ip pim¶

Note

requires a Product License.

Set PIM configuration.

vsr running config# vrf <vrf> routing interface <interface> pim

enabled¶

Enable PIM on the interface.

vsr running config# vrf <vrf> routing interface <interface> pim
vsr running pim# enabled true|false

Default value: false

hello-interval¶

unit: seconds

Set periodic interval for hello messages.

vsr running config# vrf <vrf> routing interface <interface> pim
vsr running pim# hello-interval <1-max>

Default value: 30

hello-holdtime¶

unit: seconds

Set hello holdtime.

vsr running config# vrf <vrf> routing interface <interface> pim
vsr running pim# hello-holdtime <1-max>

bsm¶

Enables BSM (BootStrap Messages) support on the interface.

vsr running config# vrf <vrf> routing interface <interface> pim
vsr running pim# bsm true|false

Default value: true

unicast-bsm¶

Accept/Send unicast BSM (BootStrap Messages) on the interface.

vsr running config# vrf <vrf> routing interface <interface> pim
vsr running pim# unicast-bsm true|false

Default value: true

dr-priority¶

Set DR (designated router) priority allowing a network administrator to give preference to a particular router in the DR election process by giving it a numerically larger DR Priority.

vsr running config# vrf <vrf> routing interface <interface> pim
vsr running pim# dr-priority <1-max>

Default value: 1

use-source¶

Set primary address of the interface set by user.

vsr running config# vrf <vrf> routing interface <interface> pim
vsr running pim# use-source USE-SOURCE

`USE-SOURCE` values	Description
`<ipv4-address>`	An IPv4 address.
`<ipv6-address>`	An IPv6 address.