kvm'> [instance: 52ad953d-19dd-47a9-b03d-dfe565e655e1] Instance failed to spawn ... ...: unable to map backing store for hugepages: Cannot allocate memory
- Hints
Add more memory to your compute node.
Cannot use hugepages of 1GB¶
- Symptoms
Nova displays an error “Unable to find any usable hugetlbfs mount”.
On the controller node,
/var/log/nova/nova-conductor.log
showsERROR
s andTRACE
s like this one:error: Unable to find any usable hugetlbfs mount for 1048576 KiB
- Hints
Hugepages cannot be allocated for the VM. It may be due to the size of the hugepages. Try to allocate more but smaller hugepages.
Performance degradation and security groups¶
- Symptoms
VM packet processing is slower than expected.
- Hints
Consider disabling security groups as numerous packets processing require many iptables/ebtables look-ups to direct packets properly when they’re enabled.
Refer to OpenStack documentation on how to do that considering your running version.