Configuring SNMP for IPsec/IKE

Configuring SNMP for IPsec

  • Configure the SNMP sub-agent in charge of the IPsec MIB:

    router{conf:running-sec}ipsec-snmp enable|disable
    

    SNMP for IPsec is disabled by default.

    This command enables or disables the SNMP sub-agent that handles the SW-6WIND-IPSEC-MIB::ipsec sub-tree.

Configuring SNMP for IKE

  • Configure the SNMP sub-agent in charge of the IKE MIB:

    router{conf:running-sec}ike-snmp enable|disable
    

    SNMP for IKE is disabled by default.

    This command enables or disables the SNMP sub-agent that handles the SW-6WIND-IPSEC-MIB::ike sub-tree.